On 2013-02-20 00:21, Satya Swaroop Damarla wrote:
Hi Gary,
I think you are right that we need may be the new uboot version but it is not
available in the uboot directory of the poky and i get the follwoing warning
and the simulation is
ending like previously
NOTE: Resolving any missing ta
On 2013-02-19 09:02, Satya Swaroop Damarla wrote:
Unfortunately "tec_config" didnot work. Here is the error message
I think you need a newer U-Boot to get the support for this board.
Try
PREFERRED_VERSION_u-boot ?= "v2012.10%"
or even
PREFERRED_VERSION_u-boot ?= "v2013.01%"
Log data follo
Unfortunately "tec_config" didnot work. Here is the error message
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 8 CROSS_COMPILE=arm-poky-linux-gnueabi-
CC=arm-poky-linux-gnueabi-gcc
--sysroot=/home/build/yocto/poky/buildTamonten/tmp/sysroots/skidata-tamonten
tec_c
On 2013-02-19 06:28, Satya Swaroop Damarla wrote:
Hi,
I want to build a basic image for the Avionic Tamonten board using Yocto. SO, I
created a skidata-tamonten.conf in the list of machines based on the
beagleboard.conf but I dont
know what to add for the UBOOT_MACHINE= . I tried my best to us
Hi,
I want to build a basic image for the Avionic Tamonten board using Yocto.
SO, I created a skidata-tamonten.conf in the list of machines based on the
beagleboard.conf but I dont know what to add for the UBOOT_MACHINE= . I
tried my best to use the same "omap_beagle_conf" but it doesnot boot
prop
