Module Name: src
Committed By: nat
Date: Thu Dec 22 11:05:55 UTC 2022
Modified Files:
src/distrib/sets/lists/man: mi
src/share/man/man4: Makefile
src/sys/arch/alpha/conf: GENERIC
src/sys/arch/amd64/conf: ALL
src/sys/arch/atari/conf: ATARITT FALCON GENERIC.in HADES HADES.in
src/sys/arch/i386/conf: ALL
src/sys/arch/mac68k/conf: GENERIC
src/sys/arch/next68k/conf: GENERIC SLAB
src/sys/dev/scsipi: files.scsipi
Added Files:
src/share/man/man4: dse.4
src/sys/dev/scsipi: if_dse.c
Log Message:
Driver for DaynaPORT SCSI/Link (dse.4).
Written by Hiroshi Noguchi, of which an updated version was posted to
port-mac68k in 2001.
Attachments were added to kernel configs for platforms that already had
the Cabletron (se.4) driver added, although other platorms may benefit.
Reviewed on tech-net by Izumi Tsutsui.
To generate a diff of this commit:
cvs rdiff -u -r1.1757 -r1.1758 src/distrib/sets/lists/man/mi
cvs rdiff -u -r1.730 -r1.731 src/share/man/man4/Makefile
cvs rdiff -u -r0 -r1.1 src/share/man/man4/dse.4
cvs rdiff -u -r1.416 -r1.417 src/sys/arch/alpha/conf/GENERIC
cvs rdiff -u -r1.174 -r1.175 src/sys/arch/amd64/conf/ALL
cvs rdiff -u -r1.125 -r1.126 src/sys/arch/atari/conf/ATARITT
cvs rdiff -u -r1.122 -r1.123 src/sys/arch/atari/conf/FALCON
cvs rdiff -u -r1.124 -r1.125 src/sys/arch/atari/conf/GENERIC.in
cvs rdiff -u -r1.120 -r1.121 src/sys/arch/atari/conf/HADES
cvs rdiff -u -r1.16 -r1.17 src/sys/arch/atari/conf/HADES.in
cvs rdiff -u -r1.503 -r1.504 src/sys/arch/i386/conf/ALL
cvs rdiff -u -r1.235 -r1.236 src/sys/arch/mac68k/conf/GENERIC
cvs rdiff -u -r1.153 -r1.154 src/sys/arch/next68k/conf/GENERIC
cvs rdiff -u -r1.60 -r1.61 src/sys/arch/next68k/conf/SLAB
cvs rdiff -u -r1.43 -r1.44 src/sys/dev/scsipi/files.scsipi
cvs rdiff -u -r0 -r1.1 src/sys/dev/scsipi/if_dse.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/distrib/sets/lists/man/mi
diff -u src/distrib/sets/lists/man/mi:1.1757 src/distrib/sets/lists/man/mi:1.1758
--- src/distrib/sets/lists/man/mi:1.1757 Mon Nov 21 22:01:32 2022
+++ src/distrib/sets/lists/man/mi Thu Dec 22 11:05:54 2022
@@ -1,4 +1,4 @@
-# $NetBSD: mi,v 1.1757 2022/11/21 22:01:32 christos Exp $
+# $NetBSD: mi,v 1.1758 2022/12/22 11:05:54 nat Exp $
#
# Note: don't delete entries from here - mark them as "obsolete" instead.
#
@@ -1060,6 +1060,7 @@
./usr/share/man/cat4/drm.0 man-sys-catman .cat
./usr/share/man/cat4/drum.0 man-sys-catman .cat
./usr/share/man/cat4/drvctl.0 man-sys-catman .cat
+./usr/share/man/cat4/dse.0 man-sys-catman .cat
./usr/share/man/cat4/dtide.0 man-sys-catman .cat
./usr/share/man/cat4/dtv.0 man-sys-catman .cat
./usr/share/man/cat4/dtviic.0 man-sys-catman .cat
@@ -4331,6 +4332,7 @@
./usr/share/man/html4/drm.html man-sys-htmlman html
./usr/share/man/html4/drum.html man-sys-htmlman html
./usr/share/man/html4/drvctl.html man-sys-htmlman html
+./usr/share/man/html4/dse.html man-sys-htmlman html
./usr/share/man/html4/dtide.html man-sys-htmlman html
./usr/share/man/html4/dtv.html man-sys-htmlman html
./usr/share/man/html4/dtviic.html man-sys-htmlman html
@@ -7374,6 +7376,7 @@
./usr/share/man/man4/drm.4 man-sys-man .man
./usr/share/man/man4/drum.4 man-sys-man .man
./usr/share/man/man4/drvctl.4 man-sys-man .man
+./usr/share/man/man4/dse.4 man-sys-man .man
./usr/share/man/man4/dtide.4 man-sys-man .man
./usr/share/man/man4/dtv.4 man-sys-man .man
./usr/share/man/man4/dtviic.4 man-sys-man .man
Index: src/share/man/man4/Makefile
diff -u src/share/man/man4/Makefile:1.730 src/share/man/man4/Makefile:1.731
--- src/share/man/man4/Makefile:1.730 Mon Nov 21 21:24:00 2022
+++ src/share/man/man4/Makefile Thu Dec 22 11:05:54 2022
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.730 2022/11/21 21:24:00 brad Exp $
+# $NetBSD: Makefile,v 1.731 2022/12/22 11:05:54 nat Exp $
# @(#)Makefile 8.1 (Berkeley) 6/18/93
MAN= aac.4 ac97.4 acardide.4 aceride.4 acphy.4 \
@@ -20,7 +20,8 @@ MAN= aac.4 ac97.4 acardide.4 aceride.4 a
clockctl.4 cmdide.4 cmpci.4 cms.4 cnw.4 \
com.4 coram.4 crypto.4 cs80bus.4 cuda.4 cypide.4 cxdtv.4 \
ddb.4 ddc.4 dge.4 dk.4 dm.4 dmoverio.4 \
- dmphy.4 dpt.4 dpti.4 drm.4 drum.4 drvctl.4 dtv.4 dtviic.4 dwctwo.4 \
+ dmphy.4 dpt.4 dpti.4 drm.4 drum.4 drvctl.4 dse.4 dtv.4 dtviic.4 \
+ dwctwo.4 \
eap.4 ebus.4 edc.4 elmc.4 emuxki.4 ena.4 envsys.4 ep.4 \
eqos.4 esa.4 esiop.4 esm.4 eso.4 et.4 etphy.4 exphy.4 \
fd.4 finsio.4 flash.4 fms.4 fss.4 \
Index: src/sys/arch/alpha/conf/GENERIC
diff -u src/sys/arch/alpha/conf/GENERIC:1.416 src/sys/arch/alpha/conf/GENERIC:1.417
--- src/sys/arch/alpha/conf/GENERIC:1.416 Thu Sep 29 10:10:05 2022
+++ src/sys/arch/alpha/conf/GENERIC Thu Dec 22 11:05:54 2022
@@ -1,4 +1,4 @@
-# $NetBSD: GENERIC,v 1.416 2022/09/29 10:10:05 riastradh Exp $
+# $NetBSD: GENERIC,v 1.417 2022/12/22 11:05:54 nat Exp $
#
# This machine description file is used to generate the default NetBSD
# kernel.
@@ -19,7 +19,7 @@ include "arch/alpha/conf/std.alpha"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-ident "GENERIC-$Revision: 1.416 $"
+ident "GENERIC-$Revision: 1.417 $"
maxusers 32
@@ -491,6 +491,7 @@ scsibus* at scsi?
