Il giorno sab, 02/04/2022 alle 10.37 +0200, Simon Matter ha scritto:
> I'd suggest to check with ethtool if all interfaces are really on
> 1Gbps.
> This sound like you have a 100Mbps somewhere.
This is ethtool output[1]
the only difference compared to another server where I don't have these
problems while using an ADSL line at 200Mbit/s is:
Link partner advertised pause frame use: Symmetric Receive-only
On other server this setting is
Link partner advertised pause frame use: No
On both server the speed value is:
Speed: 1000Mb/s
> And of course the shorewall box has to be able to process and forward
> traffic at gigabit speed.
Yes, also I think so, but I cannot how to solve this problem.
Many thanks
Regards
Dario
--------------------
[1] # ethtool em1 (LAN nic)
Settings for em1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: on
Supports Wake-on: g
Wake-on: d
Current message level: 0x000000ff (255)
drv probe link timer ifdown ifup rx_err tx_err
Link detected: yes
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users
