Hi, On Sun, Oct 06, 2013 at 11:47:07AM +0200, Andreas Mohr wrote: > Hi, > > On Sun, Oct 06, 2013 at 01:19:30AM +0000, > smartmontools-database-requ...@lists.sourceforge.net wrote: > > Date: Mon, 23 Sep 2013 23:44:55 -0400 > > From: Nikolay Martynov <mar.ko...@gmail.com> > > Got this device: ID 1058:0741 Western Digital Technologies, Inc. > > > > It a 2TB USB3 drive from WB. '-d sat' shows smart fine. > > > > Please let me know if any more information is required. > > Yes - we need the drive ID info (ID / firmware) > for proper assignment of that config.
Aww sorry - of course we do NOT need it - this is about controller-side -d sat config (rather than drive-side ID, e.g. for assigning the set of SMART attributes), thus USB VID:PID ought to be fully sufficient to reliably identify that controller. If you happen to want to submit the smartctl -x log anyway (good for reference purposes), then it might be useful to xxxx out some trailing parts of the Serial Number. Thank you for your report! Andreas Mohr ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
