Thank you for your very comprehensive post Mike and all the information in it. I have to say that my shingles have never been anything like as bad as those in the pictures you showed. I just either get 'stabbing' pains on either set of ribs or under the fleshy part of my arms, or I get four or five small lesions on my face. These go when I apply 10ppm CS plus DMSO usually within a week or two or three weeks if I forget and don't apply the potion. It always happens when I am particularly stressed; like having this fall and thinking my arm was broken! I usually enjoy quite good health although I am overweight and don't exercise enough, neither do I eat particularly well. Its just that every once in a while, I get this bone tiredness which I can't explain i.e. I'm not doing anything different. I don't think it is mold, as our house is brick built and extremely well ventilated, plus we have central heating and there is no mold smell. My hubby is a builder and he would know if there was damp or mold I am sure. This is the UK by the way. Thanks again for replying so comprehensively, I am finding the articles on herpes zoster most interesting. dee
On 30 Jan 2010, at 00:52, Mike Monett wrote: >> > > Dorothy, > > I also got shingles a long time ago. (Warning, graphic pictures) > > http://www.pstca.com/silversol/shingles/shingles.htm > > Like you, it came back. The cs I was making at the time was about > the same as most people here. But it had no effect on the shingles. > > The sores were open and bleeding. This made life miserable, > especially when taking a shower. > > At the same time, my Russian house guest and her son moved in. We > all started getting very painful cold sores. The cs had no effect on > them either. > > I spent a weekend experimenting with different electrode > configurations and currents, and monitoring the results using the > salt test. > > By Monday, I was making the strongest cs I had ever seen. It was so > strong I decided to not swallow it, but instead to hold it in my > mouth for 10 minutes and spit it out. > > My guests did the same. > > To my great astonishment, the following Wednesday the shingles sores > dried up and fell off. The cold sores vanished also. > > (I posted this to the silverlist long ago. Hopefully we will be able > to recover the archives and get them on line so everyone can see > them again.) > > Anyway, this tells me the ion content must be as high as possible to > combat the shingles and cold sore viruses. > > Since then, I have developed methods of making even stronger cs, and > doing it reliably. I discuss these on my web site at > > http://www.pstca.com/silversol/ > > Now, the shingles keeps trying to come back. If I don't take the cs > for a couple of days or a week, the stabbing pain and itching frenzy > starts again. As soon as I take the cs, it stops. > > This tells us a number of things. > > 1. The calculations that I plan on presenting show that the silver > content in the bloodstream is far too low to have any effect on > bacteria or viruses. 18ppb is about a factor of 10 or 20 too small > to have much effect on bacteria. I'm sure it will also have little > effect on viruses. > > 2. The lead to the conclusion that the silver ion is needed by the > immune system to make the proteins or enzymes that are needed to > combat bacteria and viruses. > > 3. This problem has been going on for almost a decade. This shows > the shingles virus cannot mutate and get past the immune system when > it has an adequate supply of high ion content cs. > > 4. The silver ions do not stay in the body very long. They are used > up and flushed out after a few days. So you need to keep on taking > cs regularly. > > 5. Sublingual absorption is the most effective way to deliver silver > ions to the bloodstream, where the immune system can grab them and > put them to work. > > 6. As a further discovery, plotting the conductance curves as I show > on my web site allows you to see when you have contamination on the > electrodes. The contamination could be ordinary sulphur or chlorine > from the environment. Whatever it is, it has a very detrimental > effect on the electrolysis process. > > 7. To minimize the contamination, I put my Godzilla generator in the > freezer compartment of a brand new, unused refrigerator. This > freezes the humidity in the air and prevents the chemical reaction > need for sulphur to tarnish the silver. > > 8. Afer several months, the electrodes are now very clean. I find > all the Hanna readings have dropped about 20% from the previous > values. For example, I usually read about 18uS using my method of > making cs. > > Now I read about 14uS, which is a 22% drop. This tells me that > contamination makes the Hanna read too high, and the actual silver > content is lower than assumed. This probably applies to everyone who > uses the Hanna or COM-100 to monitor their brew, since they will > also be subject to contamination from the environment. > > But the 14uS cs is very good at stopping the shingles. > > 9. The experience I went through with mold toxins tells me that most > symptoms you describe are caused by mold growing in the bedding. You > inhale them all night long, and the toxins do terrible damage to > your health. There may be other things involved as well, but I'm > pretty sure that mold is at the base of all these things. The spores > are extremely hard to kill and are invulnerable to anything we can > do at home. I am developing new techniques to kill the spores and > also filter them from the environment. > > As soon as we get the archives back on line, I wil start posting > more information on these processes. > > Best Regards, > > Mike M. > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: [email protected] > > Address Off-Topic messages to: [email protected] > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <[email protected]> > >
