Dear Asier,
In message
you wrote:
>
> Is there any Linux distribution based on the Yocto project that lets me
> configure my embedded kernel with Xenomai? If not, has anybody got any
> experinece in adding Xenomai to the Yocto project?
ELDK adds full Xenomai support starting with release v5.4 ;
This mail was sent out by Package Report System.
It will list all the recipes which can't check upstream version by script, and
will show how long it is since their last mannual version check.
You can check the detail information at
http://packages.yoctoproject.org/manuallychkinfo
PackageName
This mail was sent out by Package Report System.
This message list those recipes which need to be upgraded. If maintainers
believe some of them needn't to upgrade this time, they can fill in
RECIPE_NO_UPDATE_REASON_pn-"xxx" in upstream_tracking files to ignore this
recipe remainder until newer u
On Thu, Aug 29, 2013 at 06:20:14PM +0200, Eren Türkay wrote:
> Hello all,
Hi again,
> The possible solution that came to my mind is to get
> "boot-directdisk.bbclass", add initramfs installation, put the code
> in a seperate bbclass, rename the function as IMAGE_CMD_alix-hddimage,
> and add "alix
On 28 August 2013 11:55, Gary Thomas wrote:
>
> In the case of 'ipk' packages, you'll need to set up the board to make use
> of
> the exported package sets. There are a number of ways to do this, but in
> the
> case of 'ipk' you can do it all in a single file. Here's an example on my
> SabreLite
On 2 September 2013 06:05, Christian Gagneraud wrote:
> So right now, I'm thinking about:
> - CPU: Xeon E5, maybe 2 x E5-2670/90, for a total of 16 cores (32 threads)
> - Hard drives: 500GB, 1 TB or 2 TB (ideally with RAID if it can speed up the
> builds)
> - RAM: i don't really know, maybe 8 or 1
Hello Paul,
I followed this very interesting thread, and have a question on the last
statement, just for understanding:
Are the limitations you are explaining here, the same as mentioned in...
http://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html
...under "Checksums (Signatures
Hi Lothar,
On Monday 02 September 2013 15:17:28 lot...@denx.de wrote:
> I followed this very interesting thread, and have a question on the last
> statement, just for understanding:
>
> Are the limitations you are explaining here, the same as mentioned in...
> http://www.yoctoproject.org/docs/cur
Thank you for all your answers.
As Robert Berger wrote, Xenomai is a patch that you need to apply to the
kernel and then compile it. I haven't done it yet, but I think there might
be some difficulty if patching an already patched kernel. Is this the case
in the Yocto distributions?
Building the u
Hi. We are having some issues figuring out why one of our header files
fails to be installed properly into the SDK. The header file is
currently installed using a few lines in one of our recipe:
do_install_append() {
install -m 0644 ${S}/foo.h
${STAGING_DIR}/${MACHINE}${includedir}/linux/f
Hello,
What is the best stable BSP for a Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz?
I have a computer with 4 cpus and I would like to compile a Linux
distro with the Yocto project.
I've read about booting with a live usb but, how can I install the distro
in the machine? Can I automatize the hard d
The BSP for 3rd Generation iCore is this one:
https://www.yoctoproject.org/download/intel-3rd-generation-core-platforms-co
re-i3-i5-i7-ivy-bridge . of course, you will need the core Yocto Project
release - https://www.yoctoproject.org/downloads
Yes, you can install the distro on the machine.
I've incorporated the changes recommended by Andrei against the first version of
the patch. Whilst editing the README file I noticed that the IMAGE_FSTYPES
example didn't make sense (or include a closing double-quote) so I've fixed this
as well.
Currently running a build test with a 3.8.y series k
Image files will typically contain lots of null blocks and should compress well.
This will help with distribution of images over slow network links.
Signed-off-by: Paul Barker
---
README | 2 ++
classes/sdcard_image-rpi.bbclass | 20
2 files change
The SD image is always created with the extension "rpi-sdimg" and this cannot be
changed by editing IMAGE_FSTYPES.