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
sd* at scsibus? target ? lun ? # SCSI disk drives
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # Cabletron SCSI<->Ethernet
ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE
ss* at scsibus? target ? lun ? # SCSI scanners
Index: src/sys/arch/amd64/conf/ALL
diff -u src/sys/arch/amd64/conf/ALL:1.174 src/sys/arch/amd64/conf/ALL:1.175
--- src/sys/arch/amd64/conf/ALL:1.174 Sat Sep 24 11:05:17 2022
+++ src/sys/arch/amd64/conf/ALL Thu Dec 22 11:05:55 2022
@@ -1,4 +1,4 @@
-# $NetBSD: ALL,v 1.174 2022/09/24 11:05:17 riastradh Exp $
+# $NetBSD: ALL,v 1.175 2022/12/22 11:05:55 nat Exp $
# From NetBSD: GENERIC,v 1.787 2006/10/01 18:37:54 bouyer Exp
#
# ALL machine description file
@@ -17,7 +17,7 @@ include "arch/amd64/conf/std.amd64"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-#ident "ALL-$Revision: 1.174 $"
+#ident "ALL-$Revision: 1.175 $"
maxusers 64 # estimated number of users
@@ -828,6 +828,7 @@ cd* at scsibus? target ? lun ? # SCSI CD
ch* at scsibus? target ? lun ? # SCSI autochangers
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
ss* at scsibus? target ? lun ? # SCSI scanners
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # SCSI ethernet adapters
uk* at scsibus? target ? lun ? # SCSI unknown
Index: src/sys/arch/atari/conf/ATARITT
diff -u src/sys/arch/atari/conf/ATARITT:1.125 src/sys/arch/atari/conf/ATARITT:1.126
--- src/sys/arch/atari/conf/ATARITT:1.125 Sun Aug 7 02:55:46 2022
+++ src/sys/arch/atari/conf/ATARITT Thu Dec 22 11:05:55 2022
@@ -1,5 +1,5 @@
#
-# $NetBSD: ATARITT,v 1.125 2022/08/07 02:55:46 simonb Exp $
+# $NetBSD: ATARITT,v 1.126 2022/12/22 11:05:55 nat Exp $
#
# This file was automatically created. Changes will be
# lost when running makeconf in this directory.
@@ -90,4 +90,5 @@ et4k0 at vme0 # Crazy Dots II
scsibus* at scsi? # SCSI bus
sd* at scsibus? target ? lun ? # SCSI disk drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # SCSI ethernet
Index: src/sys/arch/atari/conf/FALCON
diff -u src/sys/arch/atari/conf/FALCON:1.122 src/sys/arch/atari/conf/FALCON:1.123
--- src/sys/arch/atari/conf/FALCON:1.122 Sun Aug 7 02:55:46 2022
+++ src/sys/arch/atari/conf/FALCON Thu Dec 22 11:05:55 2022
@@ -1,5 +1,5 @@
#
-# $NetBSD: FALCON,v 1.122 2022/08/07 02:55:46 simonb Exp $
+# $NetBSD: FALCON,v 1.123 2022/12/22 11:05:55 nat Exp $
#
# This file was automatically created. Changes will be
# lost when running makeconf in this directory.
@@ -94,4 +94,5 @@ cd* at atapibus? drive ? # ATAPI CD-ROM
scsibus* at scsi? # SCSI bus
sd* at scsibus? target ? lun ? # SCSI disk drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # SCSI ethernet
Index: src/sys/arch/atari/conf/GENERIC.in
diff -u src/sys/arch/atari/conf/GENERIC.in:1.124 src/sys/arch/atari/conf/GENERIC.in:1.125
--- src/sys/arch/atari/conf/GENERIC.in:1.124 Sun Aug 7 02:52:24 2022
+++ src/sys/arch/atari/conf/GENERIC.in Thu Dec 22 11:05:55 2022
@@ -1,5 +1,5 @@
#
-# $NetBSD: GENERIC.in,v 1.124 2022/08/07 02:52:24 simonb Exp $
+# $NetBSD: GENERIC.in,v 1.125 2022/12/22 11:05:55 nat Exp $
#
# Generic atari
#
@@ -371,6 +371,7 @@ cd* at scsibus? target ? lun ? # SCSI C
#st* at scsibus? target ? lun ? # SCSI tape drives
#ch* at scsibus? target ? lun ? # SCSI autochangers
#ss* at scsibus? target ? lun ? # SCSI scanners
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # SCSI ethernet
#uk* at scsibus? target ? lun ? # SCSI unknown
#endif /* ! SMALL030_KERNEL */
Index: src/sys/arch/atari/conf/HADES
diff -u src/sys/arch/atari/conf/HADES:1.120 src/sys/arch/atari/conf/HADES:1.121
--- src/sys/arch/atari/conf/HADES:1.120 Sun Aug 7 02:55:46 2022
+++ src/sys/arch/atari/conf/HADES Thu Dec 22 11:05:55 2022
@@ -1,5 +1,5 @@
#
-# $NetBSD: HADES,v 1.120 2022/08/07 02:55:46 simonb Exp $
+# $NetBSD: HADES,v 1.121 2022/12/22 11:05:55 nat Exp $
#
# This file was automatically created. Changes will be
# lost when running makeconf in this directory.
@@ -113,6 +113,7 @@ st* at scsibus? target ? lun ? # SCSI ta
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
ss* at scsibus? target ? lun ? # SCSI scanners
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # SCSI ethernet
uk* at scsibus? target ? lun ? # SCSI unknown
ne0 at isa0 port 0x300 irq 5 # NE2000 ethernet
Index: src/sys/arch/atari/conf/HADES.in
diff -u src/sys/arch/atari/conf/HADES.in:1.16 src/sys/arch/atari/conf/HADES.in:1.17
--- src/sys/arch/atari/conf/HADES.in:1.16 Sat Mar 31 04:19:41 2018
+++ src/sys/arch/atari/conf/HADES.in Thu Dec 22 11:05:55 2022
@@ -1,5 +1,5 @@
#
-# $NetBSD: HADES.in,v 1.16 2018/03/31 04:19:41 tsutsui Exp $
+# $NetBSD: HADES.in,v 1.17 2022/12/22 11:05:55 nat Exp $
#
# Medusa-Hades
#
@@ -57,6 +57,7 @@ cd* at scsibus? target ? lun ? # SCSI C
#if !defined(SMALL030_KERNEL)
ch* at scsibus? target ? lun ? # SCSI autochangers
ss* at scsibus? target ? lun ? # SCSI scanners
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # SCSI ethernet
uk* at scsibus? target ? lun ? # SCSI unknown
#endif /* SMALL030_KERNEL */
Index: src/sys/arch/i386/conf/ALL
diff -u src/sys/arch/i386/conf/ALL:1.503 src/sys/arch/i386/conf/ALL:1.504
--- src/sys/arch/i386/conf/ALL:1.503 Sat Sep 24 11:05:17 2022
+++ src/sys/arch/i386/conf/ALL Thu Dec 22 11:05:55 2022
@@ -1,4 +1,4 @@
-# $NetBSD: ALL,v 1.503 2022/09/24 11:05:17 riastradh Exp $
+# $NetBSD: ALL,v 1.504 2022/12/22 11:05:55 nat Exp $
# From NetBSD: GENERIC,v 1.787 2006/10/01 18:37:54 bouyer Exp
#
# ALL machine description file
@@ -17,7 +17,7 @@ include "arch/i386/conf/std.i386"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-#ident "ALL-$Revision: 1.503 $"
+#ident "ALL-$Revision: 1.504 $"
maxusers 64 # estimated number of users
@@ -906,6 +906,7 @@ cd* at scsibus? target ? lun ? # SCSI CD
ch* at scsibus? target ? lun ? # SCSI autochangers
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
ss* at scsibus? target ? lun ? # SCSI scanners
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # SCSI ethernet adapters
uk* at scsibus? target ? lun ? # SCSI unknown
Index: src/sys/arch/mac68k/conf/GENERIC
diff -u src/sys/arch/mac68k/conf/GENERIC:1.235 src/sys/arch/mac68k/conf/GENERIC:1.236
--- src/sys/arch/mac68k/conf/GENERIC:1.235 Sun Aug 7 02:52:27 2022
+++ src/sys/arch/mac68k/conf/GENERIC Thu Dec 22 11:05:55 2022
@@ -1,4 +1,4 @@
-# $NetBSD: GENERIC,v 1.235 2022/08/07 02:52:27 simonb Exp $
+# $NetBSD: GENERIC,v 1.236 2022/12/22 11:05:55 nat Exp $
#
# GENERIC machine description file
#
@@ -22,7 +22,7 @@ include "arch/mac68k/conf/std.mac68k"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-#ident "GENERIC-$Revision: 1.235 $"
+#ident "GENERIC-$Revision: 1.236 $"
makeoptions COPTS="-O2 -fno-reorder-blocks -fno-omit-frame-pointer"
# See share/mk/sys.mk. -fno-omit-frame-pointer is necessary for
@@ -251,6 +251,7 @@ sd* at scsibus? target ? lun ? # SCSI di
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # SCSI ethernet
ss* at scsibus? target ? lun ? # SCSI scanners
uk* at scsibus? target ? lun ? # SCSI unknown
Index: src/sys/arch/next68k/conf/GENERIC
diff -u src/sys/arch/next68k/conf/GENERIC:1.153 src/sys/arch/next68k/conf/GENERIC:1.154
--- src/sys/arch/next68k/conf/GENERIC:1.153 Sun Aug 7 02:52:28 2022
+++ src/sys/arch/next68k/conf/GENERIC Thu Dec 22 11:05:55 2022
@@ -1,4 +1,4 @@
-# $NetBSD: GENERIC,v 1.153 2022/08/07 02:52:28 simonb Exp $
+# $NetBSD: GENERIC,v 1.154 2022/12/22 11:05:55 nat Exp $
#
# GENERIC machine description file
#
@@ -22,7 +22,7 @@ include "arch/next68k/conf/std.next68k"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-#ident "GENERIC-$Revision: 1.153 $"
+#ident "GENERIC-$Revision: 1.154 $"
makeoptions COPTS="-O2 -fno-reorder-blocks -fno-omit-frame-pointer"
# See share/mk/sys.mk. -fno-omit-frame-pointer is necessary for
@@ -206,6 +206,7 @@ sd* at scsibus? target ? lun ? # SCSI di
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
+dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
se* at scsibus? target ? lun ? # SCSI ethernet
ss* at scsibus? target ? lun ? # SCSI scanners
uk* at scsibus? target ? lun ? # SCSI unknown
Index: src/sys/arch/next68k/conf/SLAB
diff -u src/sys/arch/next68k/conf/SLAB:1.60 src/sys/arch/next68k/conf/SLAB:1.61
--- src/sys/arch/next68k/conf/SLAB:1.60 Thu Jan 21 06:51:55 2021
+++ src/sys/arch/next68k/conf/SLAB Thu Dec 22 11:05:55 2022
@@ -1,4 +1,4 @@
-# $NetBSD: SLAB,v 1.60 2021/01/21 06:51:55 nia Exp $
+# $NetBSD: SLAB,v 1.61 2022/12/22 11:05:55 nat Exp $
#
# deberg's development machine
#
@@ -158,6 +158,7 @@ scsibus* at scsi?
