Module Name: src
Committed By: kre
Date: Sat Jun 17 07:22:12 UTC 2017
Modified Files:
src/bin/sh: exec.c expand.c memalloc.c memalloc.h parser.c
Log Message:
Many internal memory management type fixes.
PR bin/52302 (core dump with interactive shell, here doc and error
on same line) is fixed. (An old bug.)
echo "$( echo x; for a in $( seq 1000 ); do printf '%s\n'; done; echo y )"
consistently prints 1002 lines (x, 1000 empty ones, then y) as it should
(And you don't want to know what it did before, or why.) (Another old one.)
(Recently added) Problems with ~ expansion fixed (mem management related).
Proper fix for the cwrappers configure problem (which includes the quick
fix that was done earlier, but extends upon that to be correct). (This was
another newly added problem.)
And the really devious (and rare) old bug - if STACKSTRNUL() needs to
allocate a new buffer in which to store the \0, calculate the size of
the string space remaining correctly, unlike when SPUTC() grows the
buffer, there is no actual data being stored in the STACKSTRNUL()
case - the string space remaining was calculated as one byte too few.
That would be harmless, unless the next buffer also filled, in which
case it was assumed that it was really full, not one byte less, meaning
one junk char (a nul, or anything) was being copied into the next (even
bigger buffer) corrupting the data.
Consistent use of stalloc() to allocate a new block of (stack) memory,
and grabstackstr() to claim a block of (stack) memory that had already
been occupied but not claimed as in use. Since grabstackstr is implemented
as just a call to stalloc() this is a no-op change in practice, but makes
it much easier to comprehend what is really happening. Previous code
sometimes used stalloc() when the use case was really for grabstackstr().
Change grabstackstr() to actually use the arg passed to it, instead of
(not much better than) guessing how much space to claim,
More care when using unstalloc()/ungrabstackstr() to return space, and in
particular when the stack must be returned to its previous state, rather than
just returning no-longer needed space, neither of those work. They also don't
work properly if there have been (really, even might have been) any stack mem
allocations since the last stalloc()/grabstackstr(). (If we know there
cannot have been then the alloc/release sequence is kind of pointless.)
To work correctly in general we must use setstackmark()/popstackmark() so
do that when needed. Have those also save/restore the top of stack string
space remaining.
[Aside: for those reading this, the "stack" mentioned is not
in any way related to the thing used for maintaining the C
function call state, ie: the "stack segment" of the program,
but the shell's internal memory management strategy.]
More comments to better explain what is happening in some cases.
Also cleaned up some hopelessly broken DEBUG mode data that were
recently added (no effect on anyone but the poor semi-human attempting
to make sense of it...).
User visible changes:
Proper counting of line numbers when a here document is delimited
by a multi-line end-delimiter, as in
cat << 'REALLY
END'
here doc line 1
here doc line 2
REALLY
END
(which is an obscure case, but nothing says should not work.) The \n
in the end-delimiter of the here doc (the last one) was not incrementing
the line number, which from that point on in the script would be 1 too
low (or more, for end-delimiters with more than one \n in them.)
With tilde expansion:
unset HOME; echo ~
changed to return getpwuid(getuid())->pw_home instead of failing (returning ~)
POSIX says this is unspecified, which makes it difficult for a script to
compensate for being run without HOME set (as in env -i sh script), so
while not able to be used portably, this seems like a useful extension
(and is implemented the same way by some other shells).
Further, with
HOME=; printf %s ~
we now write nothing (which is required by POSIX - which requires ~ to
expand to the value of $HOME if it is set) previously if $HOME (in this
case) or a user's directory in the passwd file (for ~user) were a null
STRING, We failed the ~ expansion and left behind '~' or '~user'.
To generate a diff of this commit:
cvs rdiff -u -r1.49 -r1.50 src/bin/sh/exec.c
cvs rdiff -u -r1.115 -r1.116 src/bin/sh/expand.c
cvs rdiff -u -r1.29 -r1.30 src/bin/sh/memalloc.c
cvs rdiff -u -r1.16 -r1.17 src/bin/sh/memalloc.h
cvs rdiff -u -r1.137 -r1.138 src/bin/sh/parser.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
