Greetings:

My system is a Dell Latitude CPt laptop with 500MHz and 512Mb RAM, on which I've
installed RH 7.1.  Everything seems to work except the PCMCIA slots.  According
to Windows 2000 it has:

     Texas Instruments PCI-1225 CardBus Controller
     Intel 82371AB/EB PCI Bus Master Controller

I would like to use any combination of, or all of the following (at appropriate
times):

     3Com 10/100 LAN + 56K CardBus Modem   "Model 3C3FEM656 C"   (PREFERRED
CHOICE works well in W2K)
     3Com 56K Global GSM & Cellular Modem PC Card  "Model 3CXM756"
     3Com 10/100 LAN CardBus "Model 3CFE575CT"
     Psion Gold Card 56K+Fax Multi-Function PC Card [GSM & ISDN Upgradeable]

The following shows what I believe to be pertinent lines from
"/var/log/messages"

     localhost kernel:   got res[1fff0000:1fff0fff] for resource 0 of Texas
Instruments PCI1225
     localhost pcmcia: Starting PCMCIA services:
     localhost kernel:   got res[1fff1000:1fff1fff] for resource 0 of Texas
Instruments PCI1225 (#2)
     localhost pcmcia:  modules
     ...
     localhost pcmcia:  cardmgr.
     localhost kernel: autorun ...
     localhost kernel: ... autorun DONE.
     ...
     localhost rc: Starting pcmcia:  succeeded
     ...
     localhost kernel: Linux PCMCIA Card Services 3.1.22
     localhost kernel:   options:  [pci] [cardbus] [pm]
     localhost kernel: PCI: Found IRQ 11 for device 00:03.0
     localhost kernel: PCI: The same IRQ used for device 00:03.1
     localhost kernel: PCI: The same IRQ used for device 00:07.2
     localhost kernel: PCI: Found IRQ 11 for device 00:03.1
     localhost kernel: PCI: The same IRQ used for device 00:03.0
     localhost kernel: PCI: The same IRQ used for device 00:07.2
     localhost kernel: Yenta IRQ list 0000, PCI irq11
     localhost kernel: Socket status: 45440701
     localhost kernel: Yenta IRQ list 0000, PCI irq11
     localhost kernel: Socket status: 535f2e5c

It does not seem to matter whether the card is plugged-in at power-up, or
plugged-in after login.  There is never any beeping to acknowledge the card and
the card doesn't appear to work.  All boot messages "OK".  Cardctl config
reports Socket 0 & Socket 1 "not configured", cardctl status reports no card in
either socket,
If anyone can assist, I would be delighted to hear from them.



_______________________________________________
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/seawolf-list

Reply via email to