#st* at scsibus? target ? lun ? # SCSI tape drives
#cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
#ch* at scsibus? target ? lun ? # SCSI autochangers
+#dse* at scsibus? target ? lun ? # SCSI ethernet (Dayna)
#se* at scsibus? target ? lun ? # SCSI ethernet
#ss* at scsibus? target ? lun ? # SCSI scanners
#uk* at scsibus? target ? lun ? # SCSI unknown
Index: src/sys/dev/scsipi/files.scsipi
diff -u src/sys/dev/scsipi/files.scsipi:1.43 src/sys/dev/scsipi/files.scsipi:1.44
--- src/sys/dev/scsipi/files.scsipi:1.43 Thu Apr 14 16:50:26 2022
+++ src/sys/dev/scsipi/files.scsipi Thu Dec 22 11:05:55 2022
@@ -1,4 +1,4 @@
-# $NetBSD: files.scsipi,v 1.43 2022/04/14 16:50:26 pgoyette Exp $
+# $NetBSD: files.scsipi,v 1.44 2022/12/22 11:05:55 nat Exp $
#
# Config file and device description for machine-independent SCSI code.
# Included by ports that need it. Ports that use it must provide
@@ -40,6 +40,10 @@ device ch
attach ch at scsibus
file dev/scsipi/ch.c ch needs-flag
+device dse: ifnet, ether, arp
+attach dse at scsibus
+file dev/scsipi/if_dse.c dse needs-flag
+
device se: ifnet, ether, arp
attach se at scsibus
file dev/scsipi/if_se.c se needs-flag
Added files:
Index: src/share/man/man4/dse.4
diff -u /dev/null src/share/man/man4/dse.4:1.1
--- /dev/null Thu Dec 22 11:05:56 2022
+++ src/share/man/man4/dse.4 Thu Dec 22 11:05:54 2022
@@ -0,0 +1,82 @@
+.\" $NetBSD: dse.4,v 1.1 2022/12/22 11:05:54 nat Exp $
+.\" Copyright (c) 2022 Nathanial Sloss <nathanialsl...@yahoo.com.au>
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd December 16, 2022
+.Dt DSE 4
+.Os
+.Sh NAME
+.Nm dse
+.Nd DaynaPORT SCSI/Link SCSI bus Ethernet interface driver
+.Sh SYNOPSIS
+.Cd "dse* at scsibus? target ? lun ?"
+.Sh DESCRIPTION
+The
+.Nm
+driver supports the
+.Tn DaynaPORT
+SCSI/Link
+.Tn SCSI
+bus
+.Tn Ethernet
+interface.
+These devices can also be currently emulated on a Raspberry Pi with an RaSCSI
+board running PiSCSI software.
+.Pp
+There are additionally
+.Fn open ,
+.Fn close ,
+and
+.Fn ioctl
+entry points so that the device also appears as a
+.Tn SCSI
+device.
+Currently these functions are place holders.
+.Sh SEE ALSO
+.Xr scsi 4 ,
+.Xr ifconfig 8
+.Sh AUTHORS
+.An -nosplit
+.An Hiroshi Noguchi Aq Mt n...@ff.iij4u.or.jp
+.Pp
+.An -nosplit
+.An Matt Sandstrom Aq Mt matt...@beauty.se
+who modified this driver for
+.Nx 1.5.3
+.Sh BUGS
+This device doesn't conform to the
+.Tn SCSI
+specification.
+Also that this manual page was written by
+.An -nosplit
+.An Nathanial Sloss Aq Mt nathanialsl...@yahoo.com.au
+.Sh REFERNCES
+.Tn RaSCSI
+http://retropc.net/gimons/rascsi/
+.Pp
+.Tn PiSCSI (formally RaSCSI Reloaded)
+https://github.com/PiSCSI
+.Pp
+.Tn Raspberry Pi
+http://raspberrypi.org
Index: src/sys/dev/scsipi/if_dse.c
diff -u /dev/null src/sys/dev/scsipi/if_dse.c:1.1
--- /dev/null Thu Dec 22 11:05:56 2022
+++ src/sys/dev/scsipi/if_dse.c Thu Dec 22 11:05:55 2022
@@ -0,0 +1,1405 @@
+/* $NetBSD: if_dse.c,v 1.1 2022/12/22 11:05:55 nat Exp $ */
+
+/*
+ * Driver for DaynaPORT SCSI/Link SCSI-Ethernet
+ *
+ * Written by Hiroshi Noguchi <n...@ff.iij4u.or.jp>
+ *
+ * Modified by Matt Sandstrom <matt...@beauty.se> for NetBSD 1.5.3
+ *
+ * This driver is written based on "if_se.c".
+ */
+
+/*
+ * Copyright (c) 1997 Ian W. Dall <ian.d...@dsto.defence.gov.au>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Ian W. Dall.
+ * 4. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+
+#include "opt_inet.h"
+#include "opt_net_mpsafe.h"
+#include "opt_atalk.h"
+
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/callout.h>
+#include <sys/syslog.h>
+#include <sys/kernel.h>
+#include <sys/file.h>
+#include <sys/stat.h>
+#include <sys/ioctl.h>
+#include <sys/buf.h>
+#include <sys/uio.h>
+#include <sys/malloc.h>
+#include <sys/errno.h>
+#include <sys/device.h>
+#include <sys/disklabel.h>
+#include <sys/disk.h>
+#include <sys/proc.h>
+#include <sys/conf.h>
+
+#include <sys/workqueue.h>
+
+#include <dev/scsipi/scsipi_all.h>
+#include <dev/scsipi/scsiconf.h>
+
+#include <sys/mbuf.h>
+
+#include <sys/socket.h>
+#include <net/if.h>
+#include <net/if_dl.h>
+#include <net/if_ether.h>
+#include <net/if_media.h>
+
+#ifdef INET
+#include <netinet/in.h>
+#include <netinet/if_inarp.h>
+#endif
+
+#ifdef NETATALK
+#include <netatalk/at.h>
+#endif
+
+#include <net/bpf.h>
+
+
+/*
+ * debug flag
+ */
+#if 0
+#define DSE_DEBUG
+#endif
+
+
+#define DSE_TIMEOUT 100000
+#define DSE_OUTSTANDING 4
+#define DSE_RETRIES 4
+#define DSE_MINSIZE 60
+
+#define DSE_HEADER_TX 4
+#define DSE_TAIL_TX 4
+#define DSE_EXTRAS_TX (DSE_HEADER_TX + DSE_TAIL_TX)
+
+#define DSE_HEADER_RX 6
+#define DSE_TAIL_RX 0
+#define DSE_EXTRAS_RX (DSE_HEADER_RX + DSE_TAIL_RX)
+
+#define MAX_BYTES_RX (ETHERMTU + sizeof(struct ether_header) + ETHER_CRC_LEN)
+
+/* 10 full length packets appears to be the max ever returned. 16k is OK */
+#define RBUF_LEN (16 * 1024)
+
+/*
+ * Tuning parameters:
+ * We will attempt to adapt to polling fast enough to get RDATA_GOAL packets
+ * per read
+ */
+#define RDATA_MAX 10 /* maximum of returned packets (guessed) */
+#define RDATA_GOAL 8
+
+/*
+ * maximum of available multicast address entries (guessed)
+ */
+#define DSE_MCAST_MAX 10
+
+
+/* dse_poll and dse_poll0 are the normal polling rate and the minimum
+ * polling rate respectively. dse_poll0 should be chosen so that at
+ * maximum ethernet speed, we will read nearly RDATA_MAX packets. dse_poll
+ * should be chosen for reasonable maximum latency.
