Hi!
Would be nice if you could add my disk to the database.
Thank you,
Bernhard
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-60-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST4000VM000-1F3168
Firmware Version: SC25
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 9
ATA Standard is: Not recognized. Minor revision code: 0x001f
Local Time is: Fri Apr 18 00:02:12 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 107) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10b9) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 101 099 006 - 3618040
3 Spin_Up_Time PO---- 098 098 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 2
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 066 060 030 - 3963278
9 Power_On_Hours -O--CK 100 100 000 - 737
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 2
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 084 084 000 - 16
190 Airflow_Temperature_Cel -O---K 068 061 045 - 32 (Min/Max 25/39)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
193 Load_Cycle_Count -O--CK 100 100 000 - 2
194 Temperature_Celsius -O---K 032 040 000 - 32 (0 24 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP Log at address 0x21 has 1 sectors [Write stream error log]
GP Log at address 0x22 has 1 sectors [Read stream error log]
GP Log at address 0x24 has 1223 sectors [Reserved]
GP Log at address 0x25 has 1223 sectors [Reserved]
GP/S Log at address 0x30 has 9 sectors [Reserved]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xa1 has 20 sectors [Device vendor specific log]
GP Log at address 0xa2 has 4496 sectors [Device vendor specific log]
GP/S Log at address 0xa8 has 129 sectors [Device vendor specific log]
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
GP Log at address 0xab has 1 sectors [Device vendor specific log]
GP Log at address 0xb0 has 5176 sectors [Device vendor specific log]
GP Log at address 0xbe has 65535 sectors [Device vendor specific log]
GP Log at address 0xbf has 65535 sectors [Device vendor specific log]
GP/S Log at address 0xc1 has 10 sectors [Device vendor specific log]
GP/S Log at address 0xc3 has 8 sectors [Device vendor specific log]
GP/S Log at address 0xc4 has 5 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 737 -
# 2 Extended offline Completed without error 00% 736 -
# 3 Short offline Completed without error 00% 728 -
# 4 Extended offline Completed without error 00% 8 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 25/39 Celsius
Lifetime Min/Max Temperature: 24/39 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 94 minutes
Min/Max recommended Temperature: 1/61 Celsius
Min/Max Temperature Limit: 2/60 Celsius
Temperature History Size (Index): 128 (89)
Index Estimated Time Temperature Celsius
90 2014-04-09 15:36 34 ***************
91 2014-04-09 17:10 34 ***************
92 2014-04-09 18:44 33 **************
93 2014-04-09 20:18 33 **************
94 2014-04-09 21:52 34 ***************
95 2014-04-09 23:26 33 **************
96 2014-04-10 01:00 33 **************
97 2014-04-10 02:34 32 *************
98 2014-04-10 04:08 32 *************
99 2014-04-10 05:42 33 **************
100 2014-04-10 07:16 32 *************
101 2014-04-10 08:50 32 *************
102 2014-04-10 10:24 33 **************
... ..( 3 skipped). .. **************
106 2014-04-10 16:40 33 **************
107 2014-04-10 18:14 32 *************
108 2014-04-10 19:48 33 **************
109 2014-04-10 21:22 32 *************
... ..( 19 skipped). .. *************
1 2014-04-12 04:42 32 *************
2 2014-04-12 06:16 31 ************
3 2014-04-12 07:50 31 ************
4 2014-04-12 09:24 31 ************
5 2014-04-12 10:58 32 *************
6 2014-04-12 12:32 31 ************
7 2014-04-12 14:06 32 *************
8 2014-04-12 15:40 32 *************
9 2014-04-12 17:14 32 *************
10 2014-04-12 18:48 31 ************
... ..( 9 skipped). .. ************
20 2014-04-13 10:28 31 ************
21 2014-04-13 12:02 32 *************
22 2014-04-13 13:36 35 ****************
23 2014-04-13 15:10 37 ******************
24 2014-04-13 16:44 38 *******************
... ..( 5 skipped). .. *******************
30 2014-04-14 02:08 38 *******************
31 2014-04-14 03:42 37 ******************
32 2014-04-14 05:16 37 ******************
33 2014-04-14 06:50 38 *******************
... ..( 2 skipped). .. *******************
36 2014-04-14 11:32 38 *******************
37 2014-04-14 13:06 39 ********************
38 2014-04-14 14:40 38 *******************
39 2014-04-14 16:14 38 *******************
40 2014-04-14 17:48 37 ******************
41 2014-04-14 19:22 36 *****************
42 2014-04-14 20:56 36 *****************
43 2014-04-14 22:30 36 *****************
44 2014-04-15 00:04 35 ****************
45 2014-04-15 01:38 35 ****************
46 2014-04-15 03:12 34 ***************
47 2014-04-15 04:46 34 ***************
48 2014-04-15 06:20 35 ****************
... ..( 3 skipped). .. ****************
52 2014-04-15 12:36 35 ****************
53 2014-04-15 14:10 34 ***************
54 2014-04-15 15:44 34 ***************
55 2014-04-15 17:18 35 ****************
56 2014-04-15 18:52 34 ***************
57 2014-04-15 20:26 33 **************
58 2014-04-15 22:00 33 **************
59 2014-04-15 23:34 32 *************
60 2014-04-16 01:08 32 *************
61 2014-04-16 02:42 32 *************
62 2014-04-16 04:16 31 ************
63 2014-04-16 05:50 32 *************
64 2014-04-16 07:24 32 *************
65 2014-04-16 08:58 32 *************
66 2014-04-16 10:32 33 **************
67 2014-04-16 12:06 32 *************
... ..( 5 skipped). .. *************
73 2014-04-16 21:30 32 *************
74 2014-04-16 23:04 31 ************
75 2014-04-17 00:38 31 ************
76 2014-04-17 02:12 30 ***********
77 2014-04-17 03:46 30 ***********
78 2014-04-17 05:20 30 ***********
79 2014-04-17 06:54 31 ************
80 2014-04-17 08:28 31 ************
81 2014-04-17 10:02 31 ************
82 2014-04-17 11:36 32 *************
83 2014-04-17 13:10 32 *************
84 2014-04-17 14:44 32 *************
85 2014-04-17 16:18 34 ***************
86 2014-04-17 17:52 34 ***************
87 2014-04-17 19:26 33 **************
88 2014-04-17 21:00 33 **************
89 2014-04-17 22:34 33 **************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 16 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/NeoTech
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
