The device model INTEL SSDSC2BB080G6, known as Intel SSD DC
S3510 Series, is missing in the smartdb.
Attached you find the
* smartctl -a output
Here is the model number from hdparm:
Model Number: INTEL SSDSC2BB080G6
Serial Number: BTWA5175089N080BGN
Firmware Revision: G2010130
device size with M = 1000*1000: 80026 MBytes (80 GB)
I am also adding a link to the specification of the SMART attributes:
*http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ssd-dc-s3510-spec.pdf
All the best, Georg
# smartctl -x /dev/sdb
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-49-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSC2BB080G6
Serial Number: BTWA5175089N080BGN
LU WWN Device Id: 5 5cd2e4 04c0012b0
Firmware Version: G2010130
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jul 27 15:23:58 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2
170 Unknown_Attribute PO--CK 100 100 010 - 0
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
174 Unknown_Attribute -O--CK 100 100 000 - 1
175 Program_Fail_Count_Chip PO--CK 100 100 010 - 4296219010
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 090 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 070 070 000 - 30 (Min/Max 26/30)
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
194 Temperature_Celsius -O---K 100 100 000 - 30
197 Current_Pending_Sector -O--C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
225 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
226 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535
227 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535
228 Power-off_Retract_Count -O--CK 100 100 000 - 65535
232 Available_Reservd_Space PO--CK 100 100 010 - 0
233 Media_Wearout_Indicator -O--CK 100 100 000 - 0
234 Unknown_Attribute -O--CK 100 100 000 - 0
241 Total_LBAs_Written -O--CK 100 100 000 - 0
242 Total_LBAs_Read -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 8 Comprehensive SMART error log
0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb0 GPL,SL VS 1 Device vendor specific log
0xb1 GPL,SL VS 33 Device vendor specific log
0xb8 GPL,SL VS 1 Device vendor specific log
0xb9 GPL VS 1544 Device vendor specific log
0xb9 SL VS 8 Device vendor specific log
0xba GPL VS 1280 Device vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (20 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 26/30 Celsius
Lifetime Min/Max Temperature: 26/30 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 478 (19)
Index Estimated Time Temperature Celsius
20 2015-07-27 07:26 ? -
... ..(456 skipped). .. -
477 2015-07-27 15:03 ? -
0 2015-07-27 15:04 27 ********
1 2015-07-27 15:05 ? -
2 2015-07-27 15:06 28 *********
3 2015-07-27 15:07 29 **********
4 2015-07-27 15:08 29 **********
5 2015-07-27 15:09 29 **********
6 2015-07-27 15:10 30 ***********
... ..( 12 skipped). .. ***********
19 2015-07-27 15:23 30 ***********
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 2 Lifetime Power-On Resets
1 0x018 6 0 Logical Sectors Written
1 0x020 6 1571923 Number of Write Commands
1 0x028 6 752 Logical Sectors Read
1 0x030 6 1545683 Number of Read Commands
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 0 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 30 Current Temperature
5 0x010 1 - Average Short Term Temperature
5 0x018 1 - Average Long Term Temperature
5 0x020 1 30 Highest Temperature
5 0x028 1 30 Lowest Temperature
5 0x030 1 - Highest Average Short Term Temperature
5 0x038 1 - Lowest Average Short Term Temperature
5 0x040 1 - Highest Average Long Term Temperature
5 0x048 1 - Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 70 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 145 Number of Hardware Resets
6 0x010 4 0 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
7 ===== = = == Solid State Device Statistics (rev 1) ==
7 0x008 1 0 Percentage Used Endurance Indicator
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
