Module Name:    src
Committed By:   msaitoh
Date:           Wed Oct 20 08:06:45 UTC 2021

Modified Files:
        src/sys/dev/pci: if_wm.c

Log Message:
Disable printf()s in wm_flush_desc_rings() because the code is verified.

 The problem was very rare, so I added those printf()s as we can see.
Last week, knakahara and I found a procedure to reproduce the problem and
verified it worked correctly.

 To reproduce the problem:

 0) Use I219 V1 to V5. Not all of them have the problem and newer than V5 may
    have the problem. I used V2 for the test.
 1) Define WM_DEBUG or add printf in wm_flush_desc_rings() to see
    DESCRING_STATUS_FLUSH_REQ bit.
 2) Run "iperf -s" on the DUT.
 3) Run "iperf3 -R -u -c 192.168.1.110 -w 8m -b 1g" repeatedly on another
    machine. Note that kern.sbmax should be increased on both machines.
 4) run
        while true; do
        ifconfig wm0 down up
        sleep 30
        done
 5) After DESCRING_STATUS_FLUSH_REQ is set, without wm_flush_desc_rings(),
    TX stalls and reboot is required to recover from it.
    With wm_flush_desc_rings(), no device hang.
 6) If you can't see the DESCRING_STATUS_FLUSH_REQ is set, change the media
    to 100BASE-T.

 Note that if_wm.c rev. 1.710 originally written by chuq is required for the
test. Without the change, the device becomes unrecoverable state before
wm_flush_desc_rings() and the function doesn't recover from the problem.


To generate a diff of this commit:
cvs rdiff -u -r1.713 -r1.714 src/sys/dev/pci/if_wm.c

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Modified files:

Index: src/sys/dev/pci/if_wm.c
diff -u src/sys/dev/pci/if_wm.c:1.713 src/sys/dev/pci/if_wm.c:1.714
--- src/sys/dev/pci/if_wm.c:1.713	Wed Oct 20 08:02:07 2021
+++ src/sys/dev/pci/if_wm.c	Wed Oct 20 08:06:45 2021
@@ -1,4 +1,4 @@
-/*	$NetBSD: if_wm.c,v 1.713 2021/10/20 08:02:07 msaitoh Exp $	*/
+/*	$NetBSD: if_wm.c,v 1.714 2021/10/20 08:06:45 msaitoh Exp $	*/
 
 /*
  * Copyright (c) 2001, 2002, 2003, 2004 Wasabi Systems, Inc.
@@ -82,7 +82,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_wm.c,v 1.713 2021/10/20 08:02:07 msaitoh Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_wm.c,v 1.714 2021/10/20 08:06:45 msaitoh Exp $");
 
 #ifdef _KERNEL_OPT
 #include "opt_net_mpsafe.h"
@@ -4890,8 +4890,9 @@ wm_flush_desc_rings(struct wm_softc *sc)
 	 * the data of the next descriptor. We don't care about the data we are
 	 * about to reset the HW.
 	 */
-	device_printf(sc->sc_dev, "Need TX flush (reg = %08x, len = %u)\n",
-	    preg, reg);
+#ifdef WM_DEBUG
+	device_printf(sc->sc_dev, "Need TX flush (reg = %08x)\n", preg);
+#endif
 	reg = CSR_READ(sc, WMREG_TCTL);
 	CSR_WRITE(sc, WMREG_TCTL, reg | TCTL_EN);
 
@@ -4921,7 +4922,9 @@ wm_flush_desc_rings(struct wm_softc *sc)
 	 * Mark all descriptors in the RX ring as consumed and disable the
 	 * rx ring.
 	 */
+#ifdef WM_DEBUG
 	device_printf(sc->sc_dev, "Need RX flush (reg = %08x)\n", preg);
+#endif
 	rctl = CSR_READ(sc, WMREG_RCTL);
 	CSR_WRITE(sc, WMREG_RCTL, rctl & ~RCTL_EN);
 	CSR_WRITE_FLUSH(sc);

Reply via email to