I have to disagree. I do not like that the report does not change, during the
QSO, when the received strength changes. For example, I call CQ on 144 FT8. I
am beaming West. A station from the Northeast calls me. I receive his call at
-20 dB. I immediately start rotating my antenna to point t
Dwane, I am almost certain that your assumption in incorrect. For WSJT in
general, it does not matter what the settings for the waterfall display are set
to. They have nothing to do with decoding, they provide only visual signal
recognition. So, if there is a decodable signal above the 1500 H
the low end set
to 200 Hz, it shows me everything up to 2600 Hz. That is almost always
sufficient. Don’t see any advantage to asking for a default setting greater
than that.
Russ K2TXB
From: Black Michael via wsjt-devel
Sent: Wednesday, April 5, 2023 12:47 PM
To: k2txb--- via wsjt-devel
e of 200 - 2600 with bin/pixel set at 2, just increase it to 3 or
higher as needed.
73,
Sam W2JDB
-Original Message-----
From: k2txb--- via wsjt-devel mailto:wsjt-devel@lists.sourceforge.net> >
To: 'Black Michael' mailto:mdblac...@yahoo.com> >; 'WSJ
, 1 Jan 2025 at 19:41, k2txb--- via wsjt-devel
mailto:wsjt-devel@lists.sourceforge.net> >
wrote:
Hi all. It seems that in echo mode, WSJT-X is no longer adjusting the TX
tone to compensate for doppler shift.
To test this, I set up on 2 meter EME, with Doppler Tracking enabled but
track mo
waterfall but not at 1500 unless your self Doppler is 0.
More here:
https://drive.google.com/file/d/1SWQUYuZqlvlYow2Kc-OapMRaOc5b-h_n/view?usp=sharing
73
Charlie
On Wed, 1 Jan 2025 at 19:41, k2txb--- via wsjt-devel
mailto:wsjt-devel@lists.sourceforge.net> >
wrote:
Hi all. It
I had / have the same problem. By turning off all virus protection I was
finally able to download RC8. But when trying to install, it gives me a error
“Error opening file for writing: C:\WSJT\wsjts\bin\Qt5Core.dll”
I checked and the file is there and not read-only. I tried this twice with t
Answered my own question. I renamed the WSJT-X folder and then installed the
RC8 version as new. This time the install went as expected and all is well.
73, Russ – K2TXB
W2DRZ Controllers, LLC.
From: k2txb--- via wsjt-devel
Sent: Tuesday, January 14, 2025 7:41 AM
To: 'WSJT sof
Hi all. It seems that in echo mode, WSJT-X is no longer adjusting the TX
tone to compensate for doppler shift.
To test this, I set up on 2 meter EME, with Doppler Tracking enabled but
track mode set to none.
While running echo mode I also observe the frequency of the returned echo on
the WSJT-X wa
