?
All the Best,
Jakob
On 19.09.2018 11:05, Jakob Hasse wrote:
Hello,
I have several projects hosted in Azure DepOs (former Visual Studio online).
When I glone them with git inside my host machine or the Ubuntu 16.04
container, everything works fine. When I use bitbake to build the recipe with
7;Loughlin wrote:
>
> From: yocto-boun...@yoctoproject.org [yocto-boun...@yoctoproject.org] on
> behalf of Jakob Hasse [jakob.ha...@qiio.com]
> Sent: 19 September 2018 10:05
> To: Yocto List
> Cc: Andrii Voloshyn
> Subject: [yocto] git w
install -m 0755 ${S}/bin/my-app ${D}${bindir}/my-app
chrpath -d ${D}${bindir}/my-app
install -d ${D}${sysconfdir}/init.d
install -c -m 755 ${WORKDIR}/${INITSCRIPT_NAME}
${D}${sysconfdir}/init.d/${INITSCRIPT_NAME}
}
All the Best
Jakob
--
Jakob Hasse
Software Developement
On 04.06.2018 17:53, Bruce Ashfield wrote:
On 2018-06-01 12:15 PM, Jakob Hasse wrote:
Hello Bruce,
Thank you very much for the quick response. I tried to built in the
kernel changes. But the iptables error persists.
I double checked over the weekend, and I have no problems with
linux-yocto
message and one WARNING though, but
it does :) If I have more problems, I'll come back to the list.
Thank you for the help so far.
All the Best,
Jakob
On 05.06.2018 18:23, Jakob Hasse wrote:
Hello,
right now, there is no insmod warning anymore, only iptables does
still not work with the nat
Hello,
we would like to have different images with different kernel
configs/device trees. E.g., we would like to have systemA with uart2 and
systemB without uart2 but spi1 instead, with all the different
configurations and device trees. The hardware does not change in this case.
How can I ma
: can't
initialize iptables table `nat': Table does not exist (do you need to
insmod?)
Perhaps iptables or your kernel needs to be upgraded.
(exit status 3)
Best Regards,
Jakob
On 05.06.2018 18:11, Jakob Hasse wrote:
On 04.06.2018 17:53, Bruce Ashfield wrote:
On 2018-06-01 12:15
ps://bugzilla.yoctoproject.org/show_bug.cgi?id=12025
only that I'm not using different machines. This bug doesn't seem to be
resolved yet.
Our Yocto-distribution is DIGI Embedded Yocto. So non-standard.
Shall I still log a bug against oe-core?
If someone here has some more helpful idea
Hello,
I would like to know how I can set the route metric for specific
interfaces in a recipe. I have two interfaces, one eth0 for debugging
and one ppp0 (modem) for internet connectivity. Since the eth0 interface
has by default a lower route metric, but is not connected to the
internet, I a
ps://bugzilla.yoctoproject.org/show_bug.cgi?id=12025
only that I'm not using different machines. This bug doesn't seem to be
resolved yet.
Our Yocto-distribution is DIGI Embedded Yocto. So non-standard.
Shall I still log a bug against oe-core?
If someone here has some more helpful ideas
's just a misconfiguration
and I need to add something in local.conf or the kernel recipe? Is
systemd necessary? Or am I missing some life-or-death kernel
configuration? It would also be nice if I could avoid the cgroup
re-mounting before starting docker.
Thanks for every answer!
ptography.hazmat.bindings._openssl import ffi, lib
ImportError:
/usr/lib/python2.7/site-packages/cryptography/hazmat/bindings/_openssl.so:
undefined symbol: pthread_atfork
I can't really find much information about how to fix this error,
especially since the pthread_atfork function should al
Hello,
how can I set a another branch, i.e., the SRC_URI variable for a
specific recipe in conf/local.conf? Or more general: how can I change
the variable of any recipe in local.conf temporarily? I tried something
like this already:
SRC_ = "..."
SRC- = "..."
SRC_pn- = "..."
I would like to s
l Eggleton wrote:
Hi Jakob,
On Thursday, 29 March 2018 12:41:33 AM NZST Jakob Hasse wrote:
Right now it's still a mystery for me when bitbake builds the latest
version of a repository and why. I make changes in my code and whether I
commit them or not, sometimes bitbake builds a package
I have to do to build only the latest
version of a repository...
1. When it's local on my computer (with EXTERNALSRC_BUILD_pn- =
"/home/some/local/location/" in local.conf),
2. When I build from a github or any remote repository.
Thanks and Best Regards,
Jakob
--
Jakob Hasse
Soft
Hi Maxin,
thanks, this worked!
All the Best,
Jakob
On 28.02.2018 14:13, Maxin B. John wrote:
Hi Jakob,
On Wed, Feb 28, 2018 at 11:15:42AM +0100, Jakob Hasse wrote:
Hello,
we need to change the tty on which busybox is sitting. Right now I could change
the UART for the kernel and all
|::respawn:/sbin/getty -L ttymxc1 115200 vt100 |
and this
|ttymxc1::respawn:/sbin/getty -L ttymxc1 115200 vt100|
to inittab to change the UART with no luck.
Could someone here point me to documentation or give me a hint to achive
this?
Thanks in advance, all the Best,
Jakob
--
Jakob Hass
2018-02-05 4:58 PM, Jakob Hasse wrote:
Hello Bruce,
Thanks for the reply!
