Hi,
I'm trying to understand how I should configure OpenWRT and Shorewall
with bridge interface.
OpenWRT 18.06:
/etc/config/network:
config switch_vlan
option device 'switch0'
option vlan '110'
config interface 'wifi'
option proto 'static'
option ifname 'eth0.110'
option type 'bridge'
option ipaddr '172.19.110.254'
option netmask '255.255.255.0'
The interface is bridged with the wireless interface.
For now in '/etc/shorewall/interfaces' I have:
<ZONE-NAME> eth0.110 dhcp,required,wait=60,routeback=1
'The option 'routeback=1' is used following the advice (note) for the
'bridge' option at (1).
$ ip addr show br-wifi
6: br-wifi: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether e2:91:f5:04:75:94 brd ff:ff:ff:ff:ff:ff
inet 172.19.110.254/24 brd 172.19.110.255 scope global br-wifi
valid_lft forever preferred_lft forever
inet6 fe80::e091:f5ff:fe04:7594/64 scope link
valid_lft forever preferred_lft forever
Or should I simply follow the advice from (2) and (3, component 6)?
In other words, how should Shorewall be configured with bridge
interfaces on OpenWRT.
Any help/hint is appriciated.
1) http://shorewall.org/manpages/shorewall-interfaces.html
2) http://shorewall.org/bridge-Shorewall-perl.html
3) http://shorewall.org/MAC_Validation.html#Components
-Matt
--
Matt Darfeuille
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Shorewall-users mailing list
Shorewall-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shorewall-users
