Marc Bevand gmail.com> writes:
>
> I have recently had to replace this AOC-SAT2-MV8 controller with another one
> (we accidentally broke a SATA connector during a maintainance operation). Its
> firmware version is using a totally different numbering scheme (it's probably
> more recent) and it
So what version is on you new card? Seems itd be far easier to
request from supermicro if we knew what to ask for.
On 7/1/08, Marc Bevand <[EMAIL PROTECTED]> wrote:
> I remember a similar pb with an AOC-SAT2-MV8 controller in a system of mine:
> Solaris rebooted each time the marvell88sx driver
Good point about the motherboard number, I replied but never spotted that. I'd
assumed it was the H8DM3-2, which is on the Sun HCL. Hadn't realised
Supermicro had quite so many similar model numbers.
This message posted from opensolaris.org
___
zf
I remember a similar pb with an AOC-SAT2-MV8 controller in a system of mine:
Solaris rebooted each time the marvell88sx driver tried to detect the disks
attached to it. I don't remember if happened during installation, or during
the first boot after a successful install. I ended up spending a ni
Christophe Dupre wrote:
> Tim,
> the system is a Silicon Mechanics A266; the motherboard is a
> SuperMicro H8DM8E-2
>
> I tried pluging the Marvell card in both 133MHz PCI-X slots. In one I
> get a lockup during install, in the other I get a reset on first boot.
Just a shot in the dark, but is it
Just chipping in with my 2c, it might not be a great help though.
First of all, it sounds to me like this might be a hardware fault. That
motherboard and controller combination are listed on Sun's HCL so should work
fine:
http://www.sun.com/bigadmin/hcl/data/systems/details/8454.html
The first
BIOS revs? Any other pci cards in the system?
On Sun, Jun 29, 2008 at 5:16 PM, Christophe Dupre <[EMAIL PROTECTED]>
wrote:
> Tim,
> the system is a Silicon Mechanics A266; the motherboard is a SuperMicro
> H8DM8E-2
>
> I tried pluging the Marvell card in both 133MHz PCI-X slots. In one I get a
Tim,
the system is a Silicon Mechanics A266; the motherboard is a SuperMicro
H8DM8E-2
I tried pluging the Marvell card in both 133MHz PCI-X slots. In one I
get a lockup during install, in the other I get a reset on first boot.
Tim wrote:
On Fri, Jun 27, 2008 at 2:47 PM, Christophe Dupre
On Fri, Jun 27, 2008 at 2:47 PM, Christophe Dupre <[EMAIL PROTECTED]>
wrote:
> Hi all,
> based on comments on this list, I bought a new server with 8 SATA bays
> and an AOC-SAT2-MV8 SATA controller. I them fired up a jumpstart of
> Solaris 10 5/08 of the server. Install runs through perfectly, wit
Hi all,
based on comments on this list, I bought a new server with 8 SATA bays
and an AOC-SAT2-MV8 SATA controller. I them fired up a jumpstart of
Solaris 10 5/08 of the server. Install runs through perfectly, with a
SVM mirror of / and swap on the first two disks. But during the first
boot, I
10 matches
Mail list logo
