Anyone ever seen a dust collector for dry wall sanding. It is powered by a
vacuum cleaner (large shop one).
You have a 5 gallon bucket 1/2 full of water. Bucket lid has 2 hose
connection the one for air inlet is below water,
outlet is under side of lid. When you suck air (with vacuum cleaner) on top
of water on sealed bucket you force all
air into bucket through water. This action traps dust when you sand (with a
hose) drywall. Now if you do away with hose
to sand and fill bucket with CS or a mix of CS and water. Now you have the
worlds largest Nebulizer. You could run this in a pretty
good size room, with critters in room breathing in the CS. This could also
disinfect the room. Only draw back in a house you might
see some gray build up on walls from silver. You could do this in a room you
were going to paint, let the moisture dry. After you paint
the paint would have silver in it to stop mold. If we ever had contamination
in air (God forbid) you could use this large nebulizer to help
clear a room. You could blow air from vacuum cleaner in bucket below water
and air out would be treated same way. This way last
stop for air is through the air and not through the vacuum cleaner. This
would be a way to do any people or critters in room.
Only draw back is noisy vacuum cleaner. The larger the vacuum cleaner the
more air forced through CS/Water.
I have a large Sears Shop Vav and this system does a great job catching
drywall dust when sanding. It would make one heck of
a nebulizer.
Bob
