Hi, Running smartctl -t show was unsuccessful:
root@helium:~ # smartctl -t short /dev/ada1 smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.2-STABLE amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Self-test functions not supported Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Command "Execute SMART Short self-test routine immediately in off-line mode" failed: Input/output error The output of smartctl -a /dev/ada1 is attached. -- regards, Maciej Suszko.
smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.2-STABLE amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SSD 64G
Serial Number: 984120600086
Firmware Version: SVN484b
User Capacity: 64,023,257,088 bytes [64.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jan 5 21:32:03 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x0b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
No Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline
- 0
3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always
- 0
5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always
- 0
7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always
- 0
8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline
- 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always
- 1
10 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always
- 7
167 Unknown_Attribute 0x0022 100 100 000 Old_age Always
- 0
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always
- 2
169 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always
- 1572864
170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always
- 0
173 Unknown_Attribute 0x0012 198 198 000 Old_age Always
- 2490371
175 Program_Fail_Count_Chip 0x0013 100 100 010 Pre-fail Always
- 0
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0023 100 100 030 Pre-fail Always
- 40 (Min/Max 30/60)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
240 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always
- 0
SMART Error Log not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
pgpEVWqSxK6qF.pgp
Description: OpenPGP digital signature
------------------------------------------------------------------------------
_______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
