Since no reply for socket-can strategy... I long time ago created one
for by me and my needs.
But still... Here is something worth nothing, if anybody considers
socket-can domain!
https://github.com/ZoranStojsavljevic/meta-socketcan
Best Regards,
Zoran Stojsavljevic
___
On Thu, Jul 19, 201
Thanks very much for the information, Zoran!
And sorry I forgot to return to this issue before.
Best Regards,
Gunnar
On February 1, 2019 9:32:02 AM GMT+01:00, Zoran Stojsavljevic
wrote:
>Since no reply for socket-can strategy... I long time ago created one
>for by me and my needs.
>
>But sti
Hello,
we have got the problem that w/ the Yocto recipe and CMake install
targets as below always everything (headers and library or binary
respectively) is installed in the SDK.
The binary also goes into the SDK even though we just add it to
IMAGE_INSTALL based on a XILINX yocto build (rel-v2
Hi
I'm trying to build for an imx6 board with krogoth (I can't use newer vesion),
but i got an error during do_rootfs step. I'm triyng since 3 days to fix but
with no result.
Here the error :
Build Configuration:
BB_VERSION= "1.30.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING
Hi!
I have been running a yocto image (sumo) on a raspberry 3 B+ without any
problems, but wanted to test the new raspberry Pi 3 A+ board with it but I
just get the Rainbow screen on boot. I have updated meta-openembedded to
the latest sumo and meta-raspberry was still up to date with the latest
(
On Fri, Feb 1, 2019 at 1:11 PM Markus W wrote:
> Hi!
>
> I have been running a yocto image (sumo) on a raspberry 3 B+ without any
> problems, but wanted to test the new raspberry Pi 3 A+ board with it but I
> just get the Rainbow screen on boot. I have updated meta-openembedded to
> the latest su
Thanks Marek!
I pretty sure it doesn't boot, but I haven't confirmed it as you suggested
it.
I have never connected to the uart interface directly on the GPIO or via
bluetooth. It probably takes me more time to figure it out and to do this
than trying the thud branch as @agherzan has mentioned he
Hi Ed,
I don't want to state the obvious but firstly did you check that you have
the stuff asked :
*CMake Error: The source directory "/mnt/drive/yocto/poky/build/t*
*mp/work/cortexa9-vfp-neon-poky**-linux-gnueabi/mosquitto/1.5.*
*5-r0/mosquitto-1.5.5" does not exist.*
If
/mnt/drive/yocto/poky/
Hi Markus,
On Fri, Feb 1, 2019 at 2:54 PM Markus W wrote:
> Thanks Marek!
>
> I pretty sure it doesn't boot, but I haven't confirmed it as you suggested
> it.
>
> I have never connected to the uart interface directly on the GPIO or via
> bluetooth. It probably takes me more time to figure it out
On Fri, Feb 1, 2019 at 7:57 AM Yann CARDAILLAC
wrote:
> Hi Ed,
>
> I don't want to state the obvious but firstly did you check that you have
> the stuff asked :
>
>
> *CMake Error: The source directory "/mnt/drive/yocto/poky/build/t*
> *mp/work/cortexa9-vfp-neon-poky**-linux-gnueabi/mosquitto/1.5
Hi,
In my case, package A creates groups a1, a2 and a3.
B is actually a family of packages B1, B2 and B3 that each create user
b1, b2, or b3 respectively, but also adds the new user to groups a1, a2
and/or a3.
So in this case, it is necessary that package A first be installed AND
that its post-i
11 matches
Mail list logo
