What ip address should I specify then? Or do I assign a new IP for the firewall
on the interface for each gateway?
Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Tom Eastep <teas...@shorewall.net>
Date: 13/7/18 23:46 (GMT+08:00)
To: shorewall-users@lists.sourceforge.net
Subject: Re: [Shorewall-users] Multiple providers on the same interface in
Shorewall 5.0
On 07/13/2018 08:05 AM, James Andrewartha wrote:
> On 13/07/18 22:49, Matt Darfeuille wrote:
>> On 7/13/2018 4:05 PM, James Andrewartha wrote:
>>> Is the changelog accessible on the shorewall website outside of
>>> downloading the tarfile?
>>
>> You could look on sourceforge:
>>
>> https://sourceforge.net/p/shorewall/release/ci/master/tree/changelog.txt
>
> Ah, good thinking. So perhaps this will fix what I need:
>
>> Changes in 5.0.9 Beta 1
>> 2) Fix handling of optional provider with no IP address
>
> *upgrades to 5.1.12.3-1* ... nope:
>
> ERROR: Interface vlan22 is already associated with non-shared
> provider NAC /etc/shorewall/providers (line 12)
>
> And with addresses after the interface:
>
> ERROR: Command "ip -4 route replace 10.22.20.71 src 10.22.20.71 dev
> vlan22" Failed
>
You are specifying the same IP address for the interface and for the
gateway.
-Tom
--
Tom Eastep \ Q: What do you get when you cross a mobster with
Shoreline, \ an international standard?
Washington, USA \ A: Someone who makes you an offer you can't
http://shorewall.org \ understand
\_______________________________________________
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Shorewall-users mailing list
Shorewall-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shorewall-users
