My Final Results: Hanna Pwt meter reading Started with 0.2 distilled water +20 min = 0.3 +20 min = 0.9 +20 min = 3.4 some black res on one electrode(off with paper towel) +20 min= 5.6 some black res on both(off with pt each time after this) +20 min=10.4 +20 min=17.8 +10 min= 20.8 + 5 min= 23.8 + 5 min= 25.2
total 1 hour 40 min 750 ml water(3 cups) 25.2 x 0.4 = 10ppm I tasted 1 tbs. I could not taste anything at first I just took half of the tbs, then with the rest in my mouth and I could taste a metalic taste. After each min session I poured into a second jar and back and forth to stir the water up. Wiped off the silver rods and kept going. Nothing showed up until about the first hour. It has a strong tyndal effect with the red laser. It is not yellow but It is a little cloudier than the bottle of just DW I will let it sit for a few days and see if there is any change. Thats it for now. Hope this helps someone in the future. Beth ( Jumping up and down doing the silver dance!!) --- On Thu, 11/4/10, Beth <[email protected]> wrote: From: Beth <[email protected]> Subject: Re: CS>making first batch need input please To: [email protected] Received: Thursday, November 4, 2010, 8:10 PM Thanks so much Marshalee I put the electrodes 1.5 inches apart and I am using the gadget that only uses 1 battery even though it says it has 0-33volts(I am not sure how that works.) Anyway, it has a 20 min timer and every 20 min I am calculating the water with hanna pwt meter. So far I have started at .1 20 min later: .3 .9 3.4 had to wipe of black residue this round So it seems to be doubling every 20 min I will post the results when it is done. Trying to get to 10ppm without going yellow. And I need to calculate it from the pwt chart to get it to ppm. 1=.4 so I have a ways to go. I dont mind having a battery unit as it will be handy if we have power outage I'd like to invest in a wall unit in the future... along with a zapper. Trying to get healthy in a natural way and hopefully help others in my family with ailments that dont seem to get better with modern medicine. Beth Hi, Beth, I`m Marshalee, an oldie on the List. I`ve been using CS for 14 years now. I`m a Lyme Disease survivor thanks to CS. I make my own CS with a gadget that plugs in the wall, giving me 30 volts. (I have used the 3 9-volt batteries and salt method, but this works better.) I use 2 cups of room temp. DW, and 2 five-inch long pieces of 14 gauge .999 fine silver wires. I hook them to the box with alligator clips, and use a glass 2-cup measuring cup, used only for CS making. I leave it for 1 hour which gives about 18 PPM clear CS. Thanks to CS I`m well, and I`m not blue or gray (other than the hair, and well, I`m 58 now, so yes it IS supposed to be gray!) The CS has worked well for my animals too. I hope this will help! Let me know if you have any other questions.Marshalee On Thu, Nov 4, 2010 at 3:22 PM, Beth <[email protected]> wrote: Hi all. Just about to make my first batch however I would like input as to how to do this properly. The instructions from the company says to make the water hot to boiling point. But this is to make yellow silver. I dont want to make yellow product. So... Im thinking: do I need to heat the water or should I just plug it in and let it go and see how long it takes at room temp.? Also, how far apart should I put the probes? I have it in a 750ml jar. (Which is 5 cups of water.) I dont have a silver puppy or something to stir it as it cooks. I wish I did but I spent tons on everything I have so far and cant just go out and buy another one at this time. Beth
