I've done that and it turns to muddy ...I have yellow and just use it like the clear...Debbie -----Original Message----- Date: Thursday, July 21, 2011 2:58:55 pm To: [email protected] From: [email protected] Subject: Re: CS>CS Production Method
I have a question, I have been making c/s for 11 yrs , this time it came out a bright yellow!! I did everything the same as always but.. the only thing different was that I went out and left it too long it was 22 pm all th rest was 13-14 pm. Could I put some h202 in the bottle? Mary ________________________________ From: Bill Halle <[email protected]> To: [email protected] Sent: Thu, July 21, 2011 9:25:26 AM Subject: CS>CS Production Method The suggestion to put a tiny amount of H202 in the water as an electrolyte is an interesting idea which I will try. In the meantime I have had a lot of success just adhering to the fundamentals: 1- Pyrex gallon jar for production 2- .9999 pure very thin silver wire, as thin and pure as I can buy it. 3- Make electrodes of about 5 feet long wire loosely looped to a twisted loop about 8 inches long about 1/2 inch diameter for both electrodes. 4- Just use the device per directions and you will get a very high quality 20 PPM product. Sent from my -- The Silver List is a moderated forum for discussing Colloidal Silver. Rules and Instructions: http://www.silverlist.org Unsubscribe: <mailto:[email protected]?subject=unsubscribe> Archives: http://www.mail-archive.com/[email protected]/maillist.html Off-Topic discussions: <mailto:[email protected]> List Owner: Mike Devour <mailto:[email protected]>
