Transcend's industrial CF170 CompactFlash cards support SMART.
Transcend product Web page:
http://www.transcend-info.com/Products/No-586
Attributes seem to match Transcend PSD320 PATA SSD, revealed by NVPlus
at 2012-05-21.
http://sourceforge.net/p/smartmontools/mailman/message/29426037/
Three files are attached:
proposed drive database entry for CF170 (also PSD320)
output of smartctl --identify
output of smartctl -T permissive -s on -x
{ "Transcend CF170", // tested TS16GCF170
"TS(8|16|32|64)GCF170",
"", // 20121218
"",
// I have no idea whether raw48 is appropriate
"-v 5,raw48,New_bad_block "
//"-v 12,raw48,Power_Cycle_Count "
"-v 161,raw48,Number_of_Valid_Spare_Block "
"-v 162,raw48,Number_of_child_block_used "
"-v 163,raw48,Number_of_initial_invalid_Block "
"-v 165,raw48,Maximum_Erase_Count "
"-v 166,raw48,Minimum_Erase_Count "
"-v 167,raw48,Average_Erase_Count "
//"-v 199,raw48,UDMA_CRC_Error_Count "
},
{ "Transcend PSD320",
"TS(32|64|128)GPSD320",
"", // 20120309
"",
// I have no idea whether raw48 is appropriate
"-v 5,raw48,New_bad_block "
//"-v 12,raw48,Power_Cycle_Count "
"-v 161,raw48,Number_of_Valid_Spare_Block "
"-v 162,raw48,Number_of_child_block_used "
"-v 163,raw48,Number_of_initial_invalid_Block "
"-v 165,raw48,Maximum_Erase_Count "
"-v 166,raw48,Minimum_Erase_Count "
"-v 167,raw48,Average_Erase_Count "
//"-v 199,raw48,UDMA_CRC_Error_Count "
},
smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-xp-sp3] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== ATA IDENTIFY DATA ===
Word Bit Value Description
0 - 0x848a General configuration
0 15 1 Device identifier: 0 = ATA, 1 = ATAPI
0 14:8 0x04 Vendor specific [RET-3]
0 7 1 Removable media device
0 5:3 0x1 Vendor specific [RET-3]
0 1 1 Vendor specific [RET-3]
1 - 0x3fff Cylinders [OBS-6]
3 - 0x000f Heads [OBS-6]
5 - 0x0240 Vendor specific [RET-3]
6 - 0x003f Sectors per track [OBS-6]
7-8 - . Reserved for CFA (Sectors per card)
7-8 . 0x01dd:7d3a
10-19 - . Serial number (String)
10-13 . 0x4139:3734:3937:4143 "A97497AC"
14-17 . 0x3234:3832:4243:3030 "2482BC00"
18-19 . 0x3031:3637 "0167"
20 - 0x0002 Vendor specific [RET-3]
21 - 0x0002 Vendor specific [RET-3]
22 - 0x0004 Vendor specific bytes on READ/WRITE LONG [OBS-4]
23-26 - . Firmware revision (String)
23-26 . 0x3230:3132:3132:3138 "20121218"
27-46 - . Model number (String)
27-30 . 0x5453:3136:4743:4631 "TS16GCF1"
31-34 . 0x3730:2020:2020:2020 "70 "
35-38 . 0x2020:2020:2020:2020 " "
39-42 . 0x2020:2020:2020:2020 " "
43-46 . 0x2020:2020:2020:2020 " "
47 - 0x8001 READ/WRITE MULTIPLE support
47 15:8 0x80 Must be set to 0x80
47 7:0 0x01 Maximum sectors per DRQ on READ/WRITE MULTIPLE
49 - 0x0200 Capabilities
49 9 1 LBA supported
51 - 0x0200 PIO data transfer mode [OBS-5]
53 - 0x0003 Field validity / Free-fall Control
53 1 1 Words 64-70 (PIO modes) are valid
53 0 1 Words 54-58 (CHS) are valid [OBS-6]
54 - 0x815a Current cylinders [OBS-6]
55 - 0x000f Current heads [OBS-6]
56 - 0x003f Current sectors per track [OBS-6]
57-58 - . Current capacity in sectors (DWord) [OBS-6]
57-58 . 0x7d3a:01dd (31292730)
59 - 0x0101 Sanitize Device - READ/WRITE MULTIPLE support
59 8 1 Bits 7:0 are valid
59 7:0 0x01 Current sectors per DRQ on READ/WRITE MULTIPLE
60-61 - . User addressable sectors for 28-bit commands (DWord)
60-61 . 0x8000:01dd (31293440)
