#lsusb -v

Bus 004 Device 002: ID 1058:10a2 Western Digital Technologies, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x1058 Western Digital Technologies, Inc.
  idProduct          0x10a2
  bcdDevice           10.42
  iManufacturer           1 Western Digital
  iProduct                2 Elements 10A2
  iSerial                 3 575835314133333237393832
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           44
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              224mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               7
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x0a  EP 10 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               7
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           22
  bNumDeviceCaps          2
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000002
      Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat         128 micro seconds
Device Status:     0x0000
  (Bus Powered)

###########################################################

# smartctl --all -d sat /dev/sdb
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.9.10-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital My Passport (USB, AF)
Device Model:     WDC WD5000LMVW-11VEDS0
Serial Number:    WD-WX51A3327982
LU WWN Device Id: 5 0014ee 2b30f9e1a
Firmware Version: 01.01A01
User Capacity:    500 107 862 016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Aug 21 10:47:24 2013 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART STATUS RETURN: incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection:
Disabled.
Self-test execution status:      (   0) The previous self-test routine
completed
                                        without error or no self-test has
ever
                                        been run.
Total time to complete Offline
data collection:                ( 8400) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  97) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x7035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED
 WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always
    -       0
  3 Spin_Up_Time            0x0027   153   149   021    Pre-fail  Always
    -       1325
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always
    -       93
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always
    -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always
    -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always
    -       174
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always
    -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always
    -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always
    -       28
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always
    -       25
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always
    -       2861
194 Temperature_Celsius     0x0022   107   094   000    Old_age   Always
    -       36
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always
    -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always
    -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline
   -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always
    -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline
   -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Introducing Performance Central, a new site from SourceForge and 
AppDynamics. Performance Central is your source for news, insights, 
analysis and resources for efficient Application Performance Management. 
Visit us today!
http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to