Hello,
I bought a 'CnMemory Core 2,5" USB 3.0' USB drive today. It consists of an
ASMedia USB bridge (174c:55aa) and a Seagate ST1000LM024 HN-M101MBB (1 TB) HDD.
Here's the product information:
http://www.cnmemory.de/core-25-usb-30
Both the USB bridge and the HDD are currently not supported by smartmontools.
But I could get an output with 'smartctl -d sat -a /dev/sdb'.
Please find attached the output of lsusb and smartctl.
Best regards,
Peter
Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x174c ASMedia Technology Inc.
idProduct 0x55aa
bcdDevice 1.00
iManufacturer 2 01234567890123456789012345678901234567890123
iProduct 3 External HDD
iSerial 1 20121123184F
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 44
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x0001
Self Powered
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-41-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S2RXJ9DD307805
LU WWN Device Id: 5 0004cf 209decbeb
Firmware Version: 2AR10002
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Mon Apr 15 09:00:05 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13080) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 218) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 086 086 025 - 4465
4 Start_Stop_Count -O--CK 100 100 000 - 12
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 29
10 Spin_Retry_Count -O--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 1
12 Power_Cycle_Count -O--CK 100 100 000 - 12
191 G-Sense_Error_Rate -O---K 252 252 000 - 0
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 064 055 000 - 29 (Min/Max 21/45)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 3
223 Load_Retry_Count -O--CK 100 100 000 - 1
225 Load_Cycle_Count -O--CK 100 100 000 - 341
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 2 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 2 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 2 sectors [Extended self-test log]
GP Log at address 0x08 has 2 sectors [Power Conditions]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xc0 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xc1 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xc2 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xc3 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xc4 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xc5 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xc6 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xc7 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xc8 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xc9 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xca has 16 sectors [Device vendor specific log]
GP/S Log at address 0xcb has 16 sectors [Device vendor specific log]
GP/S Log at address 0xcc has 16 sectors [Device vendor specific log]
GP/S Log at address 0xcd has 16 sectors [Device vendor specific log]
GP/S Log at address 0xce has 16 sectors [Device vendor specific log]
GP/S Log at address 0xcf has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd0 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd1 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd2 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd3 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd4 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd5 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd6 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd7 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd8 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xd9 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xda has 16 sectors [Device vendor specific log]
GP/S Log at address 0xdb has 16 sectors [Device vendor specific log]
GP/S Log at address 0xdc has 16 sectors [Device vendor specific log]
GP/S Log at address 0xdd has 16 sectors [Device vendor specific log]
GP/S Log at address 0xde has 16 sectors [Device vendor specific log]
GP/S Log at address 0xdf has 16 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been
run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 22/29 Celsius
Lifetime Min/Max Temperature: 21/45 Celsius
Lifetime Average Temperature: 80 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (60)
Index Estimated Time Temperature Celsius
61 2013-04-14 22:25 29 **********
62 2013-04-14 22:30 43 ************************
... ..( 2 skipped). .. ************************
65 2013-04-14 22:45 43 ************************
66 2013-04-14 22:50 44 *************************
67 2013-04-14 22:55 44 *************************
68 2013-04-14 23:00 44 *************************
69 2013-04-14 23:05 43 ************************
70 2013-04-14 23:10 43 ************************
71 2013-04-14 23:15 44 *************************
... ..( 24 skipped). .. *************************
96 2013-04-15 01:20 44 *************************
97 2013-04-15 01:25 43 ************************
98 2013-04-15 01:30 44 *************************
99 2013-04-15 01:35 43 ************************
100 2013-04-15 01:40 44 *************************
... ..( 21 skipped). .. *************************
122 2013-04-15 03:30 44 *************************
123 2013-04-15 03:35 35 ****************
124 2013-04-15 03:40 35 ****************
125 2013-04-15 03:45 34 ***************
126 2013-04-15 03:50 33 **************
127 2013-04-15 03:55 33 **************
0 2013-04-15 04:00 35 ****************
1 2013-04-15 04:05 37 ******************
2 2013-04-15 04:10 37 ******************
3 2013-04-15 04:15 38 *******************
4 2013-04-15 04:20 39 ********************
5 2013-04-15 04:25 36 *****************
... ..( 15 skipped). .. *****************
21 2013-04-15 05:45 36 *****************
22 2013-04-15 05:50 35 ****************
23 2013-04-15 05:55 36 *****************
... ..( 3 skipped). .. *****************
27 2013-04-15 06:15 36 *****************
28 2013-04-15 06:20 35 ****************
29 2013-04-15 06:25 36 *****************
... ..( 10 skipped). .. *****************
40 2013-04-15 07:20 36 *****************
41 2013-04-15 07:25 37 ******************
... ..( 10 skipped). .. ******************
52 2013-04-15 08:20 37 ******************
53 2013-04-15 08:25 36 *****************
54 2013-04-15 08:30 36 *****************
55 2013-04-15 08:35 35 ****************
... ..( 3 skipped). .. ****************
59 2013-04-15 08:55 35 ****************
60 2013-04-15 09:00 27 ********
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