64 - 0x0003 PIO modes
64 1 1 PIO mode 4 supported
64 0 1 PIO mode 3 supported
67 - 0x0078 Minimum PIO cycle time without flow control in ns
68 - 0x0078 Minimum PIO cycle time with IORDY flow control in ns
82 - 0x702a Commands and feature sets supported
82 14 1 NOP supported
82 13 1 READ BUFFER supported
82 12 1 WRITE BUFFER supported
82 5 1 Volatile write cache supported
82 3 1 Power Management feature set supported
82 1 1 Security feature set supported
83 - 0x740c Commands and feature sets supported
83 15:14 0x1 Must be set to 0x1
83 13 1 FLUSH CACHE EXT supported
83 12 1 FLUSH CACHE supported
83 10 1 48-bit Address feature set supported
83 3 1 APM feature set supported
83 2 1 CFA feature set supported
84 - 0x4000 Commands and feature sets supported
84 15:14 0x1 Must be set to 0x1
86 - 0x0400 Commands and feature sets supported or enabled
86 10 1 48-bit Address features set supported
89 - 0x0003 SECURITY ERASE UNIT time
92 - 0xfffe Master password revision code
93 - 0x6040 Hardware reset result (PATA)
93 15:14 0x1 Must be set to 0x1
93 13 1 Device detected CBLID- above(1)/below(0) ViHB
93 6 1 Device 0 responds when device 1 selected
100-103 - . User addressable sectors for 48-bit commands (QWord)
100-103 . 0x8000:01dd:0000:0000 (31293440)
128 - 0x0009 Security status
128 3 1 Security frozen
128 0 1 Security supported
129-159 - . Vendor specific
129-132 . 0x5452:414e:5343:454e
133-136 . 0x4400:0000:0000:0000
137-159 . 0x0000:0000:0000:00...
160 - 0x81f4 CFA power mode
161-167 - . Reserved for CFA
161-164 . 0x0000:0000:0000:8b5b
165-167 . 0x0000:0000:6000
smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-xp-sp3] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Transcend CF170
Device Model: TS16GCF170
Serial Number: A97497AC2482BC000167
Firmware Version: 20121218
User Capacity: 16,022,241,280 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: [No Information Found]
Local Time is: Thu Nov 13 17:27:25 2014 CST
SMART support is: Unavailable - device lacks SMART capability.
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Unavailable
Write cache is: Disabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not
supported.
SMART capabilities: (0x0000) Automatic saving of SMART data
is not implemented.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 New_bad_block ------ 100 100 000 - 0
12 Power_Cycle_Count ------ 100 100 000 - 253
161 Number_of_Valid_Spare_Block------ 100 100 000 - 255
162 Number_of_child_block_used------ 100 100 000 - 8
163 Number_of_initial_invalid_Block------ 100 100 000 - 5
164 Unknown_Attribute ------ 100 100 000 - 35320
165 Maximum_Erase_Count ------ 100 100 000 - 91
166 Minimum_Erase_Count ------ 100 100 000 - 2
167 Average_Erase_Count ------ 100 100 000 - 8
192 Power-Off_Retract_Count ------ 100 100 000 - 0
199 UDMA_CRC_Error_Count ------ 100 100 000 - 1
241 Total_LBAs_Written ------ 100 100 000 - 3068
242 Total_LBAs_Read ------ 100 100 000 - 15567
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Input/output error
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x06 SL R/O 1 SMART self-test log
0x80-0x8f SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 256
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11) not supported
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