+ * In practice, if we are being saturated with min length packets, we
+ * can't poll fast enough. Polling with zero delay actually
+ * worsens performance. dse_poll0 is enforced to be always at least 1
+ */
+#if MAC68K_DEBUG
+#define DSE_POLL 50 /* default in milliseconds */
+#define DSE_POLL0 30 /* default in milliseconds */
+#else
+#define DSE_POLL 80 /* default in milliseconds */
+#define DSE_POLL0 40 /* default in milliseconds */
+#endif
+int dse_poll = 0; /* Delay in ticks set at attach time */
+int dse_poll0 = 0;
+int dse_max_received = 0; /* Instrumentation */
+
+
+
+
+/*==========================================
+ data type defs
+==========================================*/
+typedef struct scsipi_inquiry_data dayna_ether_inquiry_data;
+
+typedef struct {
+ uint8_t opcode[2];
+ uint8_t byte3;
+ uint8_t length[2];
+ uint8_t byte6;
+} scsi_dayna_ether_generic;
+
+#define DAYNA_CMD_SEND 0x0A /* same as generic "Write" */
+#define DAYNA_CMD_RECV 0x08 /* same as generic "Read" */
+
+#define DAYNA_CMD_GET_ADDR 0x09 /* ???: read MAC address ? */
+#define REQ_LEN_GET_ADDR 0x12
+
+#define DAYNA_CMD_SET_MULTI 0x0D /* set multicast address */
+
+#define DAYNA_CMD_VENDOR1 0x0E /* ???: initialize signal ? */
+
+#define IS_SEND(generic) ((generic)->opcode == DAYNA_CMD_SEND)
+#define IS_RECV(generic) ((generic)->opcode == DAYNA_CMD_RECV)
+
+struct dse_softc {
+ device_t sc_dev;
+ struct ethercom sc_ethercom; /* Ethernet common part */
+ struct scsipi_periph *sc_periph;/* contains our targ, lun, etc. */
+
+ struct callout sc_recv_ch;
+ struct kmutex sc_iflock;
+ struct if_percpuq *sc_ipq;
+ struct workqueue *sc_recv_wq, *sc_send_wq;
+ struct work sc_recv_work, sc_send_work;
+ int sc_recv_work_pending, sc_send_work_pending;
+
+ char *sc_tbuf;
+ char *sc_rbuf;
+ int sc_debug;
+ int sc_flags;
+ int sc_last_timeout;
+ int sc_enabled;
+ int sc_attach_state;
+};
+
+/* bit defs of "sc_flags" */
+#define DSE_NEED_RECV 0x1
+
+static int dsematch(device_t, cfdata_t, void *);
+static void dseattach(device_t, device_t, void *);
+static int dsedetach(device_t, int);
+
+static void dse_ifstart(struct ifnet *);
+static void dse_send_worker(struct work *wk, void *cookie);
+
+static void dsedone(struct scsipi_xfer *, int);
+static int dse_ioctl(struct ifnet *, u_long, void *);
+static void dsewatchdog(struct ifnet *);
+
+static void dse_recv_callout(void *);
+static void dse_recv_worker(struct work *wk, void *cookie);
+static void dse_recv(struct dse_softc *);
+static struct mbuf* dse_get(struct dse_softc *, uint8_t *, int);
+static int dse_read(struct dse_softc *, uint8_t *, int);
+
+static int dse_init_adaptor(struct dse_softc *);
+static int dse_get_addr(struct dse_softc *, uint8_t *);
+static int dse_set_multi(struct dse_softc *);
+
+static int dse_reset(struct dse_softc *);
+
+#if 0 /* 07/16/2000 comment-out */
+static int dse_set_mode(struct dse_softc *, int, int);
+#endif
+static int dse_init(struct dse_softc *);
+static void dse_stop(struct dse_softc *);
+
+#if 0
+static __inline uint16_t ether_cmp(void *, void *);
+#endif
+
+static inline int dse_scsipi_cmd(struct scsipi_periph *periph,
+ struct scsipi_generic *scsipi_cmd,
+ int cmdlen, u_char *data_addr, int datalen,
+ int retries, int timeout, struct buf *bp,
+ int flags);
+
+int dse_enable(struct dse_softc *);
+void dse_disable(struct dse_softc *);
+
+
+CFATTACH_DECL_NEW(dse, sizeof(struct dse_softc),
+ dsematch, dseattach, dsedetach, NULL);
+
+extern struct cfdriver dse_cd;
+
+dev_type_open(dseopen);
+dev_type_close(dseclose);
+dev_type_ioctl(dseioctl);
+
+const struct cdevsw dse_cdevsw = {
+ .d_open = dseopen,
+ .d_close = dseclose,
+ .d_read = noread,
+ .d_write = nowrite,
+ .d_ioctl = dseioctl,
+ .d_stop = nostop,
+ .d_tty = notty,
+ .d_poll = nopoll,
+ .d_mmap = nommap,
+ .d_kqfilter = nokqfilter,
+ .d_discard = nodiscard,
+ .d_flag = D_OTHER | D_MPSAFE
+};
+
+const struct scsipi_periphsw dse_switch = {
+
+ NULL, /* Use default error handler */
+ NULL, /* have no queue */
+ NULL, /* have no async handler */
+ dsedone, /* deal with stats at interrupt time */
+};
+
+struct scsipi_inquiry_pattern dse_patterns[] = {
+ { T_PROCESSOR, T_FIXED,
+ "Dayna", "SCSI/Link", "" },
+};
+
+
+
+/*====================================================
+ definitions for SCSI commands
+====================================================*/
+
+/*
+ * command templates
+ */
+/* unknown commands */
+/* Vendor #1 */
+static const scsi_dayna_ether_generic sonic_ether_vendor1 = {
+ { DAYNA_CMD_VENDOR1, 0x00 },
+ 0x00,
+ { 0x00, 0x00 },
+ 0x80
+};
+
+
+
+#if 0
+/*
+ * Compare two Ether/802 addredses for equality, inlined and
+ * unrolled for speed.
+ * Note: use this like memcmp()
+ */
+static __inline uint16_t
+ether_cmp(void *one, void *two)
+{
+ uint16_t* a;
+ uint16_t* b;
+ uint16_t diff;
+
+ a = (uint16_t *) one;
+ b = (uint16_t *) two;
+
+ diff = (a[0] - b[0]) | (a[1] - b[1]) | (a[2] - b[2]);
+
+ return (diff);
+}
+
+#define ETHER_CMP ether_cmp
+#endif
+
+/*
+ * check to match with SCSI inquiry information
+ */
+static int
+dsematch(device_t parent, cfdata_t match, void *aux)
+{
+ struct scsipibus_attach_args *sa = aux;
+ int priority;
+
+ (void)scsipi_inqmatch(&sa->sa_inqbuf,
+ dse_patterns, sizeof(dse_patterns) / sizeof(dse_patterns[0]),
+ sizeof(dse_patterns[0]), &priority);
+ return priority;
+}
+
+
+/*
+ * The routine called by the low level scsi routine when it discovers
+ * a device suitable for this driver.
