That's for pointing me towards that site! Saying that "txg_synctime_ms"
controls zfs's breathing was how I was thinking about it. Great way to
describe it! Unfortunately setting txg_synctime_ms to 1000 or even 1 didn't
make an improvement.
I tried adding the "disable-ohci=true" to the GRUB boot me
This is probably the same write throttle issue which has been discussed to
length on this list. Check the archives for zfs write throttle, especially
posts from Jun-Jul 2009.
Suresh
--
This message posted from opensolaris.org
___
zfs-discuss mailing l
arc-discuss doesn't have anything specifically to do with ZFS;
in particular, it has nothing to do with the ZFS ARC. Just an
unfortunate overlap of acronyms.
Cross-posted to zfs-discuss, where this probably belongs.
> Hey all1
>
> Recently I've decided to implement OpenSolaris as a
> target fo
Almost! It seems like it held out a bit further than last time. Now "arcsz"
hit's 2G (matching 'c'). But it still drops off. It started at 5.6GB/Min and
fell off to less than 700MB/Min.
A snippet of my arcstat.pl output looks like the following:
Time read miss miss% dmis dm% pmis pm% mm
Points to check are iostat,fsstat, zilstat, mpstat, prstat. Check for sw
interrupt sharing, disable ohci.
On 16 Nov 2010 00:27, "Khushil Dep" wrote:
> That controls zfs breathing, I'm on a phone writing this so u hope you
won't
> mind me pointing you to
>
listware.net/201005/opensolaris-zfs/11556
That controls zfs breathing, I'm on a phone writing this so u hope you won't
mind me pointing you to
listware.net/201005/opensolaris-zfs/115564-zfs-discuss-small-stalls-slowing-down-rsync-from-holding-network-saturation-every-5-seconds.html
On 16 Nov 2010 00:20, "Louis Carreiro" wrote:
Almost! It
Set your txg_synctime_ms to 0x3000 and retest please?
On 15 Nov 2010 23:23, "Louis" wrote:
> Hey all1
>
> Recently I've decided to implement OpenSolaris as a target for BackupExec.
>
> The server I've converted into a "Storage Appliance" is an IBM x3650 M2 w/
~4TB of on board storage via ~10 loca
Hey all1
Recently I've decided to implement OpenSolaris as a target for BackupExec.
The server I've converted into a "Storage Appliance" is an IBM x3650 M2 w/ ~4TB
of on board storage via ~10 local SATA drives and I'm using OpenSolaris
svn_134. I'm using a QLogic 4Gb FC HBA w/ the QLT driver an