No, the interpreter seems to be different, other executables are e.g.:
# file /usr/bin/python2.7
/usr/bin/python2.7: ELF 32-bit LSB executable, ARM, EABI5 version 1
(SYSV), dynamically linked, interpreter /lib/ld-linux
:05, Bruce Ashfield wrote:
On 02/02/2018 11:21 AM, Jakob Hasse wrote:
Hello,
file says:
# file /usr/bin/docker
/usr/bin/docker: ELF 32-bit LSB executable, ARM, EABI5 version 1
(SYSV), dynamically linked, interpreter /lib/ld-linux.so.3, for
GNU/Linux 3.2.0,
BuildID[sha1
, Bruce Ashfield wrote:
On 2018-02-02 10:57 AM, Jakob Hasse wrote:
Hello Bruce,
Thank you for the advice with the morty branch, this worked perfectly.
Now, however, docker is installed on my Yocto-system but I can't run it:
~# docker
-sh: /usr/bin/docker: No such file or directory
I&#x
ot;docker run
hello-world")?
On my Ubuntu machine, this works, I installed docker and docker.io via
apt, then I could run "docker run hello-world".
All the Best and many thanks in advance!
Jakob
On 26.01.2018 14:05, Bruce Ashfield wrote:
On 2018-01-26 6:52 AM, Jakob Hasse wrot
mmary: There were 2 ERROR messages shown, returning a non-zero exit code.
Do we need to checkout a specific branch or so (though I can't find one
right now)?
Do we need to change some kernel configuration? I added all
virtualization drivers in the "drivers" section of the kernel c
Hello Khem,
thanks for the answer. I'm pretty sure now that it is an ssl problem
(see below).
On 26.06.2017 16:28, Khem Raj wrote:
On Sun, Jun 25, 2017 at 11:35 PM, Jakob Hasse
wrote:
Hello,
I'm trying to run the Mircosoft Azure IoT hub mqtt example
(iothub_client_sample_amqp
system.
The network is also the same as on the host machine.
I would be very happy for ideas about what went wrong here.
Best regards,
Jakob
--
Jakob Hasse
Software Developement
E: jakob.ha...@smart-home-technology.ch
T: +41 44 552 02 66
Smart Home Technology GmbH
www
port/boost/boost_%25.bbappend
On Jun 7, 2017, at 3:46 AM, Jakob Hasse
<mailto:jakob.ha...@smart-home-technology.ch>> wrote:
On 07.06.2017 11:59, VanCutsem, Geoffroy wrote:
-Original Message-
From: yocto-boun...@yoctoproject.org
<mailto:yocto-boun...@yoctoproject.or
On 07.06.2017 11:59, VanCutsem, Geoffroy wrote:
-Original Message-
From: yocto-boun...@yoctoproject.org [mailto:yocto-
boun...@yoctoproject.org] On Behalf Of Jakob Hasse
Sent: Wednesday, June 7, 2017 11:48 AM
To: Yocto List
Subject: [yocto] Building boost-python
Hello,
One of my
/sources/meta-java/ \
/usr/local/dey-2.0/sources/meta-iot-cloud/ \
"
BBLAYERS_NON_REMOVABLE ?= " \
/usr/local/dey-2.0/sources/poky/meta \
/usr/local/dey-2.0/sources/poky/meta-yocto \
"
Any help is welcome!
Jakob
--
Jakob Hasse
Software Developement
E: jakob.ha...@sm
Hi Marek,
On 30.05.2017 11:37, Belisko Marek wrote:
Hi Jakob,
On Tue, May 30, 2017 at 11:28 AM, Jakob Hasse
wrote:
Hi Marek,
please don't top post http://www.idallen.com/topposting.html :)
Thanks for your answer!
I did use a local repo folder since I find it more convenient to make
ated at
/home/jakob/workspace/newuvalue/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/stlink/0.1-r0/temp/log.do_configure.3539)
I have no idea why, but in the original source folder the CMakeLists.txt
is there...
Cheers,
Jakob
On 29.05.2017 21:24, Belisko Marek wrote:
Hi Jakob,
On Mon, May 29
ck a tar.gz out of the checked out source
folder, otherwise bitbake complained.
Is it possible to base a yocto package on a local source folder using
autotools or cmake class?. All the examples I found either use remote
git repos + autotools/cmake or a local source folder without
autotools/cmake.
C
hange to make this work? And is the recipe the
right place for this line (FAQ doesn't mention this)?
Kind Regards,
Jakob
--
Jakob Hasse
Software Developement
E: jakob.ha...@smart-home-technology.ch
T: +41 44 552 02 66
Smart Home Technology GmbH
www.smart-home-tec
pe:
FILES_SOLIBSDEV = "${libdir}/libtr50.so"
FILES_${PN} += "${libdir}/libtr50-*.so"
BTW, missing from your original email were the warnings / errors that you
surely should have seen printed (assuming you haven't disabled them). For
future reference those would have been us
lumn form on my blog at
http://www.kc8apf.net/category/dear-brother-yocto/. (Note to Yocto
experts: I'm certain to get things wrong in my explanations. Please
send in corrections as well. I'm happy to include them.).
Rick
On Fri, Jan 27, 2017 at 6:51 AM, Jakob Hasse
<mailto:j
documentation, then find an existing
recipe that uses "autotools" and another that DEPENDS on openssl.
There are a lot of resources online:
http://www.yoctoproject.org/docs/1.6.1/dev-manual/dev-manual.html#new-recipe-writing-a-new-recipe
https://www.yoctoproject.org/tools-resour
problem is that the lib needs openssl-dev. I can't find how to
include openssl-dev into the Yocto build.
Looking forward for your answers, best regards,
Jakob
--
Jakob Hasse
Software Developement
E: jakob.ha...@smart-home-technology.ch
T: +41 44 552 02 66
Smart Home Technology GmbH
www
35 matches
Mail list logo