+ */
+static void
+dseattach(device_t parent, device_t self, void *aux)
+{
+ struct dse_softc *sc = device_private(self);
+ struct scsipibus_attach_args *sa = aux;
+ struct scsipi_periph *periph = sa->sa_periph;
+ struct ifnet *ifp = &sc->sc_ethercom.ec_if;
+ uint8_t myaddr[ETHER_ADDR_LEN];
+ char wqname[MAXCOMLEN];
+ int rv;
+
+ sc->sc_dev = self;
+
+ aprint_normal("\n");
+ SC_DEBUG(periph, SCSIPI_DB2, ("dseattach: "));
+
+ sc->sc_attach_state = 0;
+ callout_init(&sc->sc_recv_ch, CALLOUT_MPSAFE);
+ callout_setfunc(&sc->sc_recv_ch, dse_recv_callout, (void *)sc);
+ mutex_init(&sc->sc_iflock, MUTEX_DEFAULT, IPL_SOFTNET);
+
+ /*
+ * Store information needed to contact our base driver
+ */
+ sc->sc_periph = periph;
+ periph->periph_dev = sc->sc_dev;
+ periph->periph_switch = &dse_switch;
+#if 0
+ sc_periph->sc_link_dbflags = SCSIPI_DB1;
+#endif
+
+ dse_poll = mstohz(DSE_POLL);
+ dse_poll = dse_poll? dse_poll: 1;
+ dse_poll0 = mstohz(DSE_POLL0);
+ dse_poll0 = dse_poll0? dse_poll0: 1;
+
+ /*
+ * Initialize and attach send and receive buffers
+ */
+ sc->sc_tbuf = malloc(ETHERMTU + sizeof(struct ether_header) +
+ DSE_EXTRAS_TX + 16, M_DEVBUF, M_WAITOK);
+
+ sc->sc_rbuf = malloc(RBUF_LEN + 16, M_DEVBUF, M_WAITOK);
+
+ /* initialize adaptor and obtain MAC address */
+ dse_init_adaptor(sc);
+ sc->sc_attach_state = 1;
+
+ /* Initialize ifnet structure. */
+ strcpy(ifp->if_xname, device_xname(sc->sc_dev));
+ ifp->if_softc = sc;
+ ifp->if_start = dse_ifstart;
+ ifp->if_ioctl = dse_ioctl;
+ ifp->if_watchdog = dsewatchdog;
+ ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
+ ifp->if_extflags = IFEF_MPSAFE;
+
+ dse_get_addr(sc, myaddr);
+
+ /* Attach the interface. */
+ if_initialize(ifp);
+
+ snprintf(wqname, sizeof(wqname), "%sRx", device_xname(sc->sc_dev));
+ rv = workqueue_create(&sc->sc_recv_wq, wqname, dse_recv_worker, sc,
+ PRI_SOFTNET, IPL_NET, WQ_MPSAFE);
+ if (rv != 0) {
+ aprint_error_dev(sc->sc_dev,
+ "unable to create recv Rx workqueue\n");
+ dsedetach(sc->sc_dev, 0);
+ return; /* Error */
+ }
+ sc->sc_recv_work_pending = false;
+ sc->sc_attach_state = 2;
+
+ snprintf(wqname, sizeof(wqname), "%sTx", device_xname(sc->sc_dev));
+ rv = workqueue_create(&sc->sc_send_wq, wqname, dse_send_worker, ifp,
+ PRI_SOFTNET, IPL_NET, WQ_MPSAFE);
+ if (rv != 0) {
+ aprint_error_dev(sc->sc_dev,
+ "unable to create send Tx workqueue\n");
+ dsedetach(sc->sc_dev, 0);
+ return; /* Error */
+ }
+ sc->sc_send_work_pending = false;
+ sc->sc_ipq = if_percpuq_create(&sc->sc_ethercom.ec_if);
+ ether_ifattach(ifp, myaddr);
+ if_register(ifp);
+ sc->sc_attach_state = 4;
+
+ bpf_attach(ifp, DLT_EN10MB, sizeof(struct ether_header));
+}
+
+static int
+dsedetach(device_t self, int flags)
+{
+ struct dse_softc *sc = device_private(self);
+ struct ifnet *ifp = &sc->sc_ethercom.ec_if;
+
+ switch(sc->sc_attach_state) {
+ case 4:
+ dse_stop(sc);
+ mutex_enter(&sc->sc_iflock);
+ ifp->if_flags &= ~IFF_RUNNING;
+ dse_disable(sc);
+ ether_ifdetach(ifp);
+ if_detach(ifp);
+ mutex_exit(&sc->sc_iflock);
+ if_percpuq_destroy(sc->sc_ipq);
+ /*FALLTHROUGH*/
+ case 3:
+ workqueue_destroy(sc->sc_send_wq);
+ /*FALLTHROUGH*/
+ case 2:
+ workqueue_destroy(sc->sc_recv_wq);
+ /*FALLTHROUGH*/
+ case 1:
+ free(sc->sc_rbuf, M_DEVBUF);
+ free(sc->sc_tbuf, M_DEVBUF);
+ callout_destroy(&sc->sc_recv_ch);
+ mutex_destroy(&sc->sc_iflock);
+ break;
+ default:
+ aprint_error_dev(sc->sc_dev, "detach failed (state %d)\n",
+ sc->sc_attach_state);
+ return 1;
+ break;
+ }
+
+ return 0;
+}
+
+
+/*
+ * submit SCSI command
+ */
+static __inline int
+dse_scsipi_cmd(struct scsipi_periph *periph, struct scsipi_generic *cmd,
+ int cmdlen, u_char *data_addr, int datalen, int retries, int timeout,
+ struct buf *bp, int flags)
+{
+ int error = 0;
+
+ error = scsipi_command(periph, cmd, cmdlen, data_addr,
+ datalen, retries, timeout, bp, flags);
+
+ return error;
+}
+
+
+/*
+ * Start routine for calling from network sub system
+ */
+static void
+dse_ifstart(struct ifnet *ifp)
+{
+ struct dse_softc *sc = ifp->if_softc;
+
+ mutex_enter(&sc->sc_iflock);
+ if (!sc->sc_send_work_pending) {
+ sc->sc_send_work_pending = true;
+ workqueue_enqueue(sc->sc_send_wq, &sc->sc_send_work, NULL);
+ }
+ mutex_exit(&sc->sc_iflock);
+ if (sc->sc_flags & DSE_NEED_RECV) {
+ sc->sc_flags &= ~DSE_NEED_RECV;
+ }
+}
+
+/*
+ * Invoke the transmit workqueue and transmission on the interface.
+ */
+static void
+dse_send_worker(struct work *wk, void *cookie)
+{
+ struct ifnet *ifp = cookie;
+ struct dse_softc *sc = ifp->if_softc;
+ scsi_dayna_ether_generic cmd_send;
+ struct mbuf *m, *m0;
+ int len, error;
+ u_char *cp;
+
+ mutex_enter(&sc->sc_iflock);
+ sc->sc_send_work_pending = false;
+ mutex_exit(&sc->sc_iflock);
+
+ KASSERT(if_is_mpsafe(ifp));
+
+ /* Don't transmit if interface is busy or not running */
+ if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
+ return;
+
+ while (1) {
+ IFQ_DEQUEUE(&ifp->if_snd, m0);
+ if (m0 == NULL)
+ break;
+ /* If BPF is listening on this interface, let it see the
+ * packet before we commit it to the wire.
+ */
+ bpf_mtap(ifp, m0, BPF_D_OUT);
+
+ /* We need to use m->m_pkthdr.len, so require the header */
+ if ((m0->m_flags & M_PKTHDR) == 0)
+ panic("ctscstart: no header mbuf");
+ len = m0->m_pkthdr.len;
+
+ /* Mark the interface busy. */
+ ifp->if_flags |= IFF_OACTIVE;
+
+ /* Chain; copy into linear buffer allocated at attach time. */
+ cp = sc->sc_tbuf;
+ for (m = m0; m != NULL; ) {
+ memcpy(cp, mtod(m, u_char *), m->m_len);
+ cp += m->m_len;
+ m = m0 = m_free(m);
+ }
+ if (len < DSE_MINSIZE) {
+#ifdef SEDEBUG
+ if (sc->sc_debug)
+ aprnt_error_dev(sc->sc_dev,
+ "packet size %d (%zu) < %d\n", len,
+ cp - (u_char *)sc->sc_tbuf, SEMINSIZE);
+#endif
+ memset(cp, 0, DSE_MINSIZE - len);
+ len = DSE_MINSIZE;
+ }
+
+ /* Fill out SCSI command. */
+ memset(&cmd_send, 0, sizeof(cmd_send));
+ cmd_send.opcode[0] = DAYNA_CMD_SEND;
+ _lto2b(len, &(cmd_send.length[0]));
+ cmd_send.byte6 = 0x00;
+
+ /* Send command to device. */
+ error = dse_scsipi_cmd(sc->sc_periph,
+ (void *)&cmd_send, sizeof(cmd_send),
+ sc->sc_tbuf, len, DSE_RETRIES,
+ DSE_TIMEOUT, NULL, XS_CTL_NOSLEEP | XS_CTL_POLL |
+ XS_CTL_DATA_OUT);
+ if (error) {
+ aprint_error_dev(sc->sc_dev,
+ "not queued, error %d\n", error);
+ if_statinc(ifp, if_oerrors);
+ ifp->if_flags &= ~IFF_OACTIVE;
+ } else
+ if_statinc(ifp, if_opackets);
+ }
+}
+
+
+/*
+ * Called from the scsibus layer via our scsi device switch.
