Can you please add the Micron M510DC to the smartmontools database and update
the drivedb.h with the following:
{ "Micron M500DC/M510DC Enterprise SSDs",
"Micron_M500DC_(EE|MT)FDDA[AK](120|240|480|800)MBB|" // tested with
// Micron_M500DC_EEFDDAA120MBB/129, Micron_M500DC_MTFDDAK800MBB/0129
"MICRON_M510DC_(EE|MT)FDDAK(120|240|480|800|960)MBP", // tested with
Micron_M510DC_MTFDDAK240MBP/0005
"", "",
Thank you
smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-win7(64)-sp1] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MICRON_M510DC_MTFDDAK240MBP
Serial Number: 15130F98C054
LU WWN Device Id: 5 00a075 10f98c054
Firmware Version: 0005
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jul 22 14:36:35 2015 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1115) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 3) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 001 - 0
9 Power_On_Hours -O--CK 100 100 001 - 115
12 Power_Cycle_Count -O--CK 100 100 001 - 3
170 Unknown_Attribute PO--CK 098 098 010 - 186
171 Unknown_Attribute -O--CK 100 100 001 - 0
172 Unknown_Attribute -O--CK 100 100 001 - 0
173 Unknown_Attribute PO--CK 100 100 000 - 7
174 Unknown_Attribute -O--CK 100 100 001 - 1
184 End-to-End_Error PO--CK 100 100 050 - 0
187 Reported_Uncorrect -O--CK 100 100 001 - 0
188 Command_Timeout -O--CK 100 100 001 - 0
194 Temperature_Celsius -O---K 070 066 000 - 30 (Min/Max 20/34)
195 Hardware_ECC_Recovered -O-RCK 100 100 001 - 283460
197 Current_Pending_Sector -O--CK 100 100 001 - 0
198 Offline_Uncorrectable ----CK 100 100 001 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 001 - 0
202 Unknown_SSD_Attribute ---RC- 100 100 001 - 0
206 Unknown_SSD_Attribute -OSR-- 100 100 001 - 0
247 Unknown_Attribute -O--CK 100 100 000 - 72409237
248 Unknown_Attribute -O--CK 100 100 000 - 71242663
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 16383 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x24 GPL R/O 429 Current Device Internal Status Data log
0x25 GPL R/O 145 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL VS 2000 Device vendor specific log
0xa0 SL VS 208 Device vendor specific log
0xa1-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 8193 Device vendor specific log
0xb6 SL VS 1 Device vendor specific log
0xb7-0xbf GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 80 Device vendor specific log
0xc1-0xdf GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (16383 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 115 -
# 2 Vendor (0xff) Completed without error 00% 114 -
# 3 Vendor (0xff) Completed without error 00% 71 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Completed [00% left] (57881389-57946924)
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 21/34 Celsius
Lifetime Min/Max Temperature: 20/34 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: -5/75 Celsius
Temperature History Size (Index): 478 (390)
Index Estimated Time Temperature Celsius
391 2015-07-22 06:39 29 **********
... ..( 42 skipped). .. **********
434 2015-07-22 07:22 29 **********
435 2015-07-22 07:23 ? -
436 2015-07-22 07:24 28 *********
437 2015-07-22 07:25 31 ************
438 2015-07-22 07:26 ? -
439 2015-07-22 07:27 27 ********
440 2015-07-22 07:28 29 **********
441 2015-07-22 07:29 31 ************
442 2015-07-22 07:30 33 **************
443 2015-07-22 07:31 35 ****************
444 2015-07-22 07:32 36 *****************
445 2015-07-22 07:33 37 ******************
446 2015-07-22 07:34 38 *******************
447 2015-07-22 07:35 38 *******************
448 2015-07-22 07:36 39 ********************
449 2015-07-22 07:37 39 ********************
450 2015-07-22 07:38 40 *********************
451 2015-07-22 07:39 40 *********************
452 2015-07-22 07:40 38 *******************
453 2015-07-22 07:41 37 ******************
454 2015-07-22 07:42 37 ******************
455 2015-07-22 07:43 36 *****************
456 2015-07-22 07:44 36 *****************
457 2015-07-22 07:45 36 *****************
458 2015-07-22 07:46 35 ****************
... ..( 8 skipped). .. ****************
467 2015-07-22 07:55 35 ****************
468 2015-07-22 07:56 34 ***************
... ..( 3 skipped). .. ***************
472 2015-07-22 08:00 34 ***************
473 2015-07-22 08:01 36 *****************
474 2015-07-22 08:02 37 ******************
475 2015-07-22 08:03 37 ******************
476 2015-07-22 08:04 36 *****************
477 2015-07-22 08:05 36 *****************
0 2015-07-22 08:06 29 **********
... ..(389 skipped). .. **********
390 2015-07-22 14:36 29 **********
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 3 --- Lifetime Power-On Resets
0x01 0x010 4 115 --- Power-on Hours
0x01 0x018 6 2222230778 --- Logical Sectors Written
0x01 0x020 6 57969018 --- Number of Write Commands
0x01 0x028 6 3703242851 --- Logical Sectors Read
0x01 0x030 6 136070482 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and
Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 23 --- Average Short Term Temperature
0x05 0x018 1 23 --- Average Long Term Temperature
0x05 0x020 1 34 --- Highest Temperature
0x05 0x028 1 20 --- Lowest Temperature
0x05 0x030 1 24 --- Highest Average Short Term Temperature
0x05 0x038 1 23 --- Lowest Average Short Term Temperature
0x05 0x040 1 23 --- Highest Average Long Term Temperature
0x05 0x048 1 23 --- Lowest Average Long Term Temperature
0x05 0x050 4 - --- Time in Over-Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x05 0x060 4 - --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 0 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
