Hallo, OmegaPhil, Du meintest am 30.09.14:
> I'm not subscribed to the list, so please CC me if needed. > As requested in the USB support wiki page, I'm reporting failure to > work with the JMS539 SuperSpeed SATA II 3.0G Bridge chip in the > Sharkoon 5-bay RAID Station[0], even though supposedly the same > chipset works a lot better in the 5-bay RAID box[1]. > Tested with smartmontools v6.3: [...] > ==================================================================== > # ./smartctl -d sat -x /dev/sdd|less > smartctl 6.3 2014-07-26 r3976 [i686-linux-3.13.0-35-generic] (local > build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, > www.smartmontools.org > === START OF INFORMATION SECTION === > Device Model: HGST HDS724040ALE640 > Serial Number: PK1381PAKA9ZJS > Firmware Version: 0957 > User Capacity: 4,000,787,030,016 bytes [4.00 TB] > Sector Size: 512 bytes logical/physical > Device is: Not in smartctl database [for details use: -P > showall] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) > Local Time is: Tue Sep 30 15:42:47 2014 BST > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > AAM feature is: Unavailable > APM feature is: Disabled [...] Here: nearly same results, configured as "JBOD" with 4 disks, connected via eSATA, called as "smartctl -x /dev/sde". smartctl 5.43 2012-06-30 r3573 [i686-linux-3.12.16-multi] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: H/W LARGE Serial Number: FSASMU7CVOKSU71BB1DQ Firmware Version: 0957 User Capacity: 12.002.151.890.944 bytes [12,0 TB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Oct 2 05:16:56 2014 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Disabled Write cache is: Disabled ATA Security is: Disabled, NOT FROZEN [SEC1] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. Error logging capability: (0x00) Error logging NOT supported. No General Purpose Logging support. Read SMART Log Directory failed. ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error aborted command Read GP Log Directory failed. SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test Log not supported Device does not support Selective Self Tests/Logging Warning: device does not support SCT Commands SATA Phy Event Counters (GP Log 0x11) not supported ------------------------------------ Maybe the special problem is (in my case) the configuration as "JBOD". Viele Gruesse! Helmut ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
