Hello,
It seems the Toshiba DT01ACAxxx are not present in the SMARTmonTools Database.
The page on Toshiba website is :
http://storage.toshiba.eu/cms/en/hdd/product_overview/product_detail.jsp?productid=443
A smartctl -x /dev/sda of my disk is attached.
Do not hesitate to contact me if you want more tests on it.
Thank you !
--
Théophile Helleboid
root@spiff ~/smartmontools-6.1 # ./smartctl -x /dev/sda
smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.8.13-xxxx-grs-ipv6-64] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT01ACA100
Serial Number: Y2TVWVZPS
LU WWN Device Id: 5 000039 ff2cc3a45
Firmware Version: MS2OA750
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon May 20 23:04:23 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7604) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 127) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 140 140 054 - 75
3 Spin_Up_Time POS--- 120 120 024 - 204 (Average 177)
4 Start_Stop_Count -O--C- 100 100 000 - 11
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 118 118 020 - 33
9 Power_On_Hours -O--C- 100 100 000 - 1789
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 11
192 Power-Off_Retract_Count -O--CK 100 100 000 - 17
193 Load_Cycle_Count -O--C- 100 100 000 - 17
194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 22/41)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 1649 -
# 2 Short offline Completed without error 00% 1625 -
# 3 Short offline Completed without error 00% 1601 -
# 4 Extended offline Completed without error 00% 1585 -
# 5 Short offline Completed without error 00% 1553 -
# 6 Short offline Completed without error 00% 1529 -
# 7 Short offline Completed without error 00% 1505 -
# 8 Short offline Completed without error 00% 1481 -
# 9 Short offline Completed without error 00% 1457 -
#10 Short offline Completed without error 00% 1433 -
#11 Extended offline Completed without error 00% 1415 -
#12 Short offline Completed without error 00% 1385 -
#13 Short offline Completed without error 00% 1361 -
#14 Short offline Completed without error 00% 1337 -
#15 Short offline Completed without error 00% 1313 -
#16 Short offline Completed without error 00% 1289 -
#17 Short offline Completed without error 00% 1265 -
#18 Extended offline Completed without error 00% 1247 -
#19 Short offline Completed without error 00% 1217 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: SMART Off-line Data Collection executing
in background (4)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 35/38 Celsius
Lifetime Min/Max Temperature: 22/41 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (106)
Index Estimated Time Temperature Celsius
107 2013-05-20 20:57 36 *****************
... ..( 73 skipped). .. *****************
53 2013-05-20 22:11 36 *****************
54 2013-05-20 22:12 37 ******************
... ..( 15 skipped). .. ******************
70 2013-05-20 22:28 37 ******************
71 2013-05-20 22:29 36 *****************
... ..( 6 skipped). .. *****************
78 2013-05-20 22:36 36 *****************
79 2013-05-20 22:37 37 ******************
80 2013-05-20 22:38 36 *****************
... ..( 13 skipped). .. *****************
94 2013-05-20 22:52 36 *****************
95 2013-05-20 22:53 37 ******************
96 2013-05-20 22:54 36 *****************
... ..( 6 skipped). .. *****************
103 2013-05-20 23:01 36 *****************
104 2013-05-20 23:02 37 ******************
105 2013-05-20 23:03 37 ******************
106 2013-05-20 23:04 36 *****************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 1) ==
1 0x008 4 11 Lifetime Power-On Resets
1 0x010 4 1789 Power-on Hours
1 0x018 6 8089412912 Logical Sectors Written
1 0x020 6 475770566 Number of Write Commands
1 0x028 6 18324467199 Logical Sectors Read
1 0x030 6 21730404 Number of Read Commands
3 ===== = = == Rotating Media Statistics (rev 1) ==
3 0x008 4 1789 Spindle Motor Power-on Hours
3 0x010 4 1789 Head Flying Hours
3 0x018 4 17 Head Load Events
3 0x020 4 0 Number of Reallocated Logical Sectors
3 0x028 4 0 Read Recovery Attempts
3 0x030 4 14 Number of Mechanical Start Failures
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 0 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 36 Current Temperature
5 0x010 1 36~ Average Short Term Temperature
5 0x018 1 36~ Average Long Term Temperature
5 0x020 1 41 Highest Temperature
5 0x028 1 22 Lowest Temperature
5 0x030 1 39~ Highest Average Short Term Temperature
5 0x038 1 25~ Lowest Average Short Term Temperature
5 0x040 1 37~ Highest Average Long Term Temperature
5 0x048 1 25~ Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 60 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 19 Number of Hardware Resets
6 0x010 4 9 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
root@spiff ~/smartmontools-6.1 #
------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
