Hi,
as I am new here and not at all familiar with editing those webpages but still
wanted to contribute to the list of supported USB devices with
ID 1058:071a Western Digital Technologies, Inc. My Passport 1TB
I thought I might send it to you for review and entering into the list.
The device is acutally a 500GB external drive. If 1TB is just wrong or if
there are variants with 1TB and 500GB both with the same ID I don't know.
With the -d sat option the device is supported.
For details see the attatchment
Best regards
https://www.smartmontools.org/wiki/Supported_USB-Devices
Description:
WD My Passport
WDBAAA
USB-Brigde:
initio USB to SATA with AES encryption
according to
http://www.mikrocontroller.net/topic/225191
"Das Problem ist der Chip von initio - das ist zwar eine
USB-zu-SATA-Bridge, aber eine mit AES-Verschlüsselung."
idVendor:idProduct (bcdDevice):
0x1058:0x071a
Manufacturer / Product:
Western Digital / External HDD / 500GB
Option(s):
-d sat
Tested on
Linux
Author / Reference:
Stefan
Comment:
Kubuntu 14.04
Needs sufficient current over USB to run, my guess is > 500mA
********************************************************************************
Further details:
Western Digital My Passport 500GB
P/N: WDBAAA5000ABK-00
S/N: WX51A80J9865ST
Drive needs sufficient current over USB to run!
My guess is > 500mA but I cannot measure.
1A from separate 230V to USB adapter sure is sufficient as I tested OK.
Works on one of my USB 3.0 Ports, but not on another.
lsusb, details below, shows it as:
Bus 003 Device 008: ID 1058:071a Western Digital Technologies, Inc. My Passport
1TB
which is almost correct, except that it is not 1TB, but for sure 500GB.
To be more precise:
gparted shows
Modell: WD My Passport 071A
Size: 465.74 GiB
Path: /dev/sdd
Partitionstabelle (Partition table): gpt
Köpfe (Heads): 255
Sektoren/Spuren (Sectors): 63
Zylinder (Cylinders): 60797
Sektoren insgesamt (Sectors total): 976717824
Sektorgröße (Sector size): 512
stefan@aruba:~$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
(M-BT58)
Bus 003 Device 003: ID 04f2:0402 Chicony Electronics Co., Ltd Genius LuxeMate
i200 Keyboard
Bus 003 Device 005: ID 8087:07da Intel Corp.
Bus 003 Device 008: ID 1058:071a Western Digital Technologies, Inc. My Passport
1TB
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
stefan@aruba:~$ aptinstall smartmontools
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden zusätzlichen Pakete werden installiert:
heirloom-mailx
Vorgeschlagene Pakete:
exim4 mail-transport-agent gsmartcontrol smart-notifier
Empfohlene Pakete:
mailx mailutils
Die folgenden NEUEN Pakete werden installiert:
heirloom-mailx smartmontools
0 aktualisiert, 2 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 664 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 2.168 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen: 1 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/universe
heirloom-mailx amd64 12.5-2+deb7u1build0.14.04.1 [219 kB]
Holen: 2 http://de.archive.ubuntu.com/ubuntu/ trusty/main smartmontools amd64
6.2+svn3841-1.2 [445 kB]
Es wurden 664 kB in 2 s geholt (225 kB/s).
Vormals nicht ausgewähltes Paket heirloom-mailx wird gewählt.
(Lese Datenbank ... 208021 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von
.../heirloom-mailx_12.5-2+deb7u1build0.14.04.1_amd64.deb ...
Entpacken von heirloom-mailx (12.5-2+deb7u1build0.14.04.1) ...
Vormals nicht ausgewähltes Paket smartmontools wird gewählt.
Vorbereitung zum Entpacken von .../smartmontools_6.2+svn3841-1.2_amd64.deb ...
Entpacken von smartmontools (6.2+svn3841-1.2) ...
Trigger für man-db (2.6.7.1-1ubuntu1) werden verarbeitet ...
Trigger für ureadahead (0.100.0-16) werden verarbeitet ...
ureadahead will be reprofiled on next reboot
heirloom-mailx (12.5-2+deb7u1build0.14.04.1) wird eingerichtet ...
update-alternatives: /usr/bin/heirloom-mailx wird verwendet, um /usr/bin/mailx
(mailx) im Auto-Modus bereitzustellen
smartmontools (6.2+svn3841-1.2) wird eingerichtet ...
Trigger für ureadahead (0.100.0-16) werden verarbeitet ...
stefan@aruba:~$ sudo update-smart-drivedb
/var/lib/smartmontools/drivedb/drivedb.h updated from
branches/RELEASE_6_2_DRIVEDB
stefan@aruba:~$ sudo smartctl -a /dev/sdd
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-65-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdd: Unknown USB bridge [0x1058:0x071a (0x2011)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
stefan@aruba:~$ man smartctl
stefan@aruba:~$ man smartctl
stefan@aruba:~$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
(M-BT58)
Bus 003 Device 003: ID 04f2:0402 Chicony Electronics Co., Ltd Genius LuxeMate
i200 Keyboard
Bus 003 Device 005: ID 8087:07da Intel Corp.
Bus 003 Device 008: ID 1058:071a Western Digital Technologies, Inc. My Passport
1TB
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
stefan@aruba:~$ ^C
stefan@aruba:~$ sudo smartctl -d sat -a /dev/sdd
[sudo] password for stefan:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-65-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Elements / My Passport (USB)
Device Model: WDC WD5000BMVV-11GNWS0
Serial Number: WD-WX51A80J9865
LU WWN Device Id: 5 0014ee 2af9360cd
Firmware Version: 01.01A01
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Oct 10 11:38:18 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0027 157 150 021 Pre-fail Always
- 3108
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always
- 6017
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 088 088 000 Old_age Always
- 8848
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always
- 1016
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 243
193 Load_Cycle_Count 0x0032 193 193 000 Old_age Always
- 21376
194 Temperature_Celsius 0x0022 116 098 000 Old_age Always
- 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
stefan@aruba:~$
stefan@aruba:~$ sudo smartctl -d sat -H /dev/sdd
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-65-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
stefan@aruba:~$ sudo smartctl -d sat -t long /dev/sdd
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-65-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in
off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line
mode" successful.
Testing has begun.
Please wait 163 minutes for test to complete.
Test will complete after Sat Oct 10 14:36:06 2015
Use smartctl -X to abort test.
stefan@aruba:~$ sudo smartctl -X -d sat /dev/sdd
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-65-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Abort SMART off-line mode self-test routine".
Self-testing aborted!
stefan@aruba:~$
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
