The device model INTEL SSDSC2BX200G4 known as Intel SSD DC
S3610 Series, is missing in the smartdb.
Attached you find the
* smartctl output
Here is the model number from hdparm:
Model Number: INTEL SSDSC2BX200G4
Serial Number: BTHC505304N8200TGN
Firmware Revision: G2010110
device size with M = 1000*1000: 200049 MBytes (200 GB)
I am also adding a link to the specification of the SMART attributes:
*http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ssd-dc-s3610-spec.pdf
All the best, Georg
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-49-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSC2BX200G4
Serial Number: BTHC505304N8200TGN
LU WWN Device Id: 5 5cd2e4 04b78129e
Firmware Version: G2010110
User Capacity: 200,049,647,616 bytes [200 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Aug 18 11:16:00 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 324
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 17
170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always
- 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 16
175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always
- 4298120134
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 071 071 000 Old_age Always
- 29 (Min/Max 24/29)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 16
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 29
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always
- 0
225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always
- 151309
226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always
- 163
227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always
- 49
228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always
- 19417
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always
- 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always
- 0
234 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always
- 151309
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always
- 148963
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
