On 18 May, 2007 - Dale Sears sent me these 1,5K bytes:
> Tomas Ögren wrote:
> >On 14 May, 2007 - Dale Sears sent me these 0,9K bytes:
> >
> >>I was wondering if this was a good setup for a 3320 single-bus,
> >>single-host attached JBOD. There are 12 146G disks in this array:
> >>
> >>I used:
> >>
See inline near then end...
Tomas Ögren wrote:
On 14 May, 2007 - Dale Sears sent me these 0,9K bytes:
I was wondering if this was a good setup for a 3320 single-bus,
single-host attached JBOD. There are 12 146G disks in this array:
I used:
zpool create pool1 \
raidz2 c2t0d0 c2t1d0 c2t2d0 c2
On 14 May, 2007 - Dale Sears sent me these 0,9K bytes:
> I was wondering if this was a good setup for a 3320 single-bus,
> single-host attached JBOD. There are 12 146G disks in this array:
>
> I used:
>
> zpool create pool1 \
> raidz2 c2t0d0 c2t1d0 c2t2d0 c2t3d0 c2t4d0 c2t5d0 c2t6d0 c2t8d0 c2t9
I was wondering if this was a good setup for a 3320 single-bus,
single-host attached JBOD. There are 12 146G disks in this array:
I used:
zpool create pool1 \
raidz2 c2t0d0 c2t1d0 c2t2d0 c2t3d0 c2t4d0 c2t5d0 c2t6d0 c2t8d0 c2t9d0
c2t10 \
spare c2t11d0 c2t12d0
(or something very similar)
This