+ */
+static void
+dsedone(struct scsipi_xfer *xs, int error)
+{
+ struct dse_softc *sc = device_private(xs->xs_periph->periph_dev);
+ struct scsipi_generic *cmd = xs->cmd;
+ struct ifnet *ifp = &sc->sc_ethercom.ec_if;
+
+ if (IS_SEND(cmd)) {
+ ifp->if_flags &= ~IFF_OACTIVE;
+ } else if (IS_RECV(cmd)) {
+ /* RECV complete */
+ /* pass data up. reschedule a recv */
+ /* scsipi_free_xs will call start. Harmless. */
+
+ if (error) {
+ /* Reschedule after a delay */
+ callout_schedule(&sc->sc_recv_ch, dse_poll);
+ } else {
+ int n, ntimeo;
+ n = dse_read(sc, xs->data, xs->datalen - xs->resid);
+ if (n > dse_max_received)
+ dse_max_received = n;
+ if (n == 0)
+ ntimeo = dse_poll;
+ else if (n >= RDATA_MAX)
+ ntimeo = dse_poll0;
+ else {
+ ntimeo = sc->sc_last_timeout;
+ ntimeo = (ntimeo * RDATA_GOAL)/n;
+ ntimeo = (ntimeo < dse_poll0?
+ dse_poll0: ntimeo);
+ ntimeo = (ntimeo > dse_poll?
+ dse_poll: ntimeo);
+ }
+ sc->sc_last_timeout = ntimeo;
+ callout_schedule(&sc->sc_recv_ch, ntimeo);
+ }
+ }
+}
+
+
+/*
+ * Setup a receive command by queuing the work.
+ * Usually called from a callout, but also from se_init().
+ */
+static void
+dse_recv_callout(void *v)
+{
+ /* do a recv command */
+ struct dse_softc *sc = (struct dse_softc *) v;
+
+ if (sc->sc_enabled == 0)
+ return;
+
+ mutex_enter(&sc->sc_iflock);
+ if (sc->sc_recv_work_pending == true) {
+ callout_schedule(&sc->sc_recv_ch, dse_poll);
+ mutex_exit(&sc->sc_iflock);
+ return;
+ }
+
+ sc->sc_recv_work_pending = true;
+ workqueue_enqueue(sc->sc_recv_wq, &sc->sc_recv_work, NULL);
+ mutex_exit(&sc->sc_iflock);
+}
+
+/*
+ * Invoke the receive workqueue
+ */
+static void
+dse_recv_worker(struct work *wk, void *cookie)
+{
+ struct dse_softc *sc = (struct dse_softc *) cookie;
+
+ dse_recv(sc);
+ mutex_enter(&sc->sc_iflock);
+ sc->sc_recv_work_pending = false;
+ mutex_exit(&sc->sc_iflock);
+
+}
+
+/*
+ * Do the actual work of receiving data.
+ */
+static void
+dse_recv(struct dse_softc *sc)
+{
+ scsi_dayna_ether_generic cmd_recv;
+ int error, len;
+
+ /* do a recv command */
+ /* fill out command buffer */
+ memset(&cmd_recv, 0, sizeof(cmd_recv));
+ cmd_recv.opcode[0] = DAYNA_CMD_RECV;
+ len = MAX_BYTES_RX + DSE_EXTRAS_RX;
+ _lto2b(len, &(cmd_recv.length[0]));
+ cmd_recv.byte6 = 0xC0;
+
+ error = dse_scsipi_cmd(sc->sc_periph,
+ (void *)&cmd_recv, sizeof(cmd_recv),
+ sc->sc_rbuf, RBUF_LEN, DSE_RETRIES, DSE_TIMEOUT, NULL,
+ XS_CTL_NOSLEEP | XS_CTL_POLL | XS_CTL_DATA_IN);
+ if (error)
+ callout_schedule(&sc->sc_recv_ch, dse_poll);
+}
+
+
+/*
+ * We copy the data into mbufs. When full cluster sized units are present
+ * we copy into clusters.
+ */
+static struct mbuf *
+dse_get(struct dse_softc *sc, uint8_t *data, int totlen)
+{
+ struct ifnet *ifp = &sc->sc_ethercom.ec_if;
+ struct mbuf *m, *m0, *newm;
+ int len;
+
+ MGETHDR(m0, M_DONTWAIT, MT_DATA);
+ if (m0 == NULL)
+ return NULL;
+
+ m_set_rcvif(m0, ifp);
+ m0->m_pkthdr.len = totlen;
+ len = MHLEN;
+ m = m0;
+
+ while (totlen > 0) {
+ if (totlen >= MINCLSIZE) {
+ MCLGET(m, M_DONTWAIT);
+ if((m->m_flags & M_EXT) == 0)
+ goto bad;
+
+ len = MCLBYTES;
+ }
+
+ if (m == m0) {
+ char *newdata = (char *)
+ ALIGN(m->m_data + sizeof(struct ether_header)) -
+ sizeof(struct ether_header);
+ len -= newdata - m->m_data;
+ m->m_data = newdata;
+ }
+
+ m->m_len = len = uimin(totlen, len);
+ memcpy(mtod(m, void *), data, len);
+ data += len;
+
+ totlen -= len;
+ if (totlen > 0) {
+ MGET(newm, M_DONTWAIT, MT_DATA);
+ if (newm == NULL)
+ goto bad;
+
+ len = MLEN;
+ m = m->m_next = newm;
+ }
+ }
+
+ return m0;
+
+bad:
+ m_freem(m0);
+ return NULL ;
+}
+
+
+#ifdef MAC68K_DEBUG
+static int
+peek_packet(uint8_t* buf)
+{
+ struct ether_header *eh;
+ uint16_t type;
+ int len;
+
+ eh = (struct ether_header*)buf;
+ type = _2btol((uint8_t*)&(eh->ether_type));
+
+ len = sizeof(struct ether_header);
+
+ if (type <= ETHERMTU) {
+ /* for 802.3 */
+ len += type;
+ } else{
+ /* for Ethernet II (DIX) */
+ switch (type) {
+ case ETHERTYPE_ARP:
+ len += 28;
+ break;
+ case ETHERTYPE_IP:
+ len += _2btol(buf + sizeof(struct ether_header) + 2);
+ break;
+ default:
+ len = 0;
+ goto l_end;
+ break;
+ }
+ }
+ if (len < DSE_MINSIZE) {
+ len = DSE_MINSIZE;
+ }
+ len += ETHER_CRC_LEN;
+
+ l_end:;
+ return len;
+}
+#endif
+
+
+/*
+ * Pass packets to higher levels.
+ */
+static int
+dse_read(struct dse_softc *sc, uint8_t *data, int datalen)
+{
+ struct mbuf *m;
+ struct ifnet *ifp = &sc->sc_ethercom.ec_if;
+ int len;
+ int n;
+#ifdef MAC68K_DEBUG
+ int peek_flag = 1;
+#endif
+
+ mutex_enter(&sc->sc_iflock);
+ n = 0;
+ while (datalen >= DSE_HEADER_RX) {
+ /*
+ * fetch bytes of stream.
+ * here length = (ether frame length) + (FCS's 4 bytes)
+ */
+ /* fetch frame length */
+ len = _2btol(data);
+
+ /* skip header part */
+ data += DSE_HEADER_RX;
+ datalen -= DSE_HEADER_RX;
+
+#if 0 /* 03/10/2001 only for debug */
+ {
+ printf("DATALEN %d len %d\n", datalen, len);
+ int j;
+ printf("\ndump[%d]: ",n);
+ for ( j = 0 ; j < datalen ; j++ ) {
+ printf("%02X ",data[j-DSE_HEADER_RX]);
+ }
+ }
+#endif
+#ifdef MAC68K_DEBUG
+ if (peek_flag) {
+ peek_flag = 0;
+ len = peek_packet(data);
+ }
+#endif
+ if (len <=0)
+ break;
+
+#ifdef DSE_DEBUG
+ aprint_error_dev("dse_read: datalen = %d, packetlen = %d, "
+ "proto = 0x%04x\n", datalen, len,
+ ntohs(((struct ether_header *)data)->ether_type));
+#endif
+ if ((len < (DSE_MINSIZE + ETHER_CRC_LEN)) ||
+ (MAX_BYTES_RX < len)) {
+#ifdef DSE_DEBUG
+ aprint_error_dev(sc->sc_dev, "invalid packet size "
+ "%d; dropping\n", len);
+#endif
+ if_statinc(ifp, if_ierrors);
+printf("LEN %d\n",len);
+ break;
+ }
+
+ /* Don't need crc. Must keep ether header for BPF */
+ m = dse_get(sc, data, len - ETHER_CRC_LEN);
+ if (m == NULL) {
+#ifdef DSE_DEBUG
+ if (sc->sc_debug)
+ aprint_error_dev("dse_read: dse_get returned "
+ "null\n");
+#endif
+printf("M null\n");
+ if_statinc(ifp, if_ierrors);
+ goto next_packet;
+ }
+ if_statinc(ifp, if_ipackets);
+
+ /*
+ * Check if there's a BPF listener on this interface.
