smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-358.el6.x86_64]
(local build)
Copyright (C) 2002-12 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: PLEXTOR PX-128M5S
Serial Number: P02302120367
Firmware Version: 1.02
User Capacity: 128'035'676'160 bytes [128 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Thu Aug 15 16:00:47 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection
activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 10) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline
immediate.
No Auto Offline data collection
support.
Abort Offline collection upon
new
command.
No Offline surface scan
supported.
Self-test supported.
No Conveyance Self-test
supported.
No Selective Self-test
supported.
SMART capabilities: (0x0002) Does not save SMART data
before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging supported.
General Purpose Logging
supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO---- 100 100 070 - 0
5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 0
12 Power_Cycle_Count -O---- 100 100 000 - 4
177 Wear_Leveling_Count PO---- 100 100 000 - 38
178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0
181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0
182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
187 Reported_Uncorrect -O---- 100 100 000 - 0
192 Power-Off_Retract_Count PO---- 100 100 000 - 6
196 Reallocated_Event_Count PO---- 100 100 000 - 0
198 Offline_Uncorrectable PO---- 100 100 000 - 0
199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0
232 Available_Reservd_Space PO---- 100 100 010 - 0
241 Total_LBAs_Written PO---- 100 100 000 - 110
242 Total_LBAs_Read PO---- 100 100 000 - 3829
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 0
SMART Log Directory Version 0
GP/S Log at address 0x00 has 1 sectors [Log Directory]
GP/S Log at address 0x01 has 1 sectors [Summary SMART error log]
GP/S Log at address 0x06 has 1 sectors [SMART self-test log]
GP/S Log at address 0x07 has 1 sectors [Extended self-test log]
GP/S Log at address 0x10 has 1 sectors [NCQ Command Error log]
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 1 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 1 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 1 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 1 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 1 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 1 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 1 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 1 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 1 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 1 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 1 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 1 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 1 sectors [Host vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 0
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0
-
Device does not support Selective Self Tests/Logging
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: ? Celsius
Power Cycle Min/Max Temperature: ?/ ? Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 0 minutes
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 128 (0)
Index Estimated Time Temperature Celsius
1 2013-08-15 13:53 ? -
... ..(126 skipped). .. -
0 2013-08-15 16:00 ? -
SCT Error Recovery Control:
Read: 2 (0.2 seconds)
Write: 2 (0.2 seconds)
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 17 Device-to-host register FISes sent due to a
COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS,
non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS,
CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS,
non-CRC
------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
