smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-64-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     M4-CT128M4SSD2
Firmware Version: 000F
User Capacity:    128,035,676,160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Tue Jun 17 21:20:55 2014 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)    Offline data collection activity
                     was never started.
                     Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test 
routine completed
                     without error or no self-test has ever
                     been run.
Total time to complete Offline
data collection:         (  595) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                     Auto Offline data collection on/off support.
                     Suspend Offline collection upon new
                     command.
                     Offline surface scan supported.
                     Self-test supported.
                     Conveyance Self-test supported.
                     Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                     power-saving mode.
                     Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                     General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (   9) minutes.
Conveyance self-test routine
recommended polling time:      (   3) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                     SCT Error Recovery Control supported.
                     SCT Feature Control supported.
                     SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
   1 Raw_Read_Error_Rate     POSR-K   100   100   050    -    0
   5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
   9 Power_On_Hours          -O--CK   100   100   001    -    5216
  12 Power_Cycle_Count       -O--CK   100   100   001    -    17
170 Unknown_Attribute       PO--CK   100   100   010    -    0
171 Unknown_Attribute       -O--CK   100   100   001    -    0
172 Unknown_Attribute       -O--CK   100   100   001    -    0
173 Unknown_Attribute       PO--CK   100   100   010    -    3
174 Unknown_Attribute       -O--CK   100   100   001    -    10
181 Program_Fail_Cnt_Total  -O---K   100   100   001    - 687199551574
183 Runtime_Bad_Block       -O--CK   100   100   001    -    0
184 End-to-End_Error        PO--CK   100   100   050    -    0
187 Reported_Uncorrect      -O--CK   100   100   001    -    0
188 Command_Timeout         -O--CK   100   100   001    -    0
189 High_Fly_Writes         -OSR--   100   100   001    -    123
194 Temperature_Celsius     -O---K   100   100   000    -    0
195 Hardware_ECC_Recovered  -O-RCK   100   100   001    -    0
196 Reallocated_Event_Count -O--CK   100   100   001    -    0
197 Current_Pending_Sector  -O--CK   100   100   001    -    0
198 Offline_Uncorrectable   ----CK   100   100   001    -    0
199 UDMA_CRC_Error_Count    -O--CK   100   100   001    -    0
202 Data_Address_Mark_Errs  ---RC-   100   100   001    -    0
206 Flying_Height           -OSR--   100   100   001    -    0
                             ||||||_ K auto-keep
                             |||||__ C event count
                             ||||___ R error rate
                             |||____ S speed/performance
                             ||_____ O updated online
                             |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has   51 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has 16383 sectors [Ext. Comprehensive SMART 
error log]
GP/S  Log at address 0x04 has  255 sectors [Device Statistics]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
GP    Log at address 0x07 has 3449 sectors [Extended self-test log]
SMART Log at address 0x09 has    1 sectors [Selective self-test log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
GP    Log at address 0xa0 has 2000 sectors [Device vendor specific log]
SMART Log at address 0xa0 has  208 sectors [Device vendor specific log]
GP/S  Log at address 0xa1 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa2 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa3 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa4 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa5 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa6 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa7 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa8 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa9 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xaa has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xab has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xac has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xad has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xae has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xaf has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb0 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb1 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb2 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb3 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb4 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb5 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb6 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb7 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb8 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb9 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xba has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xbb has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xbc has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xbd has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xbe has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xbf has    1 sectors [Device vendor specific log]
GP    Log at address 0xc0 has   80 sectors [Device vendor specific log]
GP/S  Log at address 0xc1 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc2 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc3 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc4 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc5 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc6 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc7 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc8 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc9 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xca has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xcb has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xcc has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xcd has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xce has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xcf has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd0 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd1 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd2 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd3 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd4 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd5 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd6 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd7 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd8 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xd9 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xda has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xdb has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xdc has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xdd has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xde has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xdf has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]

SMART Extended Comprehensive Error Log size 16383 not supported
SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log size 3449 not supported
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining 
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00% 5216         -
# 2  Short offline       Completed without error       00% 5216         -
# 3  Extended offline    Completed without error       00% 5215         -
# 4  Vendor (0xff)       Completed without error       00% 5214         -
# 5  Vendor (0xff)       Completed without error       00% 5200         -
# 6  Vendor (0xff)       Completed without error       00% 5188         -
# 7  Vendor (0xff)       Completed without error       00% 5175         -
# 8  Vendor (0xff)       Completed without error       00% 5163         -
# 9  Vendor (0xff)       Completed without error       00% 5150         -
#10  Vendor (0xff)       Completed without error       00% 5138         -
#11  Vendor (0xff)       Completed without error       00% 5125         -
#12  Vendor (0xff)       Completed without error       00% 5113         -
#13  Vendor (0xff)       Completed without error       00% 5100         -
#14  Vendor (0xff)       Completed without error       00% 5088         -
#15  Vendor (0xff)       Completed without error       00% 5075         -
#16  Vendor (0xff)       Completed without error       00% 5063         -
#17  Vendor (0xff)       Completed without error       00% 5050         -
#18  Vendor (0xff)       Completed without error       00% 5038         -
#19  Vendor (0xff)       Completed without error       00% 5025         -
#20  Vendor (0xff)       Completed without error       00% 5013         -
#21  Vendor (0xff)       Completed without error       00% 5000         -

SMART Selective self-test log data structure revision number 1
  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
     1        0        0  Not_testing
     2        0        0  Not_testing
     3        0        0  Not_testing
     4        0        0  Not_testing
     5        0        0  Not_testing
Selective self-test flags (0x0):
   After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       1 (0x0001)
SCT Support Level:                   0
Device State:                        Active (0)
Current Temperature:                  0 Celsius
Power Cycle Max Temperature:          0 Celsius
Lifetime    Max Temperature:          0 Celsius
SCT Temperature History Version:     2
Temperature Sampling Period:         10 minutes
Temperature Logging Interval:        10 minutes
Min/Max recommended Temperature:      0/70 Celsius
Min/Max Temperature Limit:           -5/75 Celsius
Temperature History Size (Index):    478 (18)

Index    Estimated Time   Temperature Celsius
   19    2014-06-14 13:50     ?  -
  ...    ..(475 skipped).    ..  -
   17    2014-06-17 21:10     ?  -
   18    2014-06-17 21:20     0  -

SCT Error Recovery Control:
            Read:     40 (4.0 seconds)
           Write:     40 (4.0 seconds)

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x000a  4            2  Device-to-host register FISes sent due to a COMRESET


------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to