Attached as corsair-neutron-gtx-unknown.txt is the output of smartctl
using the 6.3 drive database. I tried the svn drive database as well
but the output was identical, aside from the time.
According to this article:
http://forum.corsair.com/v3/showthread.php?t=89316
the drive has a sandforce controller. I tried simply adding the model
number to the sandforce regex in the drive database and seemed to get
more useful attributes out of it. In particular, the linetime read and
write numbers look plausible.
smartctl output from the modified drive db is attached as
corsair-neutron-gtx-sandforce.txt
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-2.6.32-431.3.1.el6.x86_64] (local
build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Corsair Neutron GTX SSD
Firmware Version: M311
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 6.0 Gb/s
Local Time is: Thu Sep 25 23:03:22 2014 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: ATA return descriptor not supported by controller
firmware
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
9 Power_On_Hours -O--CK 094 094 000 - 5878
12 Power_Cycle_Count -O--CK 100 100 000 - 5
171 Unknown_Attribute -O--CK 253 253 000 - 0
172 Unknown_Attribute -O--CK 253 253 000 - 0
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
194 Temperature_Celsius -O---- 024 000 000 - 24 (Min/Max 21/31)
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
204 Soft_ECC_Correction -OSR-- 100 100 000 - 0
231 Temperature_Celsius PO--CK 097 097 010 - 4
234 Unknown_Attribute -O--CK 100 100 000 - 59557
241 Total_LBAs_Written -O--CK 100 100 000 - 10849
242 Total_LBAs_Read -O--CK 100 100 000 - 4616
250 Read_Error_Retry_Rate -O--CK 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x04 SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 28 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28 [7] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 9a 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 9a 00 00 00:23:54.410 READ LOG EXT
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:23:54.410 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:23:54.410 IDENTIFY DEVICE
b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:23:54.400 SMART READ DATA
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:23:54.400 IDENTIFY DEVICE
Error 27 [6] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 99 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:23:54.410 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:23:54.410 IDENTIFY DEVICE
b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:23:54.400 SMART READ DATA
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:23:54.400 IDENTIFY DEVICE
60 00 10 00 08 00 00 00 2f e6 80 40 40 00:23:54.390 READ FPDMA QUEUED
Error 26 [5] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 99 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:20:49.440 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:20:49.430 IDENTIFY DEVICE
b0 00 d8 00 00 00 00 00 c2 4f 00 00 00 00:20:49.430 SMART ENABLE
OPERATIONS
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:20:49.430 IDENTIFY DEVICE
60 00 04 00 00 00 00 00 00 01 00 40 40 00:20:49.430 READ FPDMA QUEUED
Error 25 [4] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 da 00 00 00 00 00 c2 4f 00 00 00 00:15:49.690 SMART RETURN STATUS
60 00 01 00 00 00 00 00 00 00 00 40 40 00:11:01.020 READ FPDMA QUEUED
b0 00 da 00 00 00 00 00 c2 4f 00 00 00 00:10:49.920 SMART RETURN STATUS
60 00 08 00 30 00 00 1b f2 24 85 40 40 00:09:46.500 READ FPDMA QUEUED
60 00 45 00 28 00 00 1b e2 44 b0 40 40 00:09:46.500 READ FPDMA QUEUED
Error 24 [3] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 99 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:09:43.000 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:09:42.990 IDENTIFY DEVICE
b0 00 d8 00 00 00 00 00 c2 4f 00 00 00 00:09:42.990 SMART ENABLE
OPERATIONS
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:09:42.990 IDENTIFY DEVICE
60 00 04 00 00 00 00 00 00 01 00 40 40 00:09:42.990 READ FPDMA QUEUED
Error 23 [2] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 00 00 00:08:37.550 FLUSH CACHE EXT
60 00 08 00 00 00 00 1b df fe f8 40 40 00:08:37.390 READ FPDMA QUEUED
60 00 08 00 00 00 00 1b df ff f8 40 40 00:08:37.390 READ FPDMA QUEUED
60 00 08 00 00 00 00 1b df ff f0 40 40 00:08:37.390 READ FPDMA QUEUED
60 00 08 00 00 00 00 1b df ff 80 40 40 00:08:37.390 READ FPDMA QUEUED
Error 22 [1] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 99 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:07:59.410 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:59.400 IDENTIFY DEVICE
b0 00 d8 00 00 00 00 00 c2 4f 00 00 00 00:07:59.400 SMART ENABLE
OPERATIONS
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:59.400 IDENTIFY DEVICE
60 00 04 00 00 00 00 00 00 01 00 40 40 00:07:59.400 READ FPDMA QUEUED
Error 21 [0] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 08 00 00 00 01 5c 00 40 40 00:06:43.020 READ FPDMA QUEUED
60 00 30 00 00 00 00 00 01 5b d0 40 40 00:06:43.020 READ FPDMA QUEUED
60 00 18 00 08 00 00 00 01 4a 00 40 40 00:06:43.020 READ FPDMA QUEUED
