At 11:46 AM 10/7/2005 -0400, you wrote:
>
>Ode Coyote wrote:
>
>>  If both exceed their solubility limits and form molecular structures small
>> enough to stay suspended, then both and either can be considered colloidal.
>
>I think a suspension would be more apt.  Silver oxide and silver hydroxide
will
>form a suspension, but it will fall out and go to the bottom since it is
lacking
>in zeta potential.  I think the term colloid refers to a suspension that
does not
>settle out.
##  There is Brownian Motion that keeps small particles in suspension.
Milk and paint are examples of a colloid.  Not sure where 'emulsion' falls
in there.  I have seen emulsification and stratification effects in very
badly made CS where actual settling wasn't evident to a great degree.
>
>>
>>  Next questions: Can such a molecular structure consist of both molecules
>> in one crystal and can peroxide scavange one away and/or the other and
>> break the crystal apart while producing metallic silver in the process?
>
>I believe it can if I understand you.  I think you are asking if H2O2 and
Ag2O
>can react to form Ag2 and H2O and O2 if the silver oxide is in the form of a
>precipitated crystal.  I believe that is one reason why H2O2 can clear a
milky CS
>so quickly.
##  Well, maybe not exactly that. I'm thinking more along the lines of an
alloy and crystal lattice structure destruction with peroxide rather than a
molecular compound combination and chemical interaction...but the end
result could, in effect, be the same and include the possibility of both
pigment and light scattering effects co-existing.
IOW  A particle size color along with a pigment tint form black to dark
brown oxides in an alloy crystal accounting for various hues of the
particle size color, especially the variances of blacks in light to dark
'tea' colors where the base color could be pure yellow from size with
depth/intensity of pure yellow being from concentration.
>
>>
>>
>>  What role could suspended oxides in such a crystal play in 'shades of
>> black' darkened tints of a color produced by particle size? aka "tea"
colors.
>
>First you have to look at the solution and see if you are looking at a clear
>liquid that is absorbing light at certain wavelengths, or something that
is milky
>and reflecting light of certain wavelengths.  The color of the first is
caused by
>a colloid of fairly large particles that are absorbing in the violet and blue
>range.  The second by a suspension of silver oxide and silver hydroxide
particles
>that are brown colored.  However if you let it set, the second particle
should
>eventually settle out, only leaving the true colloid of silver particles.
##  I actually do see both and more on occasion.  A deeply
yellow/brown/black particle won't exactly settle out, but all the colored
particles will eventually collide with the sides and bottom of the
container and stick there leaving the liquid clear/colorless and still
showing all the signs of being ionic/colloidal silver. [I have photos]
Rinsing that with peroxide instantly dissolves the deep yellow/brown/black
coating.
 It's not always a matter of 'this or that', more like 'this and that' and
yet another.
>>
>>
>>  It is possible that "particles" can be too small for a laser to 'see'. [?]
>> Relativly high PPM, low conductivity and little TE is a possible
>> combination further complicating the use of meters?
>
>Atoms and ionis yes, but I believe that an aggregation of 2 or more silver
atoms
>will scatter light.  If you add H2O2, I believe that the particles will be
2 aoms
>each, yet you can still get some tyndall with it.
##  I was told by someone here that the diameter of just a few atoms still
falls under the range what visible light will reflect off of...or is that
refract?
 I so, that could explain a few conductivity/TE anomolies that pop up now
and then.

Ode
>
>Marshall
>
>>
>>
>> Ode
>>
>> At 04:50 PM 10/6/2005 -0400, you wrote:
>> >
>> >Dan Nave wrote:
>> >
>> >> This agrees with my experimental results where I had to use about 3
>> >> drops of H2O2
>> >> to clear 12 oz. of slightly yellowed CS.  Any less removed the yellow
>> >> color but left the CS cloudy.
>> >>
>> >> However, I'd appreciate if you could clear up a few things for me...
>> >>
>> >> What is the final proportion of ionic to colloidal content?  50/50?
>> >
>> >I really don't know.  It depends on the rates of conversion from
colloid to
>> >silver oxide, and silver oxide to colloid.  If the rates are the same,
then
>> >one might expect 50/50. However since silver oxide spontaneously converts
>> >back and forth with silver hydroxide when in solution, and I do not
believe
>> >silver hydroxide takes part in the reaction with H2O2, if the conversion
>> >between H2O2 and silver oxide and back again are the same, it could be
>> >66.6/33.3
>> >
>> >If the rates are different each direction, then it is anyone's guess.
>> >
>> >>
>> >>
>> >> Are you calling silver hydroxide the colloidal part and
>> >> silver oxide the ionic part?
>> >
>> >No, both silver oxide Ag2O and silver hydroxide AgOH are ionic.  If you
>> >have one you have the other when in water, they continually convert from
>> >one to the other, and I believe approach a 50/50 ratio at the solubility
>> >limit. I believe at lower concentrations the AgOH tends to dominate
though.
>> >
>> >Marshall
>> >
>> >
>> >
>> >
>> >--
>> >The Silver List is a moderated forum for discussing Colloidal Silver.
>> >
>> >Instructions for unsubscribing are posted at: http://silverlist.org
>> >
>> >To post, address your message to: [email protected]
>> >Silver List archive: http://escribe.com/health/thesilverlist/index.html
>> >
>> >Address Off-Topic messages to: [email protected]
>> >OT Archive: http://escribe.com/health/silverofftopiclist/index.html
>> >
>> >List maintainer: Mike Devour <[email protected]>
>> >
>> >
>> >
>> >--
>> >No virus found in this incoming message.
>> >Checked by AVG Anti-Virus.
>> >Version: 7.0.344 / Virus Database: 267.11.9/116 - Release Date: 9/30/2005
>> >
>> >
>> >
>> >
>> >--
>> >No virus found in this incoming message.
>> >Checked by AVG Anti-Virus.
>> >Version: 7.0.344 / Virus Database: 267.11.9 - Release Date: 9/30/2005
>> >
>> >
>>
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.344 / Virus Database: 267.11.13 - Release Date: 10/6/2005
>
>
>
>
>-- 
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.344 / Virus Database: 267.11.13/123 - Release Date: 10/6/2005
>
>
>
>
>-- 
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.344 / Virus Database: 267.11.13 - Release Date: 10/6/2005
>
>


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.13 - Release Date: 10/7/2005