(..) > Hardware is different between systems, no fancy video cards in either, > both actually have some generic AMD sludge. These are not super current > systems, the working system is probably 5-6+ years old, but maxed out in > RAM, 6 core CPU etc.. XPRA and this works, so I was ready to get to work > with it... The other, production, is a SoC type board (NOT A PI! AMD > A10 based 4 core). > > The only think I can find that is different software wise is KERNELS > > Working: > Linux xxxp6633w 5.8.0-55-generic #62~20.04.1-Ubuntu SMP Wed Jun 2 > 08:55:04 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux > > NON working > Linux xxxxSDRBox 5.4.0-77-generic #86-Ubuntu SMP Thu Jun 17 02:35:03 UTC > 2021 x86_64 x86_64 x86_64 GNU/Linux > > > Everything else between the two is the same for the OS. Both have had > updates to be as current as the Canocial repos are offering in the OS. At this point, my guess is that something hardware related is hanging and we've just had a few reports of problems with the ffmpeg vaapi hardware accelerated encoder: https://github.com/Xpra-org/xpra/issues/3174
If that's the cause of your problem, you can run with: xpra start --env=XPRA_VAAPI=0 .... Or even skipping any codec with hardware access: xpra start --video-encoders=all,-ffmpeg,-nvenc Video encoders are the only components that access the hardware somewhat more directly than through generic OS APIs. > What debug logs do you need to track??? As always, the server log. Since I suspect that the codecs are the problem, the output of: xpra encoding > The funny thing is that the PROGRAM will RUN on the "NON 'WORKING' " > system in that it operates as expected, but you can NOT CONNECT TO THE > GUI via the new X server. That's because the X11 virtual framebuffer is running, and your program is happily running on it, but the xpra server has crashes or is unresponsive. Cheers, Antoine > Start up command: > xpra start :100 --start=/home/X0/050a6/XXXX/bin/run-program > > Program name is obfuscated for reasons, I will provide privately, but > not in public right now. > > I will provide more data as requested, and asked for, I am not dumping > useless data to the list to sift through, I'd rather ask first, and > provide the targeted data to resolve this hopefully. > > What data, logs, etc. would you like? > > Nothing jumps out at me as to what might be the difference other than > the kernels... The program runs, it does its thing, you just can not > connect to the GUI X Server from Xpra to control it. > > Thanks for your time and insight. > > > _______________________________________________ > shifter-users mailing list > shifter-users@lists.devloop.org.uk > https://lists.devloop.org.uk/mailman/listinfo/shifter-users _______________________________________________ shifter-users mailing list shifter-users@lists.devloop.org.uk https://lists.devloop.org.uk/mailman/listinfo/shifter-users