60 00 20 00 00 00 00 00 01 49 e0 40 40 00:06:43.020 READ FPDMA QUEUED
60 00 08 00 08 00 00 00 01 5c 00 40 40 00:06:43.020 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 5878 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-2.6.32-431.3.1.el6.x86_64] (local
build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: Corsair Neutron GTX SSD
Firmware Version: M311
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 6.0 Gb/s
Local Time is: Thu Sep 25 23:03:22 2014 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: ATA return descriptor not supported by controller
firmware
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0/0
5 Retired_Block_Count -O--CK 253 253 036 - 0
9 Power_On_Hours_and_Msec -O--CK 094 094 000 - 5878h+00m+00.000s
12 Power_Cycle_Count -O--CK 100 100 000 - 5
171 Program_Fail_Count -O--CK 253 253 000 - 0
172 Erase_Fail_Count -O--CK 253 253 000 - 0
181 Program_Fail_Count -O--CK 253 253 000 - 0
182 Erase_Fail_Count -O--CK 253 253 000 - 0
194 Temperature_Celsius -O---- 024 000 000 - 24 (Min/Max 21/31)
201 Unc_Soft_Read_Err_Rate -OSR-- 100 100 000 - 0/0
204 Soft_ECC_Correct_Rate -OSR-- 100 100 000 - 0/0
231 SSD_Life_Left PO--CK 097 097 010 - 4
234 SandForce_Internal -O--CK 100 100 000 - 59557
241 Lifetime_Writes_GiB -O--CK 100 100 000 - 10849
242 Lifetime_Reads_GiB -O--CK 100 100 000 - 4616
250 Read_Error_Retry_Rate -O--CK 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x04 SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 28 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28 [7] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 9a 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 9a 00 00 00:23:54.410 READ LOG EXT
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:23:54.410 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:23:54.410 IDENTIFY DEVICE
b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:23:54.400 SMART READ DATA
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:23:54.400 IDENTIFY DEVICE
Error 27 [6] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 99 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:23:54.410 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:23:54.410 IDENTIFY DEVICE
b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:23:54.400 SMART READ DATA
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:23:54.400 IDENTIFY DEVICE
60 00 10 00 08 00 00 00 2f e6 80 40 40 00:23:54.390 READ FPDMA QUEUED
Error 26 [5] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 99 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:20:49.440 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:20:49.430 IDENTIFY DEVICE
b0 00 d8 00 00 00 00 00 c2 4f 00 00 00 00:20:49.430 SMART ENABLE
OPERATIONS
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:20:49.430 IDENTIFY DEVICE
60 00 04 00 00 00 00 00 00 01 00 40 40 00:20:49.430 READ FPDMA QUEUED
Error 25 [4] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 da 00 00 00 00 00 c2 4f 00 00 00 00:15:49.690 SMART RETURN STATUS
60 00 01 00 00 00 00 00 00 00 00 40 40 00:11:01.020 READ FPDMA QUEUED
b0 00 da 00 00 00 00 00 c2 4f 00 00 00 00:10:49.920 SMART RETURN STATUS
60 00 08 00 30 00 00 1b f2 24 85 40 40 00:09:46.500 READ FPDMA QUEUED
60 00 45 00 28 00 00 1b e2 44 b0 40 40 00:09:46.500 READ FPDMA QUEUED
Error 24 [3] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 99 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:09:43.000 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:09:42.990 IDENTIFY DEVICE
b0 00 d8 00 00 00 00 00 c2 4f 00 00 00 00:09:42.990 SMART ENABLE
OPERATIONS
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:09:42.990 IDENTIFY DEVICE
60 00 04 00 00 00 00 00 00 01 00 40 40 00:09:42.990 READ FPDMA QUEUED
Error 23 [2] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 00 00 00:08:37.550 FLUSH CACHE EXT
60 00 08 00 00 00 00 1b df fe f8 40 40 00:08:37.390 READ FPDMA QUEUED
60 00 08 00 00 00 00 1b df ff f8 40 40 00:08:37.390 READ FPDMA QUEUED
60 00 08 00 00 00 00 1b df ff f0 40 40 00:08:37.390 READ FPDMA QUEUED
60 00 08 00 00 00 00 1b df ff 80 40 40 00:08:37.390 READ FPDMA QUEUED
Error 22 [1] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 99 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 99 00 00 00:07:59.410 READ LOG EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:59.400 IDENTIFY DEVICE
b0 00 d8 00 00 00 00 00 c2 4f 00 00 00 00:07:59.400 SMART ENABLE
OPERATIONS
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:59.400 IDENTIFY DEVICE
60 00 04 00 00 00 00 00 00 01 00 40 40 00:07:59.400 READ FPDMA QUEUED
Error 21 [0] occurred at disk power-on lifetime: 1006 hours (41 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 08 00 00 00 01 5c 00 40 40 00:06:43.020 READ FPDMA QUEUED
60 00 30 00 00 00 00 00 01 5b d0 40 40 00:06:43.020 READ FPDMA QUEUED
60 00 18 00 08 00 00 00 01 4a 00 40 40 00:06:43.020 READ FPDMA QUEUED
60 00 20 00 00 00 00 00 01 49 e0 40 40 00:06:43.020 READ FPDMA QUEUED
60 00 08 00 08 00 00 00 01 5c 00 40 40 00:06:43.020 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 5878 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
