The drive is reported as not being in the smartctl database, see attachment as requested in FAQ

[root@mireille ~]# smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-2.6.40.3-0.fc15.i686] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     INTEL SSDSA2M120G2GC
Serial Number:    CVPO044303LJ120QGN
LU WWN Device Id: 5 001517 95946bd43
Firmware Version: 2CV102HD
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Thu Aug 18 18:31:28 2011 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    1) seconds.
Offline data collection
capabilities:                    (0x75) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Abort Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   1) minutes.
Conveyance self-test routine
recommended polling time:        (   1) minutes.

SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0020   100   100   000    Old_age   Offline      
-       0
  4 Start_Stop_Count        0x0030   100   100   000    Old_age   Offline      
-       0
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       
-       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       
-       5414
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       379
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       
-       26
225 Load_Cycle_Count        0x0030   200   200   000    Old_age   Offline      
-       33698
226 Load-in_Time            0x0032   100   100   000    Old_age   Always       
-       17703
227 Torq-amp_Count          0x0032   100   100   000    Old_age   Always       
-       1
228 Power-off_Retract_Count 0x0032   100   100   000    Old_age   Always       
-       4235834830
232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       
-       0
233 Media_Wearout_Indicator 0x0032   099   099   000    Old_age   Always       
-       0
184 End-to-End_Error        0x0033   100   100   099    Pre-fail  Always       
-       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Offline             Completed without error       00%      5414         -

Note: selective self-test log revision number (0) not 1 implies that no 
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been 
run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

------------------------------------------------------------------------------
Get a FREE DOWNLOAD! and learn more about uberSVN rich system, 
user administration capabilities and model configuration. Take 
the hassle out of deploying and managing Subversion and the 
tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to