______________
Best regards,
Dmitry Nosachev,
Senior engineer (x86 servers, storage,
VMware)
True System
WWW: http://www.truesystem.ru
Skype: d_nosachev
tel.: 7 (495) 747-3113 +309
fax.: 7 (495) 747-3112
mobile: 7 (916) 5513461
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-2.6.32-358.18.1.el6.x86_64] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HGST HUS724040ALE640
Serial Number: PK1331PAJL7MLS
LU WWN Device Id: 5 000cca 22be47a56
Firmware Version: MJAOA580
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Sep 11 14:45:50 2013 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command
from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 24) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 580) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 137 137 054 - 79
3 Spin_Up_Time POS--- 100 100 024 - 635
4 Start_Stop_Count -O--C- 100 100 000 - 6
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 119 119 020 - 35
9 Power_On_Hours -O--C- 100 100 000 - 94
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2
192 Power-Off_Retract_Count -O--CK 100 100 000 - 6
193 Load_Cycle_Count -O--C- 100 100 000 - 6
194 Temperature_Celsius -O---- 142 142 000 - 42 (Min/Max 23/42)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 94 -
# 2 Extended offline Aborted by host 80% 94 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 42 Celsius
Power Cycle Min/Max Temperature: 23/42 Celsius
Lifetime Min/Max Temperature: 23/42 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (61)
Index Estimated Time Temperature Celsius
62 2013-09-11 12:38 27 ********
... ..( 3 skipped). .. ********
66 2013-09-11 12:42 27 ********
67 2013-09-11 12:43 26 *******
68 2013-09-11 12:44 27 ********
... ..( 3 skipped). .. ********
72 2013-09-11 12:48 27 ********
73 2013-09-11 12:49 26 *******
74 2013-09-11 12:50 27 ********
75 2013-09-11 12:51 27 ********
76 2013-09-11 12:52 26 *******
77 2013-09-11 12:53 27 ********
78 2013-09-11 12:54 26 *******
79 2013-09-11 12:55 27 ********
80 2013-09-11 12:56 26 *******
... ..( 9 skipped). .. *******
90 2013-09-11 13:06 26 *******
91 2013-09-11 13:07 27 ********
92 2013-09-11 13:08 27 ********
93 2013-09-11 13:09 26 *******
... ..( 5 skipped). .. *******
99 2013-09-11 13:15 26 *******
100 2013-09-11 13:16 27 ********
101 2013-09-11 13:17 26 *******
102 2013-09-11 13:18 26 *******
103 2013-09-11 13:19 26 *******
104 2013-09-11 13:20 27 ********
... ..( 19 skipped). .. ********
124 2013-09-11 13:40 27 ********
125 2013-09-11 13:41 ? -
126 2013-09-11 13:42 24 *****
127 2013-09-11 13:43 25 ******
0 2013-09-11 13:44 26 *******
1 2013-09-11 13:45 27 ********
2 2013-09-11 13:46 28 *********
3 2013-09-11 13:47 28 *********
4 2013-09-11 13:48 29 **********
5 2013-09-11 13:49 30 ***********
6 2013-09-11 13:50 30 ***********
7 2013-09-11 13:51 31 ************
8 2013-09-11 13:52 32 *************
9 2013-09-11 13:53 32 *************
10 2013-09-11 13:54 33 **************
11 2013-09-11 13:55 33 **************
12 2013-09-11 13:56 33 **************
13 2013-09-11 13:57 34 ***************
14 2013-09-11 13:58 34 ***************
15 2013-09-11 13:59 35 ****************
16 2013-09-11 14:00 35 ****************
17 2013-09-11 14:01 35 ****************
18 2013-09-11 14:02 36 *****************
19 2013-09-11 14:03 36 *****************
20 2013-09-11 14:04 36 *****************
21 2013-09-11 14:05 37 ******************
22 2013-09-11 14:06 37 ******************
23 2013-09-11 14:07 37 ******************
24 2013-09-11 14:08 38 *******************
... ..( 4 skipped). .. *******************
29 2013-09-11 14:13 38 *******************
30 2013-09-11 14:14 39 ********************
... ..( 3 skipped). .. ********************
34 2013-09-11 14:18 39 ********************
35 2013-09-11 14:19 40 *********************
... ..( 5 skipped). .. *********************
41 2013-09-11 14:25 40 *********************
42 2013-09-11 14:26 41 **********************
... ..( 9 skipped). .. **********************
52 2013-09-11 14:36 41 **********************
53 2013-09-11 14:37 42 ***********************
... ..( 7 skipped). .. ***********************
61 2013-09-11 14:45 42 ***********************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 2 Lifetime Power-On Resets
1 0x018 6 0 Logical Sectors Written
1 0x020 6 0 Number of Write Commands
1 0x028 6 709 Logical Sectors Read
1 0x030 6 114 Number of Read Commands
3 ===== = = == Rotating Media Statistics (rev 1) ==
3 0x008 4 2 Spindle Motor Power-on Hours
3 0x010 4 2 Head Flying Hours
3 0x018 4 6 Head Load Events
3 0x020 4 0 Number of Reallocated Logical Sectors
3 0x028 4 0 Read Recovery Attempts
3 0x030 4 0 Number of Mechanical Start Failures
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 4 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 42 Current Temperature
5 0x010 1 27~ Average Short Term Temperature
5 0x018 1 -~ Average Long Term Temperature
5 0x020 1 42 Highest Temperature
5 0x028 1 23 Lowest Temperature
5 0x030 1 35~ Highest Average Short Term Temperature
5 0x038 1 25~ Lowest Average Short Term Temperature
5 0x040 1 -~ Highest Average Long Term Temperature
5 0x048 1 -~ Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 60 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 2 Number of Hardware Resets
6 0x010 4 1 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
------------------------------------------------------------------------------
How ServiceNow helps IT people transform IT departments:
1. Consolidate legacy IT systems to a single system of record for IT
2. Standardize and globalize service processes across IT
3. Implement zero-touch automation to replace manual, redundant tasks
http://pubads.g.doubleclick.net/gampad/clk?id=51271111&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
