Please add it to the database. Thanks in advance.
smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7-sp1] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Corsair Neutron GTX SSD
Serial Number: 14407907000097600005
Firmware Version: M311
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 6.0 Gb/s
Local Time is: Thu Dec 04 22:45:07 2014 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
9 Power_On_Hours -O--CK 100 100 000 - 3
12 Power_Cycle_Count -O--CK 100 100 000 - 9
171 Unknown_Attribute -O--CK 253 253 000 - 0
172 Unknown_Attribute -O--CK 253 253 000 - 0
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
194 Temperature_Celsius -O---- 030 000 000 - 30 (Min/Max 23/36)
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
204 Soft_ECC_Correction -OSR-- 100 100 000 - 0
231 Temperature_Celsius PO--CK 253 253 010 - 0
234 Unknown_Attribute -O--CK 100 100 000 - 101
241 Total_LBAs_Written -O--CK 100 100 000 - 308
242 Total_LBAs_Read -O--CK 100 100 000 - 141
250 Read_Error_Retry_Rate -O--CK 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x04 SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 19
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 19 [18] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 ff 00 00 00 c2 4f 00 e0 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f e0 40 40 00:26:35.880 SMART WRITE LOG
b0 00 da 00 00 00 00 00 c2 4f 00 40 40 00:26:35.880 SMART RETURN STATUS
b0 00 d0 00 01 00 00 00 c2 4f 00 40 40 00:26:35.870 SMART READ DATA
b0 00 d1 00 01 00 00 00 c2 4f 00 40 40 00:26:35.870 SMART READ ATTRIBUTE
THRESHOLDS [OBS-4]
b0 00 d8 00 00 00 00 00 c2 4f 00 40 40 00:26:35.870 SMART ENABLE
OPERATIONS
Error 18 [17] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 07 00 00 00 00 00 00 40 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 90 00 07 00 00 00 00 00 00 40 40 00:03:57.530 SET FEATURES
[Disable SATA feature]
ef 00 03 00 46 00 00 00 00 00 00 40 40 00:03:57.530 SET FEATURES [Set
transfer mode]
c6 00 00 00 10 00 00 00 00 00 00 40 40 00:03:57.530 SET MULTIPLE MODE
ec 00 00 00 00 00 00 00 00 00 00 40 40 00:03:57.530 IDENTIFY DEVICE
35 00 00 00 01 00 00 15 5f 9a e1 e0 e0 00:03:55.200 WRITE DMA EXT
Error 17 [16] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 01 00 00 15 5f 9a e1 e0 e0 00:03:55.200 WRITE DMA EXT
35 00 00 00 01 00 00 15 5f 9a e1 e0 e0 00:03:55.200 WRITE DMA EXT
25 00 00 00 01 00 00 15 5f 9a e1 e0 e0 00:03:55.200 READ DMA EXT
25 00 00 00 01 00 00 0c 32 2b ab e0 e0 00:03:55.200 READ DMA EXT
25 00 00 00 1e 00 00 0c 32 2b 8d e0 e0 00:03:55.200 READ DMA EXT
Error 16 [15] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 01 00 00 15 5f 9a e1 e0 e0 00:03:55.200 WRITE DMA EXT
35 00 00 00 01 00 00 15 5f 9a e1 e0 e0 00:03:55.200 WRITE DMA EXT
25 00 00 00 01 00 00 15 5f 9a e1 e0 e0 00:03:55.200 READ DMA EXT
25 00 00 00 01 00 00 0c 32 2b ab e0 e0 00:03:55.200 READ DMA EXT
25 00 00 00 1e 00 00 0c 32 2b 8d e0 e0 00:03:55.200 READ DMA EXT
Error 15 [14] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 50 3f 00 c2 4f 00 00 00 00 e0 08 16128 sectors at LBA =
0xc24f00000000 = 213644558204928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 00 00 00 a0 a0 00:03:49.980 READ DMA EXT
25 00 00 00 01 00 00 00 00 00 00 a0 a0 00:03:49.990 READ DMA EXT
25 00 00 00 01 00 00 00 00 00 00 e0 e0 00:03:47.590 READ DMA EXT
f5 da 00 3f 00 c2 4f 00 00 00 00 e0 e0 00:03:47.590 SECURITY FREEZE LOCK
b0 d2 da 3f 00 00 00 00 c2 4f 00 e0 e0 00:03:47.580 SMART RETURN STATUS
Error 14 [13] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 50 0c 45 00 00 00 00 00 00 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 03 03 0c 45 00 00 00 00 00 00 a0 a0 00:03:47.540 SET FEATURES [Set
transfer mode]
ef 03 03 0c 45 00 00 00 00 00 00 a0 a0 00:03:47.550 SET FEATURES [Set
transfer mode]
ef 03 03 0c 45 00 00 00 00 00 00 e0 e0 00:03:47.540 SET FEATURES [Set
transfer mode]
ef 00 03 01 0c 00 00 00 00 00 00 e0 e0 00:03:47.540 SET FEATURES [Set
transfer mode]
ec ff 00 00 01 00 00 00 00 00 01 e0 e0 00:03:47.490 IDENTIFY DEVICE
Error 13 [12] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 01 e0 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
a1 ff 00 00 01 00 00 00 00 00 01 e0 e0 00:03:47.420 IDENTIFY PACKET
DEVICE
ea 00 00 00 00 00 00 00 00 00 00 40 40 00:03:31.790 FLUSH CACHE EXT
61 00 01 00 08 00 00 0f 74 c8 9c 40 40 00:03:31.790 WRITE FPDMA QUEUED
61 00 01 00 00 00 00 11 fe 30 41 40 40 00:03:31.790 WRITE FPDMA QUEUED
61 00 01 00 f8 00 00 12 18 b7 e6 40 40 00:03:31.790 WRITE FPDMA QUEUED
Error 12 [11] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 40 40 00:03:31.790 FLUSH CACHE EXT
61 00 01 00 08 00 00 0f 74 c8 9c 40 40 00:03:31.790 WRITE FPDMA QUEUED
61 00 01 00 00 00 00 11 fe 30 41 40 40 00:03:31.790 WRITE FPDMA QUEUED
61 00 01 00 f8 00 00 12 18 b7 e6 40 40 00:03:31.790 WRITE FPDMA QUEUED
61 00 01 00 f0 00 00 13 65 3a 53 40 40 00:03:31.790 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 3 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
