as mentioned on
http://sourceforge.net/apps/trac/smartmontools/wiki/FAQ#MyATAdriveisnotinthesmartctlsmartddatabase
linux-8yej:/home/thomas # smartctl -a /dev/sdb
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE RPM)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: OCZ-AGILITY2
Serial Number: f0b300375
Firmware Version: 1.00
User Capacity: 50.020.540.416 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sun Jun 13 19:58:53 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 104 104 050 Pre-fail Always
- 8348651
5 Reallocated_Sector_Ct 0x0033 093 093 003 Pre-fail Always
- 1312
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 64759516889134
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 47
171 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
172 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline
- 25
181 Program_Fail_Cnt_Total 0x0000 000 000 000 Old_age Offline
- 0
182 Erase_Fail_Count_Total 0x0000 000 000 000 Old_age Offline
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 128 000 000 Old_age Always
- 128
195 Hardware_ECC_Recovered 0x001c 140 140 000 Old_age Offline
- 8348651
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always
- 0
231 Temperature_Celsius 0x0013 092 092 010 Pre-fail Always
- 1
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline
- 0
234 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always
- 0
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always
- 64
Error SMART Error Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Self Test Log Read Failed
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
linux-8yej:/home/thomas # smartctl -a /dev/sdb
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE RPM)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: OCZ-AGILITY2
Serial Number: f0b300375
Firmware Version: 1.00
User Capacity: 50.020.540.416 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sun Jun 13 20:11:53 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 106 106 050 Pre-fail Always
- 14062520
5 Reallocated_Sector_Ct 0x0033 093 093 003 Pre-fail Always
- 1312
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 36189394436142
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 47
171 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
172 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline
- 25
181 Program_Fail_Cnt_Total 0x0000 000 000 000 Old_age Offline
- 0
182 Erase_Fail_Count_Total 0x0000 000 000 000 Old_age Offline
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 128 000 000 Old_age Always
- 128
195 Hardware_ECC_Recovered 0x001c 142 142 000 Old_age Offline
- 14062520
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always
- 0
231 Temperature_Celsius 0x0013 092 092 010 Pre-fail Always
- 1
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline
- 0
234 Unknown_Attribute 0x0000 000 000 000 Old_age Offline
- 0
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always
- 0
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always
- 64
Error SMART Error Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Self Test Log Read Failed
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