+ * If so, hand off the raw packet to BPF.
+ */
+ if (ifp->if_bpf)
+ bpf_mtap(ifp, m, BPF_D_OUT);
+
+ /* Pass the packet up. */
+ if_percpuq_enqueue(sc->sc_ipq, m);
+
+ next_packet:
+ data += len;
+ datalen -= len;
+ n++;
+ }
+ mutex_exit(&sc->sc_iflock);
+
+ return n;
+}
+
+
+static void
+dsewatchdog(struct ifnet *ifp)
+{
+ struct dse_softc *sc = ifp->if_softc;
+
+ log(LOG_ERR, "%s: device timeout\n", device_xname(sc->sc_dev));
+ if_statinc(ifp, if_oerrors);
+
+ dse_reset(sc);
+}
+
+
+static int
+dse_reset(struct dse_softc *sc)
+{
+ int error;
+#if 0
+ /* Maybe we don't *really* want to reset the entire bus
+ * because the ctron isn't working. We would like to send a
+ * "BUS DEVICE RESET" message, but don't think the ctron
+ * understands it.
+ */
+ error = dse_scsipi_cmd(sc->sc_periph, 0, 0, 0, 0, DSE_RETRIES, 2000,
+ NULL, XS_CTL_RESET);
+#endif
+ error = dse_init(sc);
+ return error;
+}
+
+
+static int
+dse_init_adaptor(struct dse_softc *sc)
+{
+ scsi_dayna_ether_generic cmd_vend1;
+ u_char tmpbuf[sizeof(cmd_vend1)];
+ int error;
+
+#if 0 /* 07/21/2001 for test */
+ /* Maybe we don't *really* want to reset the entire bus
+ * because the ctron isn't working. We would like to send a
+ * "BUS DEVICE RESET" message, but don't think the ctron
+ * understands it.
+ */
+ error = dse_scsipi_cmd(sc->sc_periph, 0, 0, 0, 0, DSE_RETRIES,
+ 2000, NULL, XS_CTL_RESET);
+#endif
+
+ cmd_vend1 = sonic_ether_vendor1;
+
+ error = dse_scsipi_cmd(sc->sc_periph,
+ (struct scsipi_generic *)&cmd_vend1, sizeof(cmd_vend1),
+ &(tmpbuf[0]), sizeof(tmpbuf),
+ DSE_RETRIES, DSE_TIMEOUT, NULL, XS_CTL_POLL | XS_CTL_DATA_IN);
+
+ if (error)
+ goto l_end;
+
+ /* wait 500 msec */
+ kpause("dsesleep", false, hz / 2, NULL);
+
+l_end:
+ return error;
+}
+
+
+static int
+dse_get_addr(struct dse_softc *sc, uint8_t *myaddr)
+{
+ scsi_dayna_ether_generic cmd_get_addr;
+ u_char tmpbuf[REQ_LEN_GET_ADDR];
+ int error;
+
+ memset(&cmd_get_addr, 0, sizeof(cmd_get_addr));
+ cmd_get_addr.opcode[0] = DAYNA_CMD_GET_ADDR;
+ _lto2b(REQ_LEN_GET_ADDR, cmd_get_addr.length);
+
+ error = dse_scsipi_cmd(sc->sc_periph,
+ (struct scsipi_generic *)&cmd_get_addr, sizeof(cmd_get_addr),
+ tmpbuf, sizeof(tmpbuf),
+ DSE_RETRIES, DSE_TIMEOUT, NULL, XS_CTL_POLL | XS_CTL_DATA_IN);
+
+ if (error == 0) {
+ memcpy(myaddr, &(tmpbuf[0]), ETHER_ADDR_LEN);
+
+ aprint_error_dev(sc->sc_dev, "ethernet address %s\n",
+ ether_sprintf(myaddr));
+ }
+
+ return error;
+}
+
+
+#if 0 /* 07/16/2000 comment-out */
+static int
+dse_set_mode(struct dse_softc *sc, int len, int mode)
+
+ return 0;
+}
+#endif
+
+
+static int
+dse_init(struct dse_softc *sc)
+{
+ struct ifnet *ifp = &sc->sc_ethercom.ec_if;
+ int error = 0;
+
+ if ((ifp->if_flags & (IFF_RUNNING | IFF_UP)) == IFF_UP) {
+ ifp->if_flags |= IFF_RUNNING;
+ mutex_enter(&sc->sc_iflock);
+ if (!sc->sc_recv_work_pending) {
+ sc->sc_recv_work_pending = true;
+ workqueue_enqueue(sc->sc_recv_wq, &sc->sc_recv_work,
+ NULL);
+ }
+ mutex_exit(&sc->sc_iflock);
+ ifp->if_flags &= ~IFF_OACTIVE;
+ mutex_enter(&sc->sc_iflock);
+ if (!sc->sc_send_work_pending) {
+ sc->sc_send_work_pending = true;
+ workqueue_enqueue(sc->sc_send_wq, &sc->sc_send_work,
+ NULL);
+ }
+ mutex_exit(&sc->sc_iflock);
+ }
+ return error;
+}
+
+
+static uint8_t BROADCAST_ADDR[ETHER_ADDR_LEN] =
+ { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+
+
+static int
+dse_set_multi(struct dse_softc *sc)
+{
+ scsi_dayna_ether_generic cmd_set_multi;
+ struct ether_multistep step;
+ struct ether_multi *enm;
+ u_char *cp, *mybuf;
+ int error, len;
+
+ error = 0;
+
+#ifdef DSE_DEBUG
+ aprint_error_dev(sc->sc_dev, "dse_set_multi\n");
+#endif
+
+ mybuf = malloc(ETHER_ADDR_LEN * DSE_MCAST_MAX, M_DEVBUF, M_NOWAIT);
+ if (mybuf == NULL) {
+ error = EIO;
+ goto l_end;
+ }
+
+ /*
+ * copy all entries to transfer buffer
+ */
+ cp = mybuf;
+ len = 0;
+ ETHER_FIRST_MULTI(step, &(sc->sc_ethercom), enm);
+ while ((len < (DSE_MCAST_MAX - 1)) && (enm != NULL)) {
+ /* ### refer low side entry */
+ memcpy(cp, enm->enm_addrlo, ETHER_ADDR_LEN);
+
+ cp += ETHER_ADDR_LEN;
+ len++;
+ ETHER_NEXT_MULTI(step, enm);
+ }
+
+ /* add broadcast address as default */
+ memcpy(cp, BROADCAST_ADDR, ETHER_ADDR_LEN);
+ len++;
+
+ len *= ETHER_ADDR_LEN;
+
+ memset(&cmd_set_multi, 0, sizeof(cmd_set_multi));
+ cmd_set_multi.opcode[0] = DAYNA_CMD_SET_MULTI;
+ _lto2b(len, cmd_set_multi.length);
+
+ error = dse_scsipi_cmd(sc->sc_periph,
+ (struct scsipi_generic*)&cmd_set_multi, sizeof(cmd_set_multi),
+ mybuf, len, DSE_RETRIES, DSE_TIMEOUT, NULL, XS_CTL_POLL | XS_CTL_DATA_OUT);
+
+ free(mybuf, M_DEVBUF);
+
+l_end:
+ return error;
+}
+
+
+static void
+dse_stop(struct dse_softc *sc)
+{
+ /* Don't schedule any reads */
+ callout_stop(&sc->sc_recv_ch);
+
+ /* Wait for the workqueues to finish */
+ mutex_enter(&sc->sc_iflock);
+ workqueue_wait(sc->sc_recv_wq, &sc->sc_recv_work);
+ workqueue_wait(sc->sc_send_wq, &sc->sc_send_work);
+ mutex_exit(&sc->sc_iflock);
+
+ /* Abort any scsi cmds in progress */
+ mutex_enter(chan_mtx(sc->sc_periph->periph_channel));
+ scsipi_kill_pending(sc->sc_periph);
+ mutex_exit(chan_mtx(sc->sc_periph->periph_channel));
+}
+
+
+/*
+ * Process an ioctl request.
