smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win7-sp1] (sf-6.2-1)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD7500BPKX-22HPJT0
Serial Number: WD-WXC1AA387903
LU WWN Device Id: 5 0014ee 6040edf54
Firmware Version: 01.01A01
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun May 18 18:58:32 2014 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 124) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70b5) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 187 177 021 - 1650
4 Start_Stop_Count -O--CK 100 100 000 - 41
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 32
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 25
192 Power-Off_Retract_Count -O--CK 200 200 000 - 1
193 Load_Cycle_Count -O--CK 200 200 000 - 1474
194 Temperature_Celsius -O---K 119 105 000 - 28
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 32 -
# 2 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 21/27 Celsius
Lifetime Min/Max Temperature: 18/42 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (83)
Index Estimated Time Temperature Celsius
84 2014-05-18 16:51 31 ************
... ..( 15 skipped). .. ************
100 2014-05-18 17:07 31 ************
101 2014-05-18 17:08 32 *************
102 2014-05-18 17:09 31 ************
... ..( 7 skipped). .. ************
110 2014-05-18 17:17 31 ************
111 2014-05-18 17:18 32 *************
112 2014-05-18 17:19 31 ************
... ..( 2 skipped). .. ************
115 2014-05-18 17:22 31 ************
116 2014-05-18 17:23 32 *************
117 2014-05-18 17:24 31 ************
118 2014-05-18 17:25 32 *************
119 2014-05-18 17:26 32 *************
120 2014-05-18 17:27 31 ************
121 2014-05-18 17:28 32 *************
122 2014-05-18 17:29 32 *************
123 2014-05-18 17:30 32 *************
124 2014-05-18 17:31 31 ************
125 2014-05-18 17:32 32 *************
... ..( 9 skipped). .. *************
7 2014-05-18 17:42 32 *************
8 2014-05-18 17:43 31 ************
9 2014-05-18 17:44 32 *************
10 2014-05-18 17:45 31 ************
11 2014-05-18 17:46 32 *************
12 2014-05-18 17:47 32 *************
13 2014-05-18 17:48 32 *************
14 2014-05-18 17:49 31 ************
15 2014-05-18 17:50 32 *************
16 2014-05-18 17:51 32 *************
17 2014-05-18 17:52 31 ************
18 2014-05-18 17:53 31 ************
19 2014-05-18 17:54 31 ************
20 2014-05-18 17:55 32 *************
21 2014-05-18 17:56 31 ************
... ..( 4 skipped). .. ************
26 2014-05-18 18:01 31 ************
27 2014-05-18 18:02 32 *************
28 2014-05-18 18:03 31 ************
29 2014-05-18 18:04 31 ************
30 2014-05-18 18:05 31 ************
31 2014-05-18 18:06 32 *************
32 2014-05-18 18:07 31 ************
33 2014-05-18 18:08 31 ************
34 2014-05-18 18:09 32 *************
35 2014-05-18 18:10 32 *************
36 2014-05-18 18:11 31 ************
37 2014-05-18 18:12 32 *************
38 2014-05-18 18:13 31 ************
39 2014-05-18 18:14 32 *************
40 2014-05-18 18:15 31 ************
... ..( 2 skipped). .. ************
43 2014-05-18 18:18 31 ************
44 2014-05-18 18:19 32 *************
45 2014-05-18 18:20 32 *************
46 2014-05-18 18:21 31 ************
... ..( 7 skipped). .. ************
54 2014-05-18 18:29 31 ************
55 2014-05-18 18:30 30 ***********
... ..( 13 skipped). .. ***********
69 2014-05-18 18:44 30 ***********
70 2014-05-18 18:45 31 ************
... ..( 4 skipped). .. ************
75 2014-05-18 18:50 31 ************
76 2014-05-18 18:51 ? -
77 2014-05-18 18:52 22 ***
78 2014-05-18 18:53 21 **
79 2014-05-18 18:54 22 ***
80 2014-05-18 18:55 23 ****
81 2014-05-18 18:56 26 *******
82 2014-05-18 18:57 27 ********
83 2014-05-18 18:58 27 ********
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 407 Vendor specific
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
