Hi smartmontools team,
disk model Toshiba MK8050GACY is reported as
"Not in smartctl database" (by smartctl V5.41).
As recommended by the FAQs, I've executed commands
smartctl -t short /dev/hda
smartctl -a /dev/hda
The output of the latter command can be found attached.
Could you please add this device to the database?
Thanks!
Regards
- Stefan Zeier
=================================================================================
Alcatel-Lucent Deutschland AG
Domicile of the Company: Stuttgart - Local Court Stuttgart HRB 4026
Chairman of the Board of Directors: Michael Oppenhoff
Board of Management: Alf Henryk Wulf (Chairman) - Dr. Rainer Fechner - Peter
Kury
root@foo(root)$ ./smartctl -t short /dev/hda
smartctl 5.41 2011-06-09 r3365 [ppc-linux-2.4.20_mvl31-menem04] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line
mode".
Drive command "Execute SMART Short self-test routine immediately in off-line
mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Thu Jul 14 14:05:56 2011
root@foo(root)$ ./smartctl -a /dev/hda
smartctl 5.41 2011-06-09 r3365 [ppc-linux-2.4.20_mvl31-menem04] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK8050GACY
Serial Number: Z0B8T01LT
Firmware Version: TF105A
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Jul 14 14:07:06 2011 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 62) minutes.
SCT capabilities: (0x0011) SCT Status supported.
SCT Feature Control supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline
- 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always
- 967
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 7
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline
- 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always
- 2199
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 7
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 2
193 Load_Cycle_Count 0x0032 081 081 000 Old_age Always
- 190677
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 33 (Min/Max 24/37)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 4294967296
220 Disk_Shift 0x0002 100 100 000 Old_age Always
- 26
222 Loaded_Hours 0x0032 096 096 000 Old_age Always
- 1763
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always
- 0
224 Load_Friction 0x0022 100 100 000 Old_age Always
- 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always
- 350
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 2199 -
# 2 Extended offline Completed without error 00% 2192 -
# 3 Short offline Completed without error 00% 2165 -
# 4 Extended offline Completed without error 00% 2144 -
# 5 Short offline Completed without error 00% 2117 -
# 6 Extended offline Completed without error 00% 2072 -
# 7 Short offline Completed without error 00% 2045 -
# 8 Extended offline Completed without error 00% 2024 -
# 9 Short offline Completed without error 00% 1997 -
#10 Extended offline Completed without error 00% 1975 -
#11 Short offline Completed without error 00% 1949 -
#12 Extended offline Completed without error 00% 1903 -
#13 Short offline Completed without error 00% 1876 -
#14 Extended offline Completed without error 00% 1855 -
#15 Short offline Completed without error 00% 1828 -
#16 Extended offline Completed without error 00% 1807 -
#17 Short offline Completed without error 00% 1780 -
#18 Extended offline Completed without error 00% 1735 -
#19 Short offline Completed without error 00% 1708 -
#20 Extended offline Completed without error 00% 1686 -
#21 Short offline Completed without error 00% 1660 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@foo(root)$
------------------------------------------------------------------------------
AppSumo Presents a FREE Video for the SourceForge Community by Eric
Ries, the creator of the Lean Startup Methodology on "Lean Startup
Secrets Revealed." This video shows you how to validate your ideas,
optimize your ideas and identify your business strategy.
http://p.sf.net/sfu/appsumosfdev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
