that works "quick & dirty" 30v is optimal. i use 24v which is fine too but i've upgraded to a lab bench pwr supply w/ up to 60v (for CGold) and precise current regulation. i torch the silver every 15-20min to recover that silver for use. at 10ma current, starting w/ electrolyte added to make the water conductive, it takes 22.5min to make a liter of (really) 15ppm ionic CS clear & clean. develops some color soon but not much if it's kept in the dark. same w/ the wall-wart 24v cuz it plugs into a 10ma current regulator
Sent from my iPhone > On Mar 27, 2017, at 7:08 AM, okierspike <[email protected]> wrote: > > I went on line to a salvage company and bought 2 power units for 10 dollars > apiece. They are ac to dc 30 volt and 750 mili amps. As far as stirring i > give my rods a shake and switch polarity at the halfway point. From my > research 30 volt is the target. Any feed back is appreciated. > > Craig > > > > Sent from my Verizon, Samsung Galaxy smartphone > > -------- Original message -------- > From: Y Arenias <[email protected]> > Date: 3/25/17 4:08 PM (GMT-06:00) > To: [email protected] > Subject: RE: CS>What's the best CS Generator? > > Thank you all for your replies! > > Re oxygen making silver oxide, so apparently it definitely doesn’t happen > with a bubbler. A chemist friend explained like this (please correct me if > he’s wrong): > > > > If it was a simple matter of bubbling oxygen into a silver ion solution to > form silver oxide, chemists wouldn't have to go through the chemical > reactions and add (1) silver nitrate AgNO3(aq) to (2) sodium hydroxide > NaOH(aq) (caustic soda also known as lye, the chemical liquid drain openers > comprise of), as follows: NaOH(aq)+AgNO3(aq)→AgOH(s)+NaNO3(aq) > > And then there’s a subsequent double reaction: 2AgOH→Ag2O(s)+H2O(l) = silver > oxide > > (The small (s) is for solid and the (l) is for liquid as silver oxide or for > that matter silver hydroxide are of very low solubility.) > > I agree that it does seem overpriced, but if it produces smaller ions, then > it’s going to be more effective, so maybe it’s worth the investment. So since > a bubbler is a better agitator (keeping the ions/particles from > agglomerating) than a magnetic stirrer, then it seems worth. If anyone has > any more thoughts on what’s the best CS generator please let me know. Of > course the criteria are the smallest ions/particles possible (i.e., without > agglomeration), and a strong, easy to use/maintain machine. > > > > From: bob Larson [mailto:[email protected]] > Sent: Friday, March 24, 2017 9:19 PM > To: [email protected] > Subject: Re: CS>What's the best CS Generator? > > > > mag stir plate is far better than bubbles. the silveredge is way inflated > overpriced & mr. barwick has in past presented a lot of skewed info among > good info. > adding Oxygen O2 to silver ions in water only makes silver oxide doesn't it ? > so? > > > On Mar 22, 2017, at 4:20 PM, Jerry Durand <[email protected]> wrote: > > I go with the SilverPuppy. > > On 03/22/2017 04:17 PM, Y Arenias wrote: > > Hi everyone, I’ve spent a lot of time researching CS generators, and it seems > the internet is full of conflicting information. > > I’ve read studies that say adding oxygen to silver ions makes them way more > powerful in destroying pathogens, which points to buying a Microparticle CS > generator from SilverEdge. Also, an oxygen bubbler seems to be the most > powerful agitator which keeps the ions at their smallest. So while I know > some people say a bubbler might introduce dust, seems unlikely since the > bubbles are at high pressure and go in and out at a fast rate. Ozone machines > are used to bubble ozone into water for drinking (large amounts) and I’ve > never heard anyone saying there’s a problem with dust. What do people say? > > Thanks! > > Y > > > > > > > -- > Jerry Durand, Durand Interstellar, Inc. > www.interstellar.com > tel: +1 408 356-3886 > @DurandInterstel >
