BTW, the beam of light in 3-D is due to the Tyndall Effect. On Mon, Jul 20, 2020 at 8:18 AM Maha-Abu <[email protected]> wrote:
> Hi normally i don't post but personally i would say these are good signs, > the yellow colour i would say is due to slightly larger particles and > slight oxidation causing reflections from light. The fact that there is no > black residue would to me indicate a cleaner, less oxidised process, the > fact we see the laser beam is because of refraction & reflection of the > beam off of the silver, the wideer or more visible the beam, the higher the > particle density and probably smaller particle size (which would also > effect the wavelength, and there by colour you see, or don't see refracted > in the colloid. If i am wrong please someone put me right. Open to ideas. > > On 20 July 2020 12:12:49 pm Ode Coyote <[email protected]> wrote: > >> How long is it taking to run a 10 PPM batch? >> >> On Sun, Jul 19, 2020 at 10:46 AM PT Ferrance <[email protected]> >> wrote: >> >>> Hi, Lately I've noticed that when I clean my rods with a paper towel >>> nothing comes off of them. Also no black speckles in the eis and no light >>> yellow color. Laser shows a wider line and can almost see speckles in the >>> line... not the nice tight line I used to get from my silver puppy. >>> >>> Any ideas how to get things back to normal? >>> Thanks. >>> PT >>> >> >
