ch 12, 2015 10:01 AM
To: Ian Campbell; Korupol, Naveen (EXT)
Cc: M A Young; xen-de...@lists.xenproject.org
Subject: Re: [Xen-devel] Failed to launch xen on J6 evm
Hi Ian
CONFIG_XEN iand CONFIG_HVC_XEN are enabled =y in .config other config settings
seem to be in line.
getty was not properly se
Hi Ian
CONFIG_XEN iand CONFIG_HVC_XEN are enabled =y in .config
other config settings seem to be in line.
getty was not properly setup in my dom0 settings - thanks
Regards
Naveen
Please note my new email address naveen.koru...@ext.us.panasonic.com. The old
address will be available until Septem
On Wed, 2015-03-11 at 19:38 +, Korupol, Naveen (EXT) wrote:
As Michael says, xm doesn't exist any more (and never existed on ARM),
use xl. But, are you even getting a dom0 cli prompt? It doesn't look
like it.
> (XEN) Std. Loglevel: All
> (XEN) Guest Loglevel: All
> (XEN) *** Serial input -> D
Hi Ian/Team
It finally looks like xen and dom0 are stable, but the cli seems tricky.
I can switch between xen/dom0 but cannot execute xm cmds...
Any idea where I went wrong? Please find the log below - thanks
Regards
Naveen
U-Boot SPL 2015.04-rc1 (Mar 10 2015 - 13:35:08)
DRA752 ES1.1
reading
On Wed, 11 Mar 2015, Korupol, Naveen (EXT) wrote:
> Hi Ian/Team
>
> It finally looks like xen and dom0 are stable, but the cli seems tricky.
>
> I can switch between xen/dom0 but cannot execute xm cmds...
xm was dropped in xen 4.5. Use xl instead.
Michael Young
___
On Tue, 2015-03-10 at 20:52 +, Korupol, Naveen (EXT) wrote:
> (XEN)
> (XEN) Panic on CPU 0:
> (XEN) GICv2: Cannot find the maintenance IRQ
This suggests that your DTB does not describe the maintenance interrupt
on the interrupt controller node.
Ian.
Hi
Got some progress in loading xen hyp and then sits blank.
Here is the log:
U-Boot SPL 2015.04-rc1 (Mar 10 2015 - 13:35:08)
DRA752 ES1.1
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2015.04-rc1 (Mar 10 2015 - 13:35:08)
Hi
Some more progress and then PANIC.. says (XEN) GICv2: Cannot find the
maintenance IRQ
Here is the log:
U-Boot SPL 2015.04-rc1 (Mar 10 2015 - 13:35:08)
DRA752 ES1.1
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2015.04-rc
On Mon, 9 Mar 2015, Korupol, Naveen (EXT) wrote:
> Hi Ian
>
> I am (awesome) glad to see your response.
>
>
> [IC] J6 EVM?
> [NK] is a TI (& Spectrum Digital) evaluation board built on OMAP 5
> architecture which has 2 ARM Cortex-A15 core(s), 2 Cortex-M4 cores and SGX544
> 3D graphics core(s)
ent u-boot to
have this setting enabled.
Thanks
Naveen Korupol
-Original Message-
From: Ian Campbell [mailto:ian.campb...@citrix.com]
Sent: Monday, March 09, 2015 5:55 AM
To: Korupol, Naveen (EXT)
Cc: xen-de...@lists.xenproject.org
Subject: Re: [Xen-devel] Failed to launch xen on J6 evm
On
On Mon, 2015-03-09 at 16:51 +, Korupol, Naveen (EXT) wrote:
Please don't top post and try and configure your MUA for normal ">"
based quoting. Anything else just gets too hard to follow after a little
back and forth.
> Is there any specific U-Boot for ARM with this HYP mode already enabled
>
On Fri, 2015-03-06 at 20:03 +, Korupol, Naveen (EXT) wrote:
> I am using J6 evm.
What is one of them?
> played with couple different u-boots
Does your u-boot launch the kernel (AKA Xen in this case) in NS.HYP
mode?
> If there are any probable fixes/hints for bringing up XEN on J6 evm.
Give
12 matches
Mail list logo