+ */
+static int
+dse_ioctl(struct ifnet *ifp, u_long cmd, void *data)
+{
+ struct dse_softc *sc;
+ struct ifaddr *ifa;
+ struct ifreq *ifr;
+ struct sockaddr *sa;
+ int error;
+
+ error = 0;
+ sc = ifp->if_softc;
+ ifa = (struct ifaddr *)data;
+ ifr = (struct ifreq *)data;
+
+ switch (cmd) {
+ case SIOCINITIFADDR:
+ mutex_enter(&sc->sc_iflock);
+ if ((error = dse_enable(sc)) != 0)
+ break;
+ ifp->if_flags |= IFF_UP;
+ mutex_exit(&sc->sc_iflock);
+
+#if 0
+ if ((error = dse_set_media(sc, CMEDIA_AUTOSENSE)) != 0)
+ break;
+#endif
+
+ switch (ifa->ifa_addr->sa_family) {
+#ifdef INET
+ case AF_INET:
+ // sc->protos |= (PROTO_IP | PROTO_ARP | PROTO_REVARP);
+ if ((error = dse_init(sc)) != 0)
+ break;
+ arp_ifinit(ifp, ifa);
+ break;
+#endif
+#ifdef NETATALK
+ case AF_APPLETALK:
+ // sc->protos |= (PROTO_AT | PROTO_AARP);
+ if ((error = dse_init(sc)) != 0)
+ break;
+ break;
+#endif
+ default:
+ error = dse_init(sc);
+ break;
+ }
+ break;
+
+
+ case SIOCSIFADDR:
+ mutex_enter(&sc->sc_iflock);
+ error = dse_enable(sc);
+ mutex_exit(&sc->sc_iflock);
+ if (error != 0)
+ break;
+ ifp->if_flags |= IFF_UP;
+
+ switch (ifa->ifa_addr->sa_family) {
+#ifdef INET
+ case AF_INET:
+ if ((error = dse_init(sc)) != 0)
+ break;
+ arp_ifinit(ifp, ifa);
+ break;
+#endif
+#ifdef NETATALK
+ case AF_APPLETALK:
+ if ((error = dse_init(sc)) != 0)
+ break;
+ break;
+#endif
+ default:
+ error = dse_init(sc);
+ break;
+ }
+ break;
+
+ case SIOCSIFFLAGS:
+ if ((error = ifioctl_common(ifp, cmd, data)) != 0)
+ break;
+ /* XXX re-use ether_ioctl() */
+ switch (ifp->if_flags & (IFF_UP | IFF_RUNNING)) {
+ case IFF_RUNNING:
+ /*
+ * If interface is marked down and it is running, then
+ * stop it.
+ */
+ dse_stop(sc);
+ mutex_enter(&sc->sc_iflock);
+ ifp->if_flags &= ~IFF_RUNNING;
+ dse_disable(sc);
+ mutex_exit(&sc->sc_iflock);
+ break;
+ case IFF_UP:
+ /*
+ * If interface is marked up and it is stopped, then
+ * start it.
+ */
+ mutex_enter(&sc->sc_iflock);
+ error = dse_enable(sc);
+ mutex_exit(&sc->sc_iflock);
+ if (error)
+ break;
+ error = dse_init(sc);
+ break;
+ default:
+ /*
+ * Reset the interface to pick up changes in any other
+ * flags that affect hardware registers.
+ */
+ mutex_enter(&sc->sc_iflock);
+ if (sc->sc_enabled)
+ error = dse_init(sc);
+ mutex_exit(&sc->sc_iflock);
+ break;
+ }
+#ifdef SEDEBUG
+ if (ifp->if_flags & IFF_DEBUG)
+ sc->sc_debug = 1;
+ else
+ sc->sc_debug = 0;
+#endif
+ break;
+
+ case SIOCADDMULTI:
+ if (sc->sc_enabled == 0) {
+ error = EIO;
+ break;
+ }
+ mutex_enter(&sc->sc_iflock);
+ sa = sockaddr_dup(ifreq_getaddr(cmd, ifr), M_WAITOK);
+ mutex_exit(&sc->sc_iflock);
+ if (ether_addmulti(sa, &sc->sc_ethercom) == ENETRESET) {
+ error = dse_set_multi(sc);
+#ifdef DSE_DEBUG
+ aprint_error_dev(sc->sc_dev, "add multi: %s\n",
+ ether_sprintf(ifr->ifr_addr.sa_data));
+#endif
+ } else
+ error = 0;
+
+ mutex_enter(&sc->sc_iflock);
+ sockaddr_free(sa);
+ mutex_exit(&sc->sc_iflock);
+
+ break;
+
+ case SIOCDELMULTI:
+ if (sc->sc_enabled == 0) {
+ error = EIO;
+ break;
+ }
+ mutex_enter(&sc->sc_iflock);
+ sa = sockaddr_dup(ifreq_getaddr(cmd, ifr), M_WAITOK);
+ mutex_exit(&sc->sc_iflock);
+ if (ether_delmulti(sa, &sc->sc_ethercom) == ENETRESET) {
+ error = dse_set_multi(sc);
+#ifdef DSE_DEBUG
+ aprint_error_dev(sc->sc_dev, "delete multi: %s\n",
+ ether_sprintf(ifr->ifr_addr.sa_data));
+#endif
+ } else
+ error = 0;
+
+ mutex_enter(&sc->sc_iflock);
+ sockaddr_free(sa);
+ mutex_exit(&sc->sc_iflock);
+
+ break;
+
+ default:
+ error = ether_ioctl(ifp, cmd, data);
+ break;
+ }
+
+
+ return error;
+}
+
+
+/*
+ * Enable the network interface.
+ */
+int
+dse_enable(struct dse_softc *sc)
+{
+ struct scsipi_periph *periph = sc->sc_periph;
+ struct scsipi_adapter *adapt = periph->periph_channel->chan_adapter;
+ int error = 0;
+
+ if (sc->sc_enabled == 0) {
+ if ((error = scsipi_adapter_addref(adapt)) == 0)
+ sc->sc_enabled = 1;
+ else
+ aprint_error_dev(sc->sc_dev, "device enable failed\n");
+ }
+
+ return error;
+}
+
+
+/*
+ * Disable the network interface.
+ */
+void
+dse_disable(struct dse_softc *sc)
+{
+ struct scsipi_periph *periph = sc->sc_periph;
+ struct scsipi_adapter *adapt = periph->periph_channel->chan_adapter;
+ if (sc->sc_enabled != 0) {
+ scsipi_adapter_delref(adapt);
+ sc->sc_enabled = 0;
+ }
+}
+
+
+#define DSEUNIT(z) (minor(z))
+
+/*
+ * open the device.
+ */
+int
+dseopen(dev_t dev, int flag, int fmt, struct lwp *l)
+{
+ int unit, error;
+ struct dse_softc *sc;
+ struct scsipi_periph *periph;
+ struct scsipi_adapter *adapt;
+
+ unit = DSEUNIT(dev);
+ sc = device_lookup_private(&dse_cd, unit);
+ if (sc == NULL)
+ return ENXIO;
+
+ periph = sc->sc_periph;
+ adapt = periph->periph_channel->chan_adapter;
+
+ if ((error = scsipi_adapter_addref(adapt)) != 0)
+ return error;
+
+ SC_DEBUG(periph, SCSIPI_DB1,
+ ("scopen: dev=0x%"PRIx64" (unit %d (of %d))\n", dev, unit,
+ dse_cd.cd_ndevs));
+
+ periph->periph_flags |= PERIPH_OPEN;
+
+ SC_DEBUG(periph, SCSIPI_DB3, ("open complete\n"));
+
+ return 0;
+}
+
+
+/*
+ * close the device.. only called if we are the LAST
+ * occurence of an open device
+ */
+int
+dseclose(dev_t dev, int flag, int fmt, struct lwp *l)
+{
+ struct dse_softc *sc = device_lookup_private(&dse_cd, DSEUNIT(dev));
+ struct scsipi_periph *periph = sc->sc_periph;
+ struct scsipi_adapter *adapt = periph->periph_channel->chan_adapter;
+
+ SC_DEBUG(sc->sc_periph, SCSIPI_DB1, ("closing\n"));
+
+ scsipi_wait_drain(periph);
+
+ scsipi_adapter_delref(adapt);
+ periph->periph_flags &= ~PERIPH_OPEN;
+
+ return 0;
+}
+
+
+/*
+ * Perform special action on behalf of the user
+ * Only does generic scsi ioctls.
+ */
+int
+dseioctl(dev_t dev, u_long cmd, void *addr, int flag, struct lwp *l)
+{
+ struct dse_softc *sc = device_lookup_private(&dse_cd, DSEUNIT(dev));
+
+ return (scsipi_do_ioctl(sc->sc_periph, dev, cmd, addr, flag, l));
+}
+
