Hello,
the ADATA SSD S599 with less than 100GB are not catched by the present
regular expression:
"ADATA SSD S599 ...GB|" // tested with ADATA SSD S599 256GB/3.1.0
it could be modified for example to:
"ADATA SSD S599 .?..GB|" // tested with ADATA SSD S599 256GB/3.1.0,
ADATA SSD S599 64GB/3.4.6
The output from smartctl -x -q noserial is attached for both cases.
Peter
smartctl 5.41 2011-02-08 r3256 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ADATA SSD S599 64GB
Firmware Version: 3.4.6
User Capacity: 60.022.480.896 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sun Feb 13 12:27:05 2011 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always
- 0
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 97693326115253
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 124
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always
- 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always
- 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline
- 36
177 Wear_Leveling_Count 0x0000 000 000 --- Old_age Offline
- 0
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always
- 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 052 054 000 Old_age Always
- 52 (Min/Max 0/54)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline
- 0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always
- 0
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always
- 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline
- 64
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always
- 128
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always
- 128
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always
- 256
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xb7 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 52 Celsius
Power Cycle Min/Max Temperature: 44/52 Celsius
Lifetime Min/Max Temperature: 0/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 478 (83)
Index Estimated Time Temperature Celsius
84 2011-02-13 04:30 ? -
... ..(394 skipped). .. -
1 2011-02-13 11:05 ? -
2 2011-02-13 11:06 54 ***********************************
... ..( 3 skipped). .. ***********************************
6 2011-02-13 11:10 54 ***********************************
7 2011-02-13 11:11 53 **********************************
8 2011-02-13 11:12 54 ***********************************
9 2011-02-13 11:13 54 ***********************************
10 2011-02-13 11:14 53 **********************************
... ..( 10 skipped). .. **********************************
21 2011-02-13 11:25 53 **********************************
22 2011-02-13 11:26 52 *********************************
... ..( 20 skipped). .. *********************************
43 2011-02-13 11:47 52 *********************************
44 2011-02-13 11:48 51 ********************************
45 2011-02-13 11:49 51 ********************************
46 2011-02-13 11:50 52 *********************************
47 2011-02-13 11:51 52 *********************************
48 2011-02-13 11:52 ? -
49 2011-02-13 11:53 45 **************************
50 2011-02-13 11:54 47 ****************************
51 2011-02-13 11:55 47 ****************************
52 2011-02-13 11:56 48 *****************************
53 2011-02-13 11:57 48 *****************************
54 2011-02-13 11:58 48 *****************************
55 2011-02-13 11:59 49 ******************************
... ..( 3 skipped). .. ******************************
59 2011-02-13 12:03 49 ******************************
60 2011-02-13 12:04 50 *******************************
... ..( 5 skipped). .. *******************************
66 2011-02-13 12:10 50 *******************************
67 2011-02-13 12:11 51 ********************************
... ..( 8 skipped). .. ********************************
76 2011-02-13 12:20 51 ********************************
77 2011-02-13 12:21 52 *********************************
... ..( 4 skipped). .. *********************************
82 2011-02-13 12:26 52 *********************************
83 2011-02-13 12:27 ? -
SCT Error Recovery Control:
Read: 256 (25,6 seconds)
Write: 256 (25,6 seconds)
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
smartctl 5.41 2011-02-08 r3256 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: ADATA SSD S599 64GB
Firmware Version: 3.4.6
User Capacity: 60.022.480.896 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sun Feb 13 12:34:11 2011 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always
- 0/0
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always
- 0
9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always
- 437h+28m+06.770s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 124
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always
- 0
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always
- 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline
- 36
177 Wear_Range_Delta 0x0000 000 000 --- Old_age Offline
- 0
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always
- 0
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 052 054 000 Old_age Always
- 52 (Min/Max 0/54)
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline
- 0/0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always
- 0
231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always
- 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline
- 64
234 SandForce_Internal 0x0032 000 000 000 Old_age Always
- 128
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always
- 128
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always
- 256
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xb7 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 52 Celsius
Power Cycle Min/Max Temperature: 44/52 Celsius
Lifetime Min/Max Temperature: 0/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 478 (90)
Index Estimated Time Temperature Celsius
91 2011-02-13 04:37 ? -
... ..(387 skipped). .. -
1 2011-02-13 11:05 ? -
2 2011-02-13 11:06 54 ***********************************
... ..( 3 skipped). .. ***********************************
6 2011-02-13 11:10 54 ***********************************
7 2011-02-13 11:11 53 **********************************
8 2011-02-13 11:12 54 ***********************************
9 2011-02-13 11:13 54 ***********************************
10 2011-02-13 11:14 53 **********************************
... ..( 10 skipped). .. **********************************
21 2011-02-13 11:25 53 **********************************
22 2011-02-13 11:26 52 *********************************
... ..( 20 skipped). .. *********************************
43 2011-02-13 11:47 52 *********************************
44 2011-02-13 11:48 51 ********************************
45 2011-02-13 11:49 51 ********************************
46 2011-02-13 11:50 52 *********************************
47 2011-02-13 11:51 52 *********************************
48 2011-02-13 11:52 ? -
49 2011-02-13 11:53 45 **************************
50 2011-02-13 11:54 47 ****************************
51 2011-02-13 11:55 47 ****************************
52 2011-02-13 11:56 48 *****************************
53 2011-02-13 11:57 48 *****************************
54 2011-02-13 11:58 48 *****************************
55 2011-02-13 11:59 49 ******************************
... ..( 3 skipped). .. ******************************
59 2011-02-13 12:03 49 ******************************
60 2011-02-13 12:04 50 *******************************
... ..( 5 skipped). .. *******************************
66 2011-02-13 12:10 50 *******************************
67 2011-02-13 12:11 51 ********************************
... ..( 8 skipped). .. ********************************
76 2011-02-13 12:20 51 ********************************
77 2011-02-13 12:21 52 *********************************
... ..( 11 skipped). .. *********************************
89 2011-02-13 12:33 52 *********************************
90 2011-02-13 12:34 ? -
SCT Error Recovery Control:
Read: 256 (25,6 seconds)
Write: 256 (25,6 seconds)
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
