Hello
Well I have got to the bottom of it (sort of).
I have a shared IRQ - but this is not the problem
The controller is working, either with the LSI firmware 1.26 or the Sun
firmware 1.28. (no setup , no config , it just works)
All the drives are healthy, they are an odd mix of sizes and types
Hello,
Thanks for the reply. I used to use the onboard SATA ports (intel DQ965DF) but
i have added a LSI-3041E-S controller and this is where i get the problems.
The controller is a Sun version (note the S not R in model) but it is a PC
version and I tried flashing it with the firmware from bot
What sort of controller/backplane/etc are you using? I've seen similar iostat
output with western drives on a supermicro SAS expander
roy
- Original Message -
> Also should be getting Illegal Request errors? (no hard or soft
> errors)
>
> Some more info: (I am doing a Scrub hence the hi
On Wed, 10 Aug 2011, steven wrote:
Also should be getting Illegal Request errors? (no hard or soft errors)
Illegal Request sounds like the OS is making a request that drive
firmware does not support. It is also possible that the request
became corrupted due to interface issue.
Bob
--
Bob
Also should be getting Illegal Request errors? (no hard or soft errors)
Some more info: (I am doing a Scrub hence the high blocking levels)
var/log$ iostat -Ex
extended device statistics
devicer/sw/s kr/s kw/s wait actv svc_t %w %b
sd0 1.1 16.9 30.6 463.
Hello
I am having problems with my ZFS, I have put in a LSI 3041E-S controller and
have 2 disks on it, and a further 4 on the motherboard. I am getting read
errors on the pool but not on any disk? Any idea where I should look to find
the problem?
Thanks
Steven
\> uname -a
SunOS X..com
