Hi Matthias, I see. It does not freak me out. Unfortunately I have very little experience working with MPI-in-containers, so I don't know the best way to debug this. What I do know is that some ABIs in Slurm change with Slurm major versions and dependencies need to be recompiled with newer versions of the latter. So maybe trying to recompile the OpenMPI-inside-the-container against the version of Slurm you are utilizing is the first I would try if I were in your shoes Best, Davide
On Thu, Mar 27, 2025 at 4:19 AM Matthias Leopold < matthias.leop...@meduniwien.ac.at> wrote: > Hi Davide, > > thanks for reply. > In my clusters OpenMPI is not present on the compute nodes. The > application (nccl-tests) is compiled inside the container against > OpenMPI. So when I run the same container in both clusters it's > effectively the exact same OpenMPI version. I hope you don't freak out > hearing this, but this worked with Slurm 21.08. I tried using a newer > container version and another OpenMPI (first it was Ubuntu 20.04 with > OpenMPI 4.1.7 from NVIDIA repo, second is Ubuntu 24.04 with Ubuntu > OpenMPI 4.1.6), but the error is the same when running the container in > Slurm 24.05. > > Matthias > > Am 26.03.25 um 21:24 schrieb Davide DelVento: > > Hi Matthias, > > Let's take the simplest things out first: have you compiled OpenMPI > > yourself, separately on both clusters, using the specific drivers for > > whatever network you have on each? In my experience OpenMPI is quite > > finicky about working correctly, unless you do that. And when I don't, I > > see exactly that error -- heck sometimes I see that even when OpenMPI is > > (supposed?) to be compiled and linked correctly and in such cases I > > resolve it by starting jobs with "mpirun --mca smsc xpmem -n $tasks > > whatever-else-you-need" (which obviously may or may not be relevant for > > your case). > > Cheers, > > Davide > > > > On Wed, Mar 26, 2025 at 12:51 PM Matthias Leopold via slurm-users > > <slurm-users@lists.schedmd.com <mailto:slurm-users@lists.schedmd.com>> > > wrote: > > > > Hi, > > > > I built a small Slurm 21.08 cluster with NVIDIA GPU hardware and > NVIDIA > > deepops framework a couple of years ago. It is based on Ubuntu 20.04 > > and > > makes use of the NVIDIA pyxis/enroot container solution. For > > operational > > validation I used the nccl-tests application in a container. > nccl-tests > > is compiled with MPI support (OpenMPI 4.1.6 or 4.1.7) and I used it > > also > > for validation of MPI jobs. Slurm jobs use "pmix" and tasks are > > launched > > via srun (not mpirun). Some of the GPUs can talk to each other via > > Infiniband, but MPI is rarely used at our site and I'm fully aware > that > > my MPI knowledge is very limited. Still it worked with Slurm 21.08. > > > > Now I built a Slurm 24.05 cluster based on Ubuntu 24.04 and started > to > > move hardware there. When I run my nccl-tests container (also with > > newer > > software) I see error messages like this: > > > > [node1:21437] OPAL ERROR: Unreachable in file ext3x_client.c at line > 111 > > > -------------------------------------------------------------------------- > > The application appears to have been direct launched using "srun", > > but OMPI was not built with SLURM's PMI support and therefore cannot > > execute. There are several options for building PMI support under > > SLURM, depending upon the SLURM version you are using: > > > > version 16.05 or later: you can use SLURM's PMIx support. This > > requires that you configure and build SLURM --with-pmix. > > > > Versions earlier than 16.05: you must use either SLURM's PMI-1 or > > PMI-2 support. SLURM builds PMI-1 by default, or you can manually > > install PMI-2. You must then build Open MPI using --with-pmi > > pointing > > to the SLURM PMI library location. > > > > Please configure as appropriate and try again. > > > -------------------------------------------------------------------------- > > *** An error occurred in MPI_Init > > *** on a NULL communicator > > *** MPI_ERRORS_ARE_FATAL (processes in this communicator will now > abort, > > *** and potentially your MPI job) > > [node1:21437] Local abort before MPI_INIT completed completed > > successfully, but am not able to aggregate error messages, and not > able > > to guarantee that all other processes were killed! > > > > One simple question: > > Is this related to https://github.com/open-mpi/ompi/issues/12471 > > <https://github.com/open-mpi/ompi/issues/12471>? > > If so: is there some workaround? > > > > I'm very grateful for any comments. I know that a lot of detail > > information is missing, but maybe someone can still already give me a > > hint where to look. > > > > Thanks a lot > > Matthias > > > > > > -- > > slurm-users mailing list -- slurm-users@lists.schedmd.com > > <mailto:slurm-users@lists.schedmd.com> > > To unsubscribe send an email to slurm-users-le...@lists.schedmd.com > > <mailto:slurm-users-le...@lists.schedmd.com> > > > > > >
-- slurm-users mailing list -- slurm-users@lists.schedmd.com To unsubscribe send an email to slurm-users-le...@lists.schedmd.com
