Toshiba STOR.E ALU 2 (model no. PX1750E-1HB5) requires "-d
usbsunplus", tested with smartmontools 5.41 on Winows XP. USB ID is
[0x0939:0x0b15]
Inside the case is a TOSHIBA MK2565GSX H, which is not in the current
smartctl database. See attached file for output of "smartctl -q
noserial -x /dev/sdc -d usbsunplus".
smartctl -q noserial -x /dev/sdc -d usbsunplus
smartctl 5.41 2011-06-09 r3365 [i686-w64-mingw32-xp-sp3] (sf-win32-5.41-1)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK2565GSX H
Firmware Version: GJ003A
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Nov 27 14:47:17 2013 WN
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off supp
ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1242
4 Start_Stop_Count -O--CK 100 100 000 - 3148
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 085 085 000 - 6384
10 Spin_Retry_Count PO--CK 162 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 1531
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 57
193 Load_Cycle_Count -O--CK 098 098 000 - 29861
194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max 11/58)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0
220 Disk_Shift -O---- 100 100 000 - 22
222 Loaded_Hours -O--CK 099 099 000 - 748
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 324
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 64 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA
_of_first_error
# 1 Extended offline Completed without error 00% 6384 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 20/42 Celsius
Lifetime Min/Max Temperature: 11/58 Celsius
Under/Over Temperature Limit Count: 0/14
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (470)
Index Estimated Time Temperature Celsius
471 2013-11-27 06:50 31 ************
... ..( 14 skipped). .. ************
8 2013-11-27 07:05 31 ************
9 2013-11-27 07:06 30 ***********
... ..( 18 skipped). .. ***********
28 2013-11-27 07:25 30 ***********
29 2013-11-27 07:26 31 ************
... ..(124 skipped). .. ************
154 2013-11-27 09:31 31 ************
155 2013-11-27 09:32 32 *************
156 2013-11-27 09:33 31 ************
157 2013-11-27 09:34 31 ************
158 2013-11-27 09:35 31 ************
159 2013-11-27 09:36 32 *************
... ..(246 skipped). .. *************
406 2013-11-27 13:43 32 *************
407 2013-11-27 13:44 31 ************
408 2013-11-27 13:45 31 ************
409 2013-11-27 13:46 ? -
410 2013-11-27 13:47 20 *
411 2013-11-27 13:48 21 **
412 2013-11-27 13:49 21 **
413 2013-11-27 13:50 22 ***
414 2013-11-27 13:51 22 ***
415 2013-11-27 13:52 22 ***
416 2013-11-27 13:53 23 ****
417 2013-11-27 13:54 23 ****
418 2013-11-27 13:55 24 *****
... ..( 3 skipped). .. *****
422 2013-11-27 13:59 24 *****
423 2013-11-27 14:00 25 ******
... ..( 2 skipped). .. ******
426 2013-11-27 14:03 25 ******
427 2013-11-27 14:04 26 *******
... ..( 4 skipped). .. *******
432 2013-11-27 14:09 26 *******
433 2013-11-27 14:10 27 ********
434 2013-11-27 14:11 27 ********
435 2013-11-27 14:12 40 *********************
436 2013-11-27 14:13 42 ***********************
437 2013-11-27 14:14 42 ***********************
438 2013-11-27 14:15 41 **********************
439 2013-11-27 14:16 40 *********************
440 2013-11-27 14:17 40 *********************
441 2013-11-27 14:18 39 ********************
442 2013-11-27 14:19 38 *******************
443 2013-11-27 14:20 38 *******************
444 2013-11-27 14:21 38 *******************
445 2013-11-27 14:22 37 ******************
446 2013-11-27 14:23 37 ******************
447 2013-11-27 14:24 37 ******************
448 2013-11-27 14:25 36 *****************
449 2013-11-27 14:26 36 *****************
450 2013-11-27 14:27 36 *****************
451 2013-11-27 14:28 35 ****************
... ..( 2 skipped). .. ****************
454 2013-11-27 14:31 35 ****************
455 2013-11-27 14:32 34 ***************
... ..( 4 skipped). .. ***************
460 2013-11-27 14:37 34 ***************
461 2013-11-27 14:38 33 **************
... ..( 5 skipped). .. **************
467 2013-11-27 14:44 33 **************
468 2013-11-27 14:45 32 *************
469 2013-11-27 14:46 32 *************
470 2013-11-27 14:47 32 *************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