Signed-off-by: Paul Barker
---
README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/README b/README
index 6f947c7..8fdfdd2 100644
--- a/README
+++ b/README
@@
On 03/09/13 00:35, Burton, Ross wrote:
Hi Ross,
On 2 September 2013 06:05, Christian Gagneraud wrote:
So right now, I'm thinking about:
- CPU: Xeon E5, maybe 2 x E5-2670/90, for a total of 16 cores (32 threads)
- Hard drives: 500GB, 1 TB or 2 TB (ideally with RAID if it can speed up the
buil
On 2 Sep 2013, at 22:45, Christian Gagneraud wrote:
>
> On 03/09/13 00:35, Burton, Ross wrote:
>
> Hi Ross,
>
>> On 2 September 2013 06:05, Christian Gagneraud wrote:
>>> So right now, I'm thinking about:
>>> - CPU: Xeon E5, maybe 2 x E5-2670/90, for a total of 16 cores (32 threads)
>>> - Hard
Thanks Sean,
that's great help. Do you know where the installer script is located? I was
hoping to find it in the yocto project scripts folder but I haven't seen
any helpful script for partitioning the hard drive and installing the yocto
distro.
Regards,
Katu
2013/9/2 Sean Liming
> The BSP fo
On 03/09/13 10:16, Chris Tapp wrote:
On 2 Sep 2013, at 22:45, Christian Gagneraud wrote:
On 03/09/13 00:35, Burton, Ross wrote:
Hi Ross,
On 2 September 2013 06:05, Christian Gagneraud wrote:
So right now, I'm thinking about:
- CPU: Xeon E5, maybe 2 x E5-2670/90, for a total of 16 cores (3
Hi,
On Sep 3, 2013, at 3:29 AM, Christian Gagneraud wrote:
>> Isn't RAID-5 going to be slower, especially if it's software? RAID 1
>> is probably better as you'll potentially double the write speed to disk.
>> I use a couple of Vertex SSDs in RAID 1 giving a theoretical write speed
>> near to 1G
On 09/02/2013 10:56 PM, Hans Beckérus wrote:
Hi. We are having some issues figuring out why one of our header files
fails to be installed properly into the SDK. The header file is
currently installed using a few lines in one of our recipe:
do_install_append() {
install -m 0644 ${S}/foo.
On 03/09/13 13:04, Elvis Dowson wrote:
Hi,
On Sep 3, 2013, at 3:29 AM, Christian Gagneraud mailto:chg...@gna.org>> wrote:
Isn't RAID-5 going to be slower, especially if it's software? RAID 1
is probably better as you'll potentially double the write speed to disk.
I use a couple of Vertex SSDs
On 02/09/13 03:07, Robert Berger wrote:
Hi,
On 08/30/2013 07:56 PM, Darren Hart wrote:
Is there any Linux distribution based on the Yocto project that lets
me configure my embedded kernel with Xenomai? If not, has anybody got
any experinece in adding Xenomai to the Yocto project?
I am not aw
Agenda:
* Opens collection - 5 min (Song)
* Yocto 1.5 status - 10 min (Song/team)
https://wiki.yoctoproject.org/wiki/Yocto_Project_v1.5_Status
* SWAT team rotation: Nitin -> Beth
* Opens - 10 min
* Team Sharing - 20 min
-Original Appointment-
We encourage people attending the meeting
Katu,
It has been awhile since I looked this one up. I believe the installer
script is called init-install.sh under the /meta/recipes-core. If you don't
use a serial debug port with a terminal to catch the boot menu, you will
have to modify the syslinux.cfg file (or grub.cfg for EFI boot) to ru
> Does your RT-threads have access to the full linux userland?
> I'm thinking about D-BUS comms, Qt framework, networking stuff, ...
> Or do they live in their own shell and communicate with the non-rt world
via a dedicated system?
> As well, have you tried/use it in a multi core context, where one
26 matches
Mail list logo
