Module Name: src
Committed By: jmcneill
Date: Wed Nov 27 23:03:24 UTC 2019
Modified Files:
src/sys/arch/arm/ti: ti_sdhc.c
Log Message:
Fix inverted ti,needs-special-hs-handling property logic and enable EDMA support
To generate a diff of this commit:
cvs rdiff -u -r1.3 -r1.4 src/sys/arch/arm/ti/ti_sdhc.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: src/sys/arch/arm/ti/ti_sdhc.c
diff -u src/sys/arch/arm/ti/ti_sdhc.c:1.3 src/sys/arch/arm/ti/ti_sdhc.c:1.4
--- src/sys/arch/arm/ti/ti_sdhc.c:1.3 Tue Oct 29 22:19:13 2019
+++ src/sys/arch/arm/ti/ti_sdhc.c Wed Nov 27 23:03:24 2019
@@ -1,4 +1,4 @@
-/* $NetBSD: ti_sdhc.c,v 1.3 2019/10/29 22:19:13 jmcneill Exp $ */
+/* $NetBSD: ti_sdhc.c,v 1.4 2019/11/27 23:03:24 jmcneill Exp $ */
/*-
* Copyright (c) 2011 The NetBSD Foundation, Inc.
* All rights reserved.
@@ -29,7 +29,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: ti_sdhc.c,v 1.3 2019/10/29 22:19:13 jmcneill Exp $");
+__KERNEL_RCSID(0, "$NetBSD: ti_sdhc.c,v 1.4 2019/11/27 23:03:24 jmcneill Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -180,7 +180,6 @@ ti_sdhc_attach(device_t parent, device_t
sc->sc_addr = addr;
sc->sc_bst = faa->faa_bst;
-#if notyet
/* XXX use fdtbus_dma API */
int len;
const u_int *dmas = fdtbus_get_prop(phandle, "dmas", &len);
@@ -198,10 +197,6 @@ ti_sdhc_attach(device_t parent, device_t
sc->sc_edma_chan[EDMA_CHAN_RX] = -1;
break;
}
-#else
- sc->sc_edma_chan[EDMA_CHAN_TX] = -1;
- sc->sc_edma_chan[EDMA_CHAN_RX] = -1;
-#endif
if (bus_space_map(sc->sc_bst, addr, size, 0, &sc->sc_bsh) != 0) {
aprint_error(": couldn't map registers\n");
@@ -219,7 +214,7 @@ ti_sdhc_attach(device_t parent, device_t
sc->sc.sc_flags |= SDHC_FLAG_8BIT_MODE;
if (of_hasprop(phandle, "ti,needs-special-reset"))
sc->sc.sc_flags |= SDHC_FLAG_WAIT_RESET;
- if (of_hasprop(phandle, "ti,needs-special-hs-handling"))
+ if (!of_hasprop(phandle, "ti,needs-special-hs-handling"))
sc->sc.sc_flags |= SDHC_FLAG_NO_HS_BIT;
if (of_hasprop(phandle, "ti,dual-volt"))
sc->sc.sc_caps = SDHC_VOLTAGE_SUPP_3_0V;